128,273 used machines on RESALE, but how to find them? Machine Search
NEW !, 2024 Mustang GRP1000 Demolition & Sorting Grapple, 990 kg, Suitable for 13-19 t excavators, Required dredging power: 300bar, Oil flow rate of the excavator: 50 l/min, Grapple capacity: 70 bar, Oil flow rate of the grapple: 30 l/min, Many more grapples available!
Mustang GRP1500 demolition & sorting grapple, Technical specifications:, - Year of construction: 2025, - Dead weight: 1250 kg, - Suitable for 17-23 t excavators, - required excavator power: 300 bar, - Excavator oil flow rate: 75L/min, - Gripper capacity: 70 bar, - Gripper oil flow rate: 30L/min, Many more grippers available!
NEW, 1640 kg net weight, suitable for 22 - 31 t excavators, oil flow for excavators 90 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts
Mustang GRP450D demolition & sorting grapple, Suitable for 5-12t excavators, With hydraulic rotator, 60cm AB, 145cm opening width, 50cm gripping height when open, Transport dimensions:, - 200cm length, - 70cm wide, - 125cm height, - 600kg
BIG bale fork with gripper, Technical data typical for: MHFRED34HD, - Load capacity: approx. 1,800 kg, - Dead weight: approx. 300 kg, - Number of tines: 3 main tines (for better grip of large bales), Area of application: Round and square bales, silage, hay
blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.
used
NEW UNUSED G3412 year 1995 -470HP- NATURAL GAS only engine
gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.
1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.
Offer 25369 Specifications: - Max. load capacity with full ballast approx. 250 kg - 4 Vacuum Glass Suction Cups 200 mm - Lifting height in the middle of the top suction cup up to approx. 2.5 m - Separate height adjustment + twisting device - min. construction height approx. 1285 mm - max. overall height approx. 2720 mm - max. total length approx. 2100 mm - min. width approx. 620 mm - Net weight depending on ballast approx. 260 to 410 kg - Charger 220 V - Battery 12 V -Operating instructions
BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure
Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...
General SKU352W931 LocationBarneveld MakePowtek LTD TypeP300x450 Nibbler No.P9211 Main Features MaterialStainless steel Motor4 KW Length450 mm Specified Features - Sieve granulator Gratercheck Rotor sizesdia. 300mm x 470mm Sieve sizesdia. 280 mm Sieve perforation8 mm With hoppercheck Inlet600 x 600 mm Outlet450 x 400 mm Motor4 kw (380 V, 1440 rpm, (Ex)) Speed+/- 84 rpm MaterialAluminium, Stainless steel 1.4552, Stainless steel Information Floor space2,0 x 0,7 m Total height1,0 m Weight430 kg ATEX compatiblecheck Extra Specifications- aluminium cladded inlet - Previous use in food industry Technical specs Extra informationscrew dia. 280 mmSieve granulatorsPowtekSieves > Sieve granulatorsBrand > Powtek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...
General SKU339W1248 LocationBarneveld MakePfaudler TypeL 25 No.64061 Year of construction1998 Pressure Working pressure25 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialGlass Volume30 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity30 l., (25 l.) Vessel sizesDia. 560x430 mm Dished bottomcheck Dished top sidecheck ManholeDN400 Top connectionscheck OutletDN50, With manual valve With jacketcheck 15 l. Max. temperature-10°C/+200°C With propellor stirrercheck Motor1,5 kW, 230 volt, 1405 rpm, (Ex) Speed mixing shaft150-1500 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information Total height1,90 m Weight700 kg CEcheck Floorspace0,70x0,70 m Extra Specificationswith bottom outletvalveGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke What you can expec ...
General SKU418W1327 LocationBarneveld MakeDeDietrich TypeAE-250 No.66453 Year of construction2005 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume327 Ltr. Motor1.35 KW Specified Features - Glass-lined Reactor Reactor1 Capacity327 l. Vessel sizesDia. 700x745 mm Dished bottomcheck Dished top sidecheck ManholeDia. 150 mm Top connections3x dia. 80 mm, 2x dia. 50 mm OutletDia. 40 mm With jacket77 l. Max. temperature-25°C/+160°C With propellor stirrerImpeller Motor1,35 kW, 500 volt, (Ex) Speed mixing shaftVariable Glass Reactors MaterialGlass - Enamel (3009U) Information Total height3,0 m Weight1150 kg Floorspace1,2x1,2 mGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condi ...
