g 6200 used for sale

Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, ball valve -Manufacturer: Danfoss, ball shut-off valve, unused in original packaging -Type: GBC 10s/009G7031 -Connection: 10 mm ODF -Dimensions package: 200/75/H55 mm -Weight: 0.3 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Safety barriers for work platforms, lifts, scissor lifts, aerial work platforms, lifting platforms, personnel lifts, safety barriers, protective wire mesh barriers, safety roller barriers -Safety grille: wire mesh, for scissor lifts or other uses -Wire thickness: 1.5 mm -4 rolls: Width 2.55 m (Length approx. 15 m) -Price per roll: 520 EUR net -2 rolls: Width 2.01 m (Length approx. 15 m) -Price per roll: 480 EUR net -Overall dimensions: 2850/720/H660 mm -Total weight: 450 kg

Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Gefran, Linear Wegaufnehmer -Type: PK-M-0450-L-XL0191 -Measured length: 450 mm -Dimensions: 645/80 / H60 mm -Weight: 1.0 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Gefran, Linear Wegaufnehmer -Type: PK M 575 L XL0191 -Measured length: 575 mm -Dimensions: 770/40 / H60 mm -Weight: 1.2 kg

Gear motor, electric motor, three-phase motor, door drive, roller door drive, sectional door drive, electric gear motor, electromat -Manufacturer: GfA, Elektromat type SE 3.5.120-25.00 -Speed: 120 rpm -Motor: Siemens, power 0.37 kW -Shaft: Ø 25 mm -Protection class: IP 55 -Dimensions: 375/140/H245 mm -Weight. 12 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.18 kW 76 rpm -Conveyor speed: 25.05 m/min -Roller width: 1000 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 960 mm, adjustable -driven: via belt -Number: 3x roller conveyors available -Price: per piece -Dimensions: 1400/1150/H960 mm -Weight: approx. 230 kg

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Servo motor, electric motor, DC motor -Geared motor comes: from a plasma cutting machine -Manufacturer: SATO -Type: SATRONIK -Max. Speed: 3000/96 rpm -Power: 0.21 kW -Torque motor: Nm -Shaft: Ø mm -Construction: B5 -Gearbox manufacturer: alpha Getriebebau -Type: TP 010-MF2-31 -Translation: 1:31 -Dimensions: 380/118/H130 mm -Weight: 7.5 kg

Roller conveyor, roller track, powered roller conveyor, roller track -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 820 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven via belt -several roller conveyors available Price: per piece -Dimensions: 1280/1500/H1020 mm -Weight: 219 kg

-Roller conveyor, roller track, roller conveyor, powered roller conveyor -stable design -electrically: powered -Drive motor: 0.37 kW 76 rpm -Roller width: 820 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 950 mm, adjustable -driven: via belt -Dimensions: 1150/1400/H960 mm -Weight: 219 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a Hitchi Seiki HC400 machining center -Manufacturer: Nachi-Fujikoshi -Valve type: SL-G01-E3X-GR-Ci-11 -Valve type: SL-G01-C5-GR-C1-11 -Voltage: 110 V -Pressure: max. bar -Price: for all 6 pieces of valves -Dimensions: 158/45/H84 mm -Weight: 1.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 40 mm -Piston rod: Ø 40 mm -Pipe outer diameter: 55 mm -Stroke: 500 mm -Total length retracted: mm -Hole diameter: 30 mm -Piston rod mount: Ø 44 mm ball head -Ideal for building a hydraulic press -Quantity: 50x available -Price: per piece -Weight: 12.5 kg/piece

Roller conveyor, roller track, powered roller conveyor, roller track -stable design -electrically: powered -Drive motor: 0.37 kW 76 rpm -Roller width: 820 mm -Conveyor length: 1140 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Dimensions: 1150/1140/H960 mm -Weight: 219 kg

