g 6200 used for sale

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Key data: 2500 V, 11000

2 x Caterpillar G3520H Natural Gas Generating Sets Scope of supply: Engine, Alternator, Base Frame and boxes of ancillaries as delivered from Caterpillar as part of factory scope of supply. Complete engine inspection undertaken in july 2025. Turbo found to be in as-new condition. Cylinders found to be in as-new condition. Crankcase doors were removed to inspect crank and connecting rods, all found to be in as-new condition. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...

1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).

1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

Key data: 48 KW, 60 kVA, 400 V

In stock now! 30 months warranty! Perkins Engine Stamford Alternator ComAp Control ABB Disconnect Switches Generator Set Specifications: Model No.: EQ-P6048 Continuous power (Prime Rating): 60 kVA / 48 kW Emergency power (standby rating): 66 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Perkins Engine Model: 1103A-33TG2 Bore x Stroke (mm): 105 x 127 Displacement (L): 3.3 Compression ratio: 17.3:1 Intake system: turbocharging & intercooler Fuel System: In-line Injection Regulator Type: Mechanical Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1258 mm Weight (open): 1085 kg Standard: 4-stroke, 1500 rpm, water-cooled robust diesel engine Leroy Somer Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Preheater  ...

Key data: 36 KW, 45 kVA, 400 V

Manufacturer's warranty of 30 months Stamford alternator Control of ComAp ABB Circuit Breakers Call us directly at +49 176 82370794 Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...

GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT T5863094 seller offer No. resale 167424183

Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

Gas Booster: Pump for compressing gases. Also for decanting and refilling gas cylinders or gas storage tanks. Suitable for e.g. for hydrogen, helium, nitrogen, argon, compressed air, mixed gases and diving gases... Max. pressure 480bar, drive with compressed air 1.5- 8 bar. I = 60:1

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...

Natural Gas Generator Niigata 2 x 2880 kW / 60 Hz with Auxiliaries Two well maintained natural gas generators manufactured by Niigata in 2005, electrical capacity 2 x 2880 kW / 60 Hz. The plant was operated till 2020 and maintained according to Niigata maintenance instruction, last scheduled 30000 hour maintenance for both engines was carried out in April 2019. Plant was professionally dismantled on 2022 and total 31000 operating hours with mechanical and electrical indoor auxiliaries. Plant control system, mechanical indoor auxiliaries, HV breakers and MCC cabinets belongs to the scope of supply Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets 2 pcs Running hours approx. 31100 – still in operation Voltage 3450V / 60 Hz Frequency 60Hz Alternator ...

We are offering for sale a 3 tn per hour copper cable granulation line consisting of: - MEWA UG 1600 granulator, - Two pieces of turbo mill 90 kw each, - Dry separation table MTB T1000XT1500, - 1 linear screen, - 2 pieces of wet separation table, - Fans, cyclone, piping and filter. This line can process unsorted copper cables with steel attachments and WEEE scrap. Production capacity is 3,000 kg per hour for copper cables. Find more here - / Contact us at -

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

X-travel 420 mm YWeg 270 mm Table size 254 x 482 mm Projection 254 / 318 mm Grinding spindle speeds 12 - 60,000 rpm Spindle stroke 92 mm Spindle speeds 90, 136, 184, 280 rpm Stroke rate, adjustable 2 - 120 strokes at 51 mm Accuracy 1.25 μm at 30 mm Compressed air connection 7 bar Machine weight approx. 1700 kg Dimensions approx. 1.45 x 1.2 x 2.4 m

COMIFLEX C.I.GEARLESS VALE 1208, Fully Automatic, suitable for PE, PP, OPP, PET, Paper, Ink Pump – Phonematic with Autowash, FIFE Camera System, Material width - 1.280 mm, Print width - 1.200 mm, Min/Max repeat length - 380/840 mm, Machine speed - 300m/min., 8 Colours, N.14 Anilox cylinders, n.216 sleeves, n.2 web guides, n.2 stretching rollers, Face Length – 1.260mm, Engrave Length – 1.240mm, OD – 171.88 mm, ID – 149.722 mm, 8 sleeves:, ID – 114.708 mm, Face Length – 1210 mm, Standard Turret unwinder; non-stop Max roll diam.: 800 mm Expanding shafts: 3”, Double unwinding shaft, dancing rollers. Max roll diam.: 800 mm Expanding shafts: 3”, Electrical drying system, n.8 self washing pneumatic pumps, The Printer is in immaculate showroom condition and has been serviced only by the manufacturer., Full service history available., availability: immediate, working width: 1200 ...

Serial no. 18W3950940, Prime Power 720kW 900kVA, Standby power 800kW 1000kVA, Power factor, pf 0.8, Voltage, V 415, Current, A 1252, Speed, RPM 1500, Weight, kg 11,000, Contact: Ms Sabrina (60177418071)

Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

Edge Grinding Machine Gartner FLK 4 -used-incl. Mitre stop---------- Technical data ----------sanding belt width: 200 mm, sanding belt length: 2,350 mm, dimensions work table: 870 x 400 mm, belt speeds: 4, suction nozzle Ã: 80 mm, motor: 3 kW

Height=1.47 m, Overall length= 1.5 m, Overall width= 1.75 m, Net weight= 542 kg,

gebr. Double Bench Grinder Fabr. Griffin Diameter 200 mm Revolutions 3,000 rpm.

Availabel from German Stock ! 80x Part number Cat 229-9942 - Cylinderheads Gas Engine Serial G3512, G3516, G3520 Partnumbers CAT 415-5584, 315-2630, 315-2632 Naket Cylinder Heads

Key data: 3530 KW, 1000 1/min

One (1) fully rebuilt Caterpillar G3616, 4750 HP, 1000 RPM, ADEM 3, TPS Turbo chargers, 9:1 compression ratio, Paint - Industrial Gas Compression Gray Epoxy, Two (2) Hours Caterpillar Dyno tested, Engine includes a Caterpillar Parts Warranty. APPLICATION: GAS COMPRESSION.

Key data: 2647 KW, 1000 1/min

Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesﻠ...

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

- Model: MAX 80 CNP - Manufacturer : Glaston - Year of manufacture : 2015 - Condition: Used Includes water reservoir tanks and cerium mixing tank with all equipment and several consumable spear parts. Find more here - / Contact us at -

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Danoflex Ø 800 mm cylindrical abrasive grinding

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators

NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

BIG Genie Terex adapter suitable for Manitou mount, - New product, - Year of manufacture: 2025, - Weight: ~ 150 kg, Many other adapters available for a wide variety of mounts !

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW, 690 kg net weight, suitable for 7 - 16 t excavators, oil flow for excavators 45 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW !, 2024 Mustang GRP1000 Demolition & Sorting Grapple, 990 kg, Suitable for 13-19 t excavators, Required dredging power: 300bar, Oil flow rate of the excavator: 50 l/min, Grapple capacity: 70 bar, Oil flow rate of the grapple: 30 l/min, Many more grapples available!