General SKU366W1249 LocationBarneveld MakePfaudler-Werke TypeBE 4000 No.37230 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity5390 l., (4000 l.) Vessel sizesdia. 2000x2100mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck 4 blade cryo lock agitator Motor11 kW, 380 volt, 1450 rpm Speed mixing shaft125 rpm Glass Reactors MaterialGlass - Enamel Information Mounted on legscheck CEcheck Floorspace1,8x1,8 m Total height1,7 m Technical specs Extra informationVolume 605 l., allowable temperature -25°C/+200°CGlass-lined ReactorsPfaudler-werkeReactors > Glass-l ...
General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect ...
General SKU234T258 LocationBarneveld Makeunknown Main Features MaterialStainless steel Motor0.37 KW Width85 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesDia. 85x87 mm Sieve sizesDia. 85x90 mm Sieve perforation± 3,5x3,5 mm With hoppercheck Motor0,37 kW, 220-240/380-415 Volt Speed149 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchgearcheck (as is) Floor space0,85x0,7 m Total height1,1 m Weight80 kgSieve granulatorsPowtecSieves > Sieve granulatorsBrand > Powtec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU303N411 LocationBarneveld MakeFrewitt Fribourg TypeSG-200 Year of construction(unknown, manufactering tag is missing Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sieveSieving, sizing and rasping machine Sieve sizesdia.200mm x160mm Sieve perforation+/- 3mm Inletdia.200mm Outletdia.250mm Motor4 KW (Ex) With variable speed drivecheck Speed257-1472 rpm MaterialStainless steel Information With switchcheck Floor space1,5x1,2 M Total height1,4 M Weight300 KG ATEX compatiblecheckSieve granulatorsFrewitt FribourgSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...
General SKU354T996 LocationBarneveld MakeArtech TypeTR-410 No.416027.001 Year of construction2004 Main Features MaterialStainless steel Motor7.5 KW Width400 mm Specified Features - Sieve granulator Granulating sievecheck Gratercheck Rotor sizesDia. 390x390 mm Sieve sizesDia. 400x400 mm Sieve perforation1,9 mm Inletdia. 163 mm Outlet890x450 mm Motor7,5 kW, 400 volt Speed750 rpm MaterialStainless steel 1.4401 (316) Information Mounted on stainl. st. framecheck Total height1,8 m Weight650 kg CEcheck Floor space1,5x1,0 mSieve granulatorsArtechSieves > Sieve granulatorsBrand > Artech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU315U727 LocationBarneveld MakeSklenar TypeDKS-250 A No.20-18-025/21-0100000-00 Year of construction2018 Main Features MaterialStainless steel Motor2.2 KW Width300 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Sieve sizes350 mm Sieve perforation5 mm With hopper515x480 mm Inlet490x330 mm OutletDia. 300mm Motor2,2 kW, 230/400 volt With extra sieves3x 2-10 mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight250 kg CEcheck Floor space0,79x1,19 m Total height1,4 mSieve granulatorsSklenarSieves > Sieve granulatorsBrand > Sklenar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...
General SKU354T983 LocationBarneveld MakeWuxi Intech Typeunknown, missing typeplate Main Features MaterialStainless steel Motor7.5 KW Width140 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 140x360 mm (2x) Sieve sizesdia. 140x415 mm (2x) Sieve perforation1,5 mm With hoppercheck Inlet560x400 mm Outlet450x460 mm Motor7,5 kW 380/660 Volt MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck With switchcheck Floor space1,5x0,7 m Total height1,3 m Weight800 kgSieve granulatorsWuxi Intech MachinerySieves > Sieve granulatorsBrand > Wuxi Intech Machinery What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...
General SKU354T987 LocationBarneveld MakeArtech GmbH TypeARTOFEX TR-210 No.416026.006 Year of construction10-2002 Main Features MaterialStainless steel Motor3 KW Width245 mm Specified Features - Sieve granulator Gratercheck Rotor sizesDia: 245x245mm Sieve sizesDia: 250x245mm Sieve perforationDia: 1,2mm InletDia: 115mm Outlet890x300mm Motor3kW, 380-420/660-720Volt, 1420 rpm Speed688 rpm With extra sievescheck1 piece, 1,2mm MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Information Mounted on stainl. st. framecheck With switchcheck With switchgearcheck(as is) Weight410kg CEcheck Floor space1,35x1m Total height1,8mSieve granulatorsArtechSieves > Sieve granulatorsBrand > Artech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...
General SKU213W141 LocationBarneveld MakeL.B. Bohle TypePFG600 No.91013711 Year of construction1992 Main Features MaterialStainless steel Motor0.75 KW Width200 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesDia. 200 mm x 400 mm Sieve sizesDia. 210 mm x 400 mm Sieve perforation0,8 mm With hoppercheck InletDia. 170 mm Outlet430 x 310 mm Motor0,75 kW ,380V ,1600 rpm With variable speed drivecheck Speedmax. 320 rpm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight130 kg Floor space1,10 x 1,10 m Total height1,50 mSieve granulatorsLB BohleSieves > Sieve granulatorsBrand > LB Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...