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -Design: stable -Drive: electric -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 2150 mm, adjustable -driven: via timing belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Rotary drive for air flaps, rotary air flap drive -Type: GCB136.1E -3-point, 5 Nm, 2 auxiliary switches -Maintenance-free, reversible synchronous motor -overload-proof through magnetic hysteresis coupling -robust and light plastic housing on steel base plate -Hand adjustment and position indicator -Built-in, freely adjustable pair of auxiliary switches Technical specifications: -Run time: 150 s at 50 Hz with a 90 degree angle of rotation -Nominal rotation angle: 90 degrees -Max. Rotation angle: 95 degrees -Operating voltage: 24 VAC -Power consumption: 2 VA -Auxiliary switch setting range 0...90 degrees -Housing protection class: IP 40 -Weight 0.8 kg

DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and equipment -Installation height: 168 mm -Load: 15-24 kN -Quantity: 2 pieces -Price/Sale: complete -Dimensions per piece: 448/240/H168 mm Total weight: 70 kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and systems -Construction height: 168 mm -Load: 10-16 KN -Number: 2 pieces -Price: complete -Dimensions piece: 340/340/H168 mm -Weight complete: 50 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 94 mm -Length: 220 mm -Height: 15 mm -Number: 4x milling support available -Price: complete -Weight: 4.7 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: has a prism and scribing lines -1x Front side: with T-slot -Width: 1495 mm -Length: 3000 mm -Height: 302 mm -Sheet thickness: 80 mm -Plate: is equipped with supporting ribs -Number: 2x plates available -Price: per piece -Transport dimensions: 3170/1580/H302 mm -Weight: 2100 kg/piece

pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR -pneumatic piston pump manufacturer Bollhoff -Type: DB-55.150 -Material volume: max. 7.5 l/min -Max. Pressure: 330 bar -Material temperature: max. 90 °C -Dimensions pump: 1100/900/H1250 mm -Weight: 132 kg -with: drip tray and membrane pump -Manufacturer Graco Type: Husky 307 -Dimensions: 1140/1300/H1500 mm -Weight: 146 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Gedi, crane chassis with chain drive -Carrier width: adjustable from 90 to max. 260/300 mm -Load capacity: 1500 kg -Chain length 2.5 m / 2.6 m -Number: 2x drives available -Price: per piece -Dimensions: 360/200/290 mm / 380/200/195 mm -Own weight: 16 kg / 15.7 kg

Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 -Total length: 620 mm -Pin holder: Ø 16 mm -Pen spacing: 96 mm Price: for all 5 pieces -Weight: 56 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 28 kW -Rotation speed: - -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 900/480/H390 mm -Weight: 240 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.18 kW 71 rpm -Drive motor conveyor belt: 0.18 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1550 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Number: 1x roller conveyors available -Price: per piece -Dimensions: 1550/1650/H950 mm -Weight: 420 kg

Roller conveyor, roller track, powered roller conveyor, roller track -stable design -movable -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 850 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1100 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Price: per piece -Dimensions: 1140/1150/H1110 mm -Weight: 230 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Electric motor, three-phase motor with 2 speeds -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 3/4 kW -Speed: 1420/2830 rpm -Shaft: Ø 30 mm -Wavelength: 75/185 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 545/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor with 2 speeds -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Power: 3/4 kW -Speed: 1420/2830 rpm -Shaft: Ø 30 mm -Wavelength: 75/145 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 545/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Number: 2x available -Price: per piece -Dimensions: 540/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Transfer in current condition as seen -The foot is broken in one place -Electric motor: with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 27 m/min -Drive: 0.6 kW -Belt width: 450 mm -Belt length: 2040 mm -Roller conveyor: powered -Roll width: 550 mm -Transport length: 960 mm -Rollers: Ø 31 mm -Roll distance: 40 mm -Height: 850 mm adjustable and tiltable -Transport dimensions: 3160/620/H850 mm -Weight: 354 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100/120 mm -Length: 230/330 mm -Height: 65/78 mm -Number: 6x milling support available -Price: complete -Weight: 58 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 60 mm -Length: 160/200/300/400 mm -Height: 40 mm -Number: 14x milling support available -Price: complete -Weight: 58 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm -Weight: 150 kg/piece

Plastic shoes, chain drive protector, plastic protector, chain drive rubber, chain rubber, chain protector, rubber drive, rubber pads -Schoner: from working platforms from GSL (German Standard Lift) -universal: applicable -Quantity: 318x savers available -Minimum order: 4 pieces -Price: per piece -Dimensions: 315/59/H36 mm -Weight: 1.2 kg/piece