130,792 used machines on RESALE, but how to find them? Machine Search
including speed regulator and a foot. Without belt. 0,75 Kw
The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m? Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 ?C Minimum temperature: 0 ?C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 ? 17 ?C, ?p = 47 kPa) Hot water: 2,000 L/h (cooling 30 ? 24 ?C, ?p = 22 kPa) Fruit juice: 240 L/h (heati ...
Single capping head, Working direction: left-right, Without cork orientator.
Capacity: max. 1800 kg/hr, Water inlet: 2 3/4, Water outlet: 2 x 2, Infeed height: 1103 mm, Outfeed height: 771 mm, Power: 3 x 400V, 50Hz, 5.9kW, Dimensions: 3807 x 991 x 1500 mm, Weight: 583 kg
Used industrial machine offered by IBEXTRA.
Used industrial machine offered by IBEXTRA.
Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.
Stabilized Courses X 350 Y 250 Z 300 Table 500 x 400 mm. Maximum part size to be machined 790 x 530 x 275 mm. Workpiece basin dimensions 790 x 530 x 350 mm. Linear guides. Maximum workpiece weight 500 kg. 80 A ISPG generator ITS HEAD AXIS C 16 ELECTRODE CHANGER with MINI 32 system. 410 liters dielectric tank.
- Underfloor suction feeder - Infeed width max. 36 cm - GUK MCS-106 preselection counter - 4 parallel folding buckle plates - Belt delivery, Construction year: 2008
This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details.
Manufacturer: Klieverik Type: GTC-3400 Year of Manufacture: 2005 CE Mark: Yes Working width: 3,400 mm Voltage: 400 V / 50 Hz Current: 27 A Find more here - / Contact us at -
: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 € : 1 : 1300 mm : 150 mm : 150 mm : 250x350 mm : 945 mm : 0.75 kW : 1400 mm : 1000 mm : 1450 mm : 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled th ...
A 3D coordinate measuring machine Hexagon is available. Measuring range X/Y/Z: 2200mm/1200mm/1000mm, swiveling head: TesaStar, probing system: TP20, probe length: 50mm, probe diameter: 5mm, temperature compensation: Clima, max. measuring speed: 300mm/s, machine dimensions X/Y/Z: approx. 3600mm/3450mm/2300mm, weight: approx. 5700kg, calibration: 02/2024. Documentation available. An on-site inspection is possible.
Key data: 7200 mm, 4100 mm, 1250 mm
Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device
Key data: 4000 mm, 2700 mm, 1250 mm
Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads
The conical rounder is intended exclusively for rounding dough pieces. Wheat and mixed wheat doughs up to 70/30 in the weight range of 30 – 1,800 grams and output of max. 5,000 pieces/h (depending on weight) can be rounded. Condition: in operation, fully functional Availability: from week 25 (2026) Operating voltage: 400 AC Control voltage: 24 V DC Power: 6 kVA Frequency: 50 Hz
General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...
General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...
Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
pressure: 160 t chamfer lenght: 3200 mm Control: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 15600 € : 299.52 € : 55 to : 750 mm : 40x10 mm : 37 1/min : 5 kW : 1930 mm : 1200 mm : 1800 mm : 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 € : 430.08 € : 80 to : 300 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) option ",Kit", EURO 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22 ...
max. wheel diameter: 450 mm max. module: 4 mm internal dia. - min.: 100 mm internal dia. - max.: 300 mm Maximum permissible peeling wheel diameter: 175 mm Diameter of the installation area: 125 mm slide travel X-axis: 350 mm slide travel Z-axis: 300 mm slide travel Z-axis: 440 mm Largest swivel range of the peeling head: ±25 Grad workpiece table outer diameter: 570 mm Workpiece table – Maximum permissible load: 5 kN Feed - X: 12000 mm/min Feed - Y: 5000 mm/min Feed - Z: 8570 mm/min Tools speed: 0-3000 U/min Workpiece table speed: 0-1500 U/min voltage: 400 V Control: weight of the machine ca.: 11 t dimensions of the machine ca.: 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was cr ...
Motor 18.5KW Rotor length 600mm Hydraulic Moving Floor Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.
