g energy ag used for sale

General SKU056F372 TypeOVA 031.XX 1.5 No.SG 98/01/063 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Volume25 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying oven(1x) make Gallenkamp UK Max. temperature200 Degr. C. Number of compartments:1 Capacity25 Ltr Internal width370mm Internal depth300mm Internal height260mm Electric heating1000 Watt, 220-240 Volt (1 Ph) Number of doors:1 MaterialStainless steel Information With switchcheck Floorspace0,7x0,5 M Total height0,5 M Weight50 KGDrying ovensGallenkamp UkDryers > Drying ovensBrand > Gallenkamp Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

General SKU400X1187 LocationBarneveld CEcheck MakeGross Type1550 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1550 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck (Bioreactor) Capacity1350 Ltr. (1550 Ltr.) Vessel sizesø 1200 x 1819 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (23,5 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Information No.7853 Year of construction2005 Mounted on legscheck and frame Floorspace1,60 ...

Size: 540 mm Equipments: Laminating Speed: 15 mtr/min Laminating Film: OPP PET NYLON. Matt & Gloss plus special digital film Paper Thickness: 120-350 gsm Pressure Control: Pneumatic cylinder Heating System Heating System: Hot roller internal infrared heater Temperature Hot roller internal infrared heater Temperature Range 0-140 C Warm up time: 10 min Automatic Feeder Film Core: 76mm Power Requirements: 220-240V 50/60Hz Power Consumption: 2300W 10 5A Weight: 240 kg Dimensions (WDH): 860 x 1585 x 595 mm

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

General SKU400X1186 LocationBarneveld CEcheck MakeGross Type1550 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1550 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck (Bioreactor) Capacity1350 Ltr. (1550 Ltr.) Vessel sizesø 1200 x 1819 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (23,5 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Information No.7852 Year of construction2005 Mounted on legscheck and frame Floorspace1,60 ...

General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...

General SKU413X1257 MakeGKM Siebtechnik LocationBarneveld CEcheck TypeKTS-1600/4 Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck With extra sieve deckscheck Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.2877 Year of construction2017 Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kgTumbler screening machinesGkm SiebtechnikSieves > Tumbler screening machinesBrand > Gkm Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new  ...

General SKU397X1137 MakeGAB Neumann LocationBarneveld TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite G16-5-180 Heat exchangercheck (cooler/chiller) Notified bodyGAB Neumann Heating surface1,2 m² Tube capacity11,7 Ltr. Number of tubes:1 Tube diameter180 mm Tube length700 mm Max. temperature–30 / +180 °C Shell capacity5,5 Ltr. Shell diameter600 mm Shell length244 mm Max. temperature–30 / +80 °C Shell connectionsDN50 Cover connectionsDN100 Information No.31786—22873 Year of construction2013 Floorspace0,7 x 0,7 m Total height0,7 m Weight300 kgShell and tube heat exchange ...

General SKU397X1135 MakeGAB Neumann LocationBarneveld TypeN-A-1,8 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite G16-5-180 Heat exchangercheck (cooler/chiller) Notified bodyGAB Neumann Heating surface1,2 m² Tube capacity11,7 Ltr. Number of tubes:1 Tube diameter180 mm Tube length700 mm Max. temperature–30 / +180 °C Shell capacity5,5 Ltr. Shell diameter600 mm Shell length244 mm Max. temperature–30 / +80 °C Shell connectionsDN50 Cover connectionsDN100 Information No.29593—22051 Year of construction2013 Floorspace0,7 x 0,7 m Total height0,7 m Weight300 kgShell and tube heat exchange ...

General SKU397X1074 MakeDe Dietrich LocationBarneveld CEcheck TypeZBH5365 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialGlass Volume750 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialGlass - Enamel (3009) Pressure vessels Closed vertical tankcheck Capacity750 l. Vessel sizesDia. 1000x1050 mm Dished bottomcheck OutletDN50 Max. temperature-30°C/+170°C Information No.75628 Year of construction2018 Mounted on legscheck Floorspace1,00x1,00 m Total height1,75 m Weight650 kgPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397X1177 LocationBarneveld MakeGruber Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1602 Ltr. Specified Features - Pressure vessel Reactorcheck Capacity1602 l. Dished bottomcheck Top connectionscheck Outletcheck With jacketcheck volume Max. temperature90°C Pressure vessels MaterialStainless steel 1.4571 (316Ti) Information No.2547 Year of construction1992 Mounted on legscheckPressure vesselsGruberTanks > Pressure vesselsBrand > Gruber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397X1151 LocationBarneveld CEcheck MakeGardner Denver Pressure Working pressure0.033 Bar Main Features MaterialMild steel Volume2500000 Ltr. Motor37 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity2500000 With motor37 kW, 400 V, 980 rpm, (Ex) InletDN125 OutletDN125 Information Type2BE12030BY2-Z Mach.No.7060801002 Year of construction2007 Mounted on framecheck Floorspace2,0x0,65 m Total height1,16 m Weight1380 kgVacuum pumpsGardner Denver NashPumps > Vacuum pumpsBrand > Gardner Denver Nash What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU282X374 MakeAerzen TypeGM60S No.1671044 Year of construction2022/1997 LocationBarneveld Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 M3/min Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm Information Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2022, 120,10 kW, 3000 rpm, : air buffer, 1997, volume 180 ltr, work pressure 1,1 bar, temperature 150°CBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