General SKU213T1392 LocationBarneveld MakeRubitec AG TypeVMT 200 No.071080 Year of construction2007 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 190x100 mm Sieve sizesDia:260x130 mm Sieve perforationDia: 5 mm OutletDia: 300 mm Motor4kW,220-240/380-415Volt, 2905rpm(EX) Speed100-1000 U/min MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck Total height0,88 m Weight230kg Floor space1,0x0,60 m ATEX compatiblecheck Extra SpecificationsAtex II3GSieve granulatorsRubitecSieves > Sieve granulatorsBrand > Rubitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...
General SKU445W1480 LocationBarneveld MakeColortronic TypeM253-ST-ÜFS-2.2KW No.69990109 Year of construction1999 Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Information Mounted on framecheck With switchcheck Weight150 kg Floorspace0,80x0,50 m Total height1,10 m Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
General SKU445W1539 LocationBarneveld MakeColortronic TypeM253-ST-ÜFS-2.2KW No.69990108 Year of construction1999 Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck InletDia. 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Information Mounted on framecheck With switchcheck Weight150 kg Floorspace0,80 x 0,50 m Total height1,10 m Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...
General SKU242X186 LocationBarneveld MakeKEK Type4808 beta No.47805 Year of constructionunknown Main Features MaterialStainless steel Motor7.5 KW Width200 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizesDia 200x200 mm Sieve sizesDia 200x200 mm With hoppercheck 500x500x400 mm Inlet250x120 mm OutletDia. 550 mm Motor7,5 kW, 380 volt Information Mounted on mild steel framecheck Total height0,90 m Weight320kg Floor space1,45x0,76 mSieve granulatorsKemutecSieves > Sieve granulatorsBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU339W1551 LocationBarneveld MakeChemical Reactor Service H. Balfour No.98858/3 Year of construction1976 Pressure Working pressure2.76 Bar Vacuum possiblecheck Working pressure jacket5.17 Bar Main Features MaterialGlass Volume190 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel Glass Reactors Reactorcheck Capacity190 l. Vessel sizesDia. 800x900 mm Dished bottomcheck Dished top sidecheck Manholecheck DN300 Top connectionscheck Outletcheck With jacketcheck With propellor stirrercheck Motor1.1kW, 400V, 1420rpm (EX) Information Mounted on legscheck Floorspace1,10x1,10 m Total height3,00 m Weight500 kg ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Read ...
General SKU290X387 LocationBarneveld MakePfaudler Werke TypeAE 100 No.128317 Year of construction2003 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l., (100 l.) Vessel sizesDia. 600x500 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 with valve With jacketcheck volume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5 kW, 500 volt, 1405 rpm, (Ex) Speed mixing shaft23-232 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information Total height2,40 m Weight560 kg CEcheck Floorspace0,90x0,90 m ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke What you can expect ...
Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 25 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 35 T, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T
Guillotine, reel slitters for paper and plastics 25 T, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T
Guillotine, reel slitters for paper and plastics, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety cond ...
Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.
General SKU239X178 LocationBarneveld MakeNica Systems TypeAeromatic M6 No.10046-5 Year of construction1991 Main Features Motor8.1 KW Width160 mm Specified Features - Granulator MaterialStainless steel 1.4306 (304L) Rotor sizesDia. 160x10 mm Ring diecheck Number of dies available:1 Die perforationslot height 14 mm Motor8,1 kW, 220/380 volt, With variable speed drive25-150 rpm With metering screwcheck Screw sizesDia. 70x300 mm, pitch 40 mm Information Mounted on wheelscheck Total height1,80 m Weight450 kg Floorspace1,00x0,80 m Extra Specificationspowder/fluid mixer. With dosing pump, 35-200 rpm, cap. 6cm3/ h GranulatorsNica SystemsCompactors > GranulatorsBrand > Nica Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...
General SKU445W1538 LocationBarneveld MakeMüller AG TypeSM 252 No.25213002 Year of construction2013 Main Features Motor3 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter150 mm Number of rotor knives20 Knives staggeredcheck Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor3,0 kW, 230/400 volt, 1425 rpm Rotor speed100 rpm Capacity50 kg/h Information Mounted on framecheck With switchcheck Weight350 kg CEcheck Floorspace1,20 x 0,60 m Total height1,40 m Extra SpecificationsRotor speed 100 rpm, 20x rotor blades, 2x stator blades, With Colortronic metal seperator, type SF 100GranulatorsMüller AGMills > GranulatorsBrand > Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...
RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000
maximum number of results exceeded
please refine your search