General SKU432X1357 MakeGlatt AG TypeGHT-U-250 Machine number101.145 Year of construction1993 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying ovencheck (Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trayscheck 24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck Drying ovens Tray sizes500 x 800 x 35 MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck (as is) Floorspace1,1 x 1,8 m Total height2,2 m Weight800 kgDryin ...
General SKU050F238 TypeGHT-400 Glatt Horden Trockner LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven MaterialStainless steel 1.4301 (304) Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm Information No.101010 Year of construction1991 With switchgearcheck Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX compatiblecheckDrying ovensDiscountGlattDryers > Drying ovensDiscountBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a ...
Column Drill GILLARDON GB 25 – Precision Column Drill For sale is a high-quality column drill from the renowned manufacturer Gillardon, model GB 25. The machine impresses with its robust design, precise operation and versatile applications and is ideal for workshops, locksmiths, metalworking as well as drilling and threading work. ⸻ General information: • Machine type: Column drilling machine • Manufacturer: Gillardon • Model: GB 25 • Condition: Used, good general condition, fully functional • Availability: Immediately available ⸻ Technical data: • Drilling capacity steel: 32 mm • Casting drilling capacity: 35 mm • Speed range: infinitely variable 60 – 1800 rpm • Direction of rotation: clockwise/counterclockwise rotation • Tool holder: Morse taper MK 3 • Projection: 290 mm • Quill stroke: 175 mm • Table surface: 450 × 360 mm ...
EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke
: neu : 2026 : 090194 : Mai 2026, Zwischenverkauf : Spanien : 22400 € : 430.08 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: CMZ Machine type: CNC Lathe Model: TTL-52-52-T1M-T2M+GL20II Year of manufacture: 2021 CE certified: Yes Key Features - 2-spindle automatic CNC lathe for series production - Integrated stacking magazine for automated part loading - Integrated robot GL20II for fully automated production cycle - Designed for high-volume precision series parts Electrical and Mechanical Data - Supply voltage: 400 V AC - Phases: 3 + N + PE - Frequency: 50 Hz - Max. power: 90 kVA - Max. current: 125 A - Pneumatic pressure: 6 bar - Machine weight: 11,000 kg Find more here - / Contact us at -
: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 € : 464.64 € : 80 to : 750 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : EC0009 : 72 € : 1 for tubing diameter: 3/4 gas / 26,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 400 mm stroke: 355 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 6,9 kW volt: 380 V ampere: 21 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=2.23 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 235 kg,
Height=1.79 m, Overall length= 2.96 m, Overall width= 3.35 m, Net weight= 7000 kg,
Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - / Contact us at -
: neu : ca. 8 Wochen ab Auftragse : Spanien : 15800 € : 303.36 € : 1 : 50 to : 177 mm : 5 : 1 : 31 x 12 mm : 34 1/min : 350 x 15 mm : 80 x 8 mm : 35 / 30 mm : 10 mm : 100 x 10 mm : 3 kW : 1300 mm : 1100 mm : 1850 mm : 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was c ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 € : 947.36 € : 130 to : 600 mm : 5 : 2 : 50x18 mm : 80 mm : 600x18 (max. 600x20 mit D mm : 120x120x11 (max. 150x150x mm : 45/40 mm : 130x12 mm : 250x12 mm : 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable ...
material thickness: 0,5-50 mm material width: 1500 mm feed: 4 m/min Operating hours: 900 h weight of the machine ca.: t : dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=2.23 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 235 kg,
- Incl. grease trap and water softener - Machine must be dismantled (Water and electrical pipes are still connected)
Information: Pick-up also in 48155 Münster for an extra charge in the amount of 50.00 euros net per barrel.
Genlab Airflow Oven Model: MPO/450H/TDIG/HD Double Door 240V, 1PH, 50/60HZ Load: 3.0kW
Genlab Oven Model: PRO/100/TDIG Internal dims 485 w x 445 h x 415 deep Volts 240 AC, 1 PH, 50/60 Hz Load 1.5 KW, 6 amps Year 2023 CE marked
maximum number of results exceeded
please refine your search
300 € 
