g 6200 used for sale

Check valve, check valve -Type: RK 86A DN 32 -Connection: DN32 -Nominal pressure: PN40 -Material: stainless steel -Weight: 0.8 kg

Check valve, check valve -Type: RK 86 DN 25 -Connection: DN25 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.5 kg/piece

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, check valve -Type: RK 86A DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 6x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Number: 2 valves available -Price: per piece -Weight: 1.2 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN32 -Nominal pressure: PN40 -Total length: 28 mm -Material: Stainless steel -Number: 5 valves available -Price: per piece -Weight: 0.8 kg/piece

Check valve, non-return valve -Type: RK 86 -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: Stainless steel -Weight: 3.5 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7.5 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Motor protection switch, star-delta switch, reversing switch -Type: GV3 M10 -Adjustment range in Amps: 4-6 Price: per piece -Quantity: 4x Available -Weight: 0.7 kg

Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg

Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg

end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

Slewing Bearing, Swivel Bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 middle bearing diameter: 260 mm Inner diameter: 190 mm Outer diameter: 329 mm without toothing sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.800. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy to invite you for a viewing. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time o ...

Technical data: Manufacturer: Gildemeister Type: NEF 400 Year of Make: 2007 Control: Siemens 840D ShopTurn Travel X/Z: X 220 mm, Z 700 mm Operating hours: 31,812 h Working spindle Spindle bore: 65 mm Speed: 4,000 rpm Power: 15/12 kW Torque: 400/320 Nm Rapid traverse X/Z: 15 m/min Circumferential diameter over bed: 400 mm Turning length: 650 mm Tool turret Direct recording: 8x Shaft cross-section: 20 x 20 mm Shaft diameter for drill rods: 25 mm Tailstock Tailstock: MK4 Quill stroke: 40 mm Dimensions and weight Dimensions: 2,100 mm x 1,750 mm x 1,710 mm Weight: 2,800 kg Condition Condition: Used Functional: Tested and fully functional

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE120UK-2RS -Number: 3x spherical bearings available Price: per piece -Weight: 7.9 kg

Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Gumasol, solid rubber tires type GLE -Tire size: 4.00-8 -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 410 x 105 mm -Weight: 10 kg/pc.

Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Coil spring, steel spring, compression spring -Diameter: Ø 80 mm -Length: 110 mm -Wire thickness: 7 mm -Number: 144 springs available -Price: per piece -Minimum order quantity: 4 pieces -Weight: 0.3 kg/piece

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

a. 6,000 Bearing Fix Boxes, SSI Schaefer, LF. LF 543 GZW / LF 532 GZW / LF 532 G - used - : Price from location (net) / piece Type LF 543 GZW: 8.-€ LF 532 GZW: 4.-€ Minimum purchase quantity: 3 pallets per type! Manufacturer: SSI Schaefer Type: LF 543 GZW / LF 532 GZW / LF 532 G Year of manufacture: unknown GZW mein with recessed grip and grooves for partition walls G = Recessed grip Colors: mainly blue and red, few in yellow and green Type LF 543 GZW Weight [kg]: 2.73 Recessed grip in the back Content [l]: 57 Inner dimensions (floor) L x W x useful H [mm]: 443 x 425 x 277 External dimensions L x W x H [mm]: 500 x 470 x 300 Usable height in stack [mm]: 277 Material: Polypropylene (PP) Grooves for partition walls: Yes Series: PROFI LF 543 Stackable: Yes Temperature deflection temperature up to [°C]: 40 Temperature deflection of [°C]: -20 Lo ...

Contact Markus Hörmann for more information. Scania G360 Equipment see last picture: - Navigation system, municipal vehicle, Machine designation: sweeper, Meter reading: 208.564 km, colour: orange, cabin: day, Axis configuration: 4x2, power: 265 kW (360 hp), Last inspection: 2024-01, Key: 2x, dirt container, hydrostatic, Drivers cab: transport

High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.

Front brush, front sweeper, sweeping roller, sweeping brush -Side brush: Side brush for sweepers -Drive shaft: Ø 85 mm -Dimensions: Ø 440 x 250 mm -Weight: 2.9 kg

hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg

Engine Brand: HONDA, Conditie: NEW, Engine Cooling Type: Air Cooled , Engine Color: Black , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/honda-gx690-new/860, , = More information =, , Type: Engine, Type of fuel: Petrol, Empty weight: 50 kg, Type number: GX690

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 358 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/251, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V1600 G20F; Transport weight [kg]: 1585

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 358 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/125, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V1600 G20F; Transport weight [kg]: 1700

1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/16, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Blue , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Working Hours: 80 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 2250 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/219081, , = More information =, , Type: Engine, Type number: 16V4000-G83; Transport weight [kg]: 10000

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-engine-new /292, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 7850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 316 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/217789, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: KT-19-M CPL0219; Transport weight [kg]: 2500

Laminating machineSemi-automatic laminating system Hand-fed, but with automatic pneumatic overlap-feeding function with bursting system decurling device for completely flat results Re-winder unit – Gloss, Matt, Hologram, Metallic sleeking film Digital hot foil stamping – without cliché – purely digital – from quantity 1 Working width: 380mm Working speed: up to 10m/min. Freely adjustable laminating temperature (0-150°) Adjustable roller pressure, large chrome roller with a diameter of 100 mm Max. dimension: 380 x 1200 mm (table extension recommended from 600 mm) Min. size: 180 x 210 mm Paper thickness: 120 – 350g/m² LCD display with touch screen

turning diameter: 325 mm turning length: 600 mm control: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/min power capacity: 25 kW y-axis: mm c-axis: total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5x2,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference ID PP-57928 Category Flatbed Die Cutter Manufacturer Gietz Model FSA 790 EFF Year Built 2001 Color - Impression - Working Hours - Speed 5,500 sheets/h Max. size 790 x 560mm Min. Size 297 x 210mm Condition Good Location Europe Availability Immediately Machine Description hot foil stamping and cuting MABEG feeder Transverse foil: 2 axes Longitudinal foil: 3 axes Foil printing option: 2× honeycomb Die-cutting option: Included (die-cutting tool added) Hologram unit: Electronics renewed in 2020 Heating system: 6 heating zones Maximum sheet size: 790 x 560mm Minimum sheet size: 297 x 210mm Maximum stamping area: 720 x 520mm Speed up to 5,500/ hr