g 6200 used for sale

Stream Feeder, Alcolor Dampening with Baldwin Cooling Circulation

Manufacturer: Bizerba Model: GLM-I Year of Manufacture: 2006 Condition : Regularly serviced unit. Major components professionally refurbished by a certified Bizerba technician. Machine was fully operational until replaced and was used daily. Technical Specifications - Maximum weighing capacity: 6 kg - Minimum weighing capacity: 20 g - Scale interval (e=d): 1 g - Power supply: 230 V / 50 Hz / 2.4 A - Calibration zone: 2 - Approved for use as control measuring device for packages up to 50 e up to maximum load Calibration:Calibration expired December 2025. Find more here - / Contact us at -

A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.

turning diameter: 410 mm turning length: 800 mm control: Sinumerik 840 D ERGOLine Siemens greates pass round over bed: 700 mm max. turning diameter: 410 mm travel -x axis: 300 mm travel -z axis: 850 mm turning speed range - spindle: max. 4.000 U/min chucking diameter: 260 mm spindle bearing diameter: 130 mm power capacity: 40% ED = 34 kW power capacity: 100 % ED = 25 kW max. Torque: 280 Nm C-Axis: 0,01 ° turret (x-stations): 12 tool taper: DIN 69880 / 40mm driven statition: 6 pos Spindle speed driven tools: ~ 4.000 min -1 power capacity - driven tools: 40% ED = 11,3 kW power capacity - driven tools: 100 % ED = 5,6 kW rapid traverse ( X / Y / Z ): 30 m/min Tailstock:: tailstock adjustment: 800 mm morse taper: MK 5 total power requirement: 65 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 5,5 x 3,0 x 2,5 m Chip conveyor: Tool drive mechanisum: Tailstock: Three Jaw ...

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

Cutting height at 90Â: 200 mm; Cutting length: 410 mm; Saw blade swivel : yes; Saw blade tiltable: no; Roller conveyor / support table: no; Saw blade diameter: 500 mm; Speed: 2800rpm; Motor power: 5 kW; Engine brake: yes; Feed Brake: Yes, Hydraulic; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting height at 90Â: 135 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Hold-down: yes; Spraying device: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counters; Swivel angle indicator: mech. Counters; Milling stop indicator: mech. Counters; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Number of spindles hole row: 11; Number of spindles horizontal: 3; Cup belt drill head: yes, Blum; Drill pitch: 32mm; Power consumption: 2.2kW; Drilling unit: swivelling;

Roller conveyor length: 3000 mm; Roller conveyor width: 400 mm;

Roller conveyor length: 3000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Roller conveyor length: 4000 mm; Roller conveyor width: 300 mm; Rollers: Steel; Stop flap with Scala: Yes;

Roller conveyor length: 6000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Offer 25074 Technical data: - Load capacity horizontal position 600 kg - Face plate diameter 1000 mm - Face Plate mot. Swivel - Face plate speed electr. Infinitely variable - Welding current transmission 500 A - Drive 400 V - Table height in horizontal position 900 mm - Footswitch - Space requirement approx. W 1000 x H 900 x D 1350 mm - Weight approx. 450 kg

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information.

On offer is an electric burger patty forming machine from Gesame Food Maschinery for portioning and forming minced meat/fish/potato or other masses. Technical data: Manufacturer: GESAME Food Machinery Model: MH-100 A Serial No.: 101654 Year of Make: 2020 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. The device has not been tested for functionality and completeness, so a viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms an ...

Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New

Grafoteam PST 480 N Pressure Plate Stacker; cleaned and tested; height-adjustable; Format 811x1200mm; incl. Printing plate trolley. Plate stacker Grafoteam PST 480 N; cleaned and checked; adjustable in hight; size 811x1200mm; included plate trolley.

Garos GBT300 Totebin tumbler 2018, Stainless, totebin mixer, the complete answer for tumbling, mixing, coating and marinating, HMI touch screen controls with programmable cycles, 3Ph

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

65,700 liter ZKG tank/ pressure tank/ storage tank with cooling jacket and insulation Material No. V2A Year of construction 1990 Total height 10580 mm Cylinder length 5750 mm diameter 3400 mm Outer diameter 3870 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

General SKU328X701 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.6040 Year of construction2007 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Year of construction 1996 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

General SKU328X703 LocationBarneveld CEcheck Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information MakeGeiger Maschinebau AG TypeD-1200-K Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE, with cooling jacket and insulation Material No. V2A Year of construction 1995 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

General SKU328X699 LocationBarneveld CEcheck MakeGeiger Maschinebau AG Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information Type1200-HSK Year of constructionD-1200-K/3SWFK Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground

General SKU328X702 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3Sw Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.5480 Year of construction1995 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

53,700 liter brewing water tank with insulation, built in 2022 Material No. V2A Total height 10500 mm Height 9700 mm diameter 2800 mm Outer diameter 3230 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Year of construction 2022

General SKU328X700 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Dissolvers Capacity3900 l/h Information No.6163 Year of construction2011 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU328X698 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200xHSK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information No.5235 Year of construction1990 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4200x2200x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based o ...

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw compressor Atlas Copco GA11VSDFF Inverter and dryer integrated 11 kW 12.75 bar 1.84 m3/min Year of Make: 2011 Hours: 50,496

Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

weight max. in kg: 5000 kg fork length: 1500 mm stroke: 5500 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ? m Forklift 5 to 5200 Working Hours Fork Lenght 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.