General SKU282X372 MakeAerzen TypeGM60S No.1585266 Year of construction2017/1997 LocationBarneveld Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56,22 m3/min Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm Information Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2017, 120,10 kW, 3000 rpm, : air buffer, 1997, volume 180 ltr, work pressure 1,1 bar, temperature 150°CBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

STRAND PELLETIZER 300 mm., Machine totally reconditioned, 7.5 kW motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CEI standards - 400 V, 50 Hz, Feeding width 300 mm, fixed pitch, 30 cutting pieces on rotor, widia counter blade, Rubber pressure roller, Cross-knurled tempered drive roller, Double pneumatic piston for pressure roller adjustment, Wire feed roller bench, installed power - used power in work: about 60-65% : 7,5 kw, working width: 300 mm, conditions: as new, type: strand pelletizer for extruders

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313

Key data: 1020 mm, 1 mm

3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685

Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m

max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -

TRIA type 32-20 / JM granulator / crusher in excellent condition New engine installed last month Year: 2010 Shredding chamber dimensions: 320 x 200 mm Power: 4 kW / 5.5 hp Fixed blades: 2 Rotating blades: 3 Rotor diameter: 180 mm Hourly shredding capacity: 40 to 60 kg

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Güntner S-GFD 080A/2x7-L Manufacturer: Güntner Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 1900kW Air temperature: 35º C. Fans: 14 pieces, 0.8kW, 3 wires, 400V, 50Hz Dimensions: LxWxH = 8400x2200x2220mm Weight: 3050kg Sound pressure level: 52 dB(A) 10m distance, Condition: Good , Tested for leaks and fans Test run Jenbacher, Dry cooler, Dry Air Cooler, Emergency Cooler, Dry Cooler.

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Offer 25442 Technical data: - Steel - Stainless steel - Aluminium - Plastic - Machining - Deburring and faceting process is carried out with a milling cutter - Face cutter head with indexable inserts - Motorized feed module - Material thickness up to 100 mm - Facet angle adjustment 25 / 50 + 30 / 60 ° - Bevel width adjustable up to 20 mm - Speed infinitely variable 2000 - 6000 rpm - Feed rate infinitely adjustable - Table size 750 x 400 mm - Drive 400 V / 5.2 kW - Space requirement approx. W 800 x D 1500 x H 1700 mm - Weight approx. 500 kg

This used riveting system from Gesipa is equipped with a spring-loaded release system and comes with Compressed air operated in a range of 5.00 bar to 7.00 bar. Comes with a 17/24 mouthpiece. Blind rivets up to up to 5 mm Ø all materials and up to 6 mm Ø aluminium/steel (max. mandrel Ø 3.2 mm) and offers a Setting force of 11000N.

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

General SKU279X364 MakeHSK Wärmetechnik Gottfried Kneifel GmbH LocationBarneveld CEcheck Pressure Working pressure19 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity250 l. Vessel sizesø 650 x 2300 mm Dished bottomcheck Max. temperature200 °C Information No.2267/1 Year of construction2012 Floorspace1,00 x 1,00 m Total height2,40 m Weight850 kgStainless Steel ReactorsNew arrivalsHSK Wärmetechnik Gottfried Kneifel GmbHReactors > Stainless Steel ReactorsNew arrivalsBrand > HSK Wärmetechnik Gottfried Kneifel GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU311X486 MakeQVF Glasstechnik Type100 l. No.50708323/6025 Year of construction2007 Mounted on legscheck on wheels in frame Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialBorosilicate Glass 3.3 Closed stirring vesselcheck Capacity100 l. (150 l.) Vessel sizesø 450 x 1000 mm Dished bottomcheck Top connectionscheck Outletcheck With jacketcheck Max. temperature—20 / 100 °C, jacket: —20 / 180 °C With propellor stirrercheck Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft47/91/132/173/214/257 rpm Information LocationBarneveld With switchcheck Floorspace1,00x1,00 m Total height2,40 m Weight400 kg CEcheckStirring vesselsQVF GlasstechnikStirring vessels > Stirring vesselsBra ...

General SKU399X1185 LocationBarneveld MakeGünter Pressure Working pressure41 Bar Main Features Heating (medium)Gas Temp.100 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Gas heatingcheck Heating medium:Gaseous Heating capacity—50 / 100 °C Electric capacity230 V Information TypeGCHC RD 045.2/12-48-4239256M Mach.No.404578695/29 00147 Year of construction2017 Mounted on frameOn legs With switchcheck Floorspace2,05 x 0,90 m Total height1,10 m Weight500 kgTemperature control unitsGünterHeat exchangers > Temperature control unitsBrand > Günter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU335X739 MakeNorbert Karasek LocationBarneveld CEcheck TypeTank 1500 L Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1500 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1500 Ltr. (max. 1678 Ltr.) Vessel sizesø 1200 x 1707 Dished bottomcheck Top connectionscheck Outletcheck 2x DN25 (with valve) With jacketcheck (101 Ltr.) Max. temperature145 °C Motor2.2kW, 230/400V, 1410rpm Speed mixing shaft86 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.2639 Year of construction2002 Mounted on legscheck Floorspace1,30 x 1,30 m Total height3,0 m Weight1394 kg Extra SpecificationsComes with 2 sieve CarriersStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless S ...

