393 offers

Category: 1300: other machines and plants
New in: 2013
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Copper Ingot Casting Line(30ton Furnace) 1.Copper scrap press Make:Naega(Korera) Manufacturing year:2013 2. SCRAP PRESS Make:Namdong(Korera) Manufacturing year:2013 Size: W400 x H400 x FREE 3, 30ton rotation type furnace Make:Sialtec(Korera) Manufacturing year:2013 1) 30ton rotation type furnace ? MOTOR UNIT brake motor: 7HPx4Px1/30 coupling cyclo reduction gear: 1/43 7HP ? Drive SHAFT & UNIT shaft(head. tail): 100? roller: ? 300x160 bearing & hounsing powerlock ? CASING & COVER ? Sliding Door 2)Bricks Mg-Cr 12% ~ 20% : 2.577pcs 3) Burner (Fuel:Gas) ? OXYGEN LINE