General SKU300U590 MakeGlatt LocationBarneveld TypeGPCG 1 Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Fluid bed dryer batch MaterialStainless steel 1.4301 (304) Fluidbeddryercheck Granulatorcheck With pancheck (not included is the rotorpan, but with motor: 0,75 kW: speed: 27 m/sek) Capacity5 Ltr. Pan sizesDia. 140x550 mm Capacity1-3 kg With sprayercheck With pumpcheck Motor0,25 kW (Ex) With electric heatingcheck (3,96 kW: 20-100 °C) With fancheck Motor2,2 kW, 220/380Volt, 2870rpm With timercheck Information No.5257 Year of construction1991 Mounted on wheelscheck With switchcheck Floorspace1,8x0,75 m Total height2,2 m Weight450 kgFluid bed dryers batchGlattDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU308T739 MakeAllgaier Werke LocationBarneveld CEcheck TypeWS-GT-0,75 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information No.280 Year of construction2004 With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

General SKU335X732 MakeGEA Westfalia LocationBarneveld CEcheck TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW, 230/400 volt, 1400 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDia. 180 mm Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.1722986 Year of construction2003 Mounted on mild steel frameStainless steel frame With switchgearcheck Floorspace2,50x1,30 m Total height2,40 m Extra SpecificationsVolume 53 l., max operating pressure 2,6 bar, max operating temperature 133°C, : With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature +133°C, allowable temperature jacket, +20°C,  ...

General SKU352X910 MakeGea Niro Soavi LocationBarneveld CEcheck TypeAriete NS2006HS Pressure Working pressure100 Bar Main Features Capacity500 Ltr./Hr. Motor4 KW Pressure100 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity500 dm3/h Twin stagecheck Number of pistons:2 Piston stroke40 mm InletDN25 OutletDN25 Motor4 kW, 400 volt, 975 rpm With variable speed drivecheck With frequence controllercheck With pumpcheck Capacity0,55 M3/h Motor4 kW, 2900 rpm Information No.14073 Year of construction2018 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,30x2,0 m Total height1,87 m Weight515 kg Extra SpecificationsWith Siemens touchscreen control, type Simatic HMIPiston homogenisersGEAMills > Piston homogenisersBrand > GEA What you can expect from Foeth: -- Machine is in working condit ...

General SKU018X226 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Number of1 heads Dosing1000 ml Specified Features - Piston filler MaterialStainless steel Piston filler(1x) Dosing± 250/500/1000 Ml Number of pistons:1 Number of filling heads:1 Pneumatically operatedcheck With hopper(Capacity approx. 20 Ltr) Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height2,0 M Information Weight100 KGPiston fillersGemini TechniekPackaging machines > Piston fillersBrand > Gemini Techniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0100 MakeFIB Type1410 No.8019311 Year of construction1998 Mounted on legscheck Pressure Working pressure10 Bar Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure10 Bar Specified Features - Pressure vessel Capacity200 ltr. Vessel sizesdia. 580x900mm Dished topcheck Dished bottomcheck Top connections5x Outletdia 45mm Max. temperature100 degr. C Information LocationBarneveld Floorspace1,5x0,9 M Total height2,6 M Weight500 Kg Extra Specificationsincluding ITT Jabsco Rotary lobe pump Pureflo 55 series model 55320-15-N200 Pressure vesselsGTI-FIB ProcessTanks > Pressure vesselsBrand > GTI-FIB Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU309N511 MakeGEA Ahlborn GmbH&Co Sarstedt TypeNT-250 S B-10 No.140/10838 Year of construction2007 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface79.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel (Sandvik 254 SMO) Plate heat exchangerscheck Heating surface79,9 m2 Capacity2x 151,8 Ltr Number of platens87 Connections(4x) dia.250mm Max. temperature60 Degr.C. Information Floorspace1,6x0,9 M Total height2,3 M Weight2322 KGPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU282X375 MakeAerzen LocationBarneveld TypeGM60S Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 m3/h Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm Information No.1631094 Year of construction2020/1998 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2020, 120,10 kW, 3000 rpm, : air buffer, 1998, volume 180 ltr, work pressure 1,1 bar, temperature 150°CBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU366W1265 LocationBarneveld Main Features MaterialGlass Volume400 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity400 l. Vessel sizesdia. 600x1500 mm Dished topcheck Dished bottomcheck Outletcheck Information MakeQVF Glasstechnik No.B14. Floorspace0,70x0,70 m Total height2,0 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck Information TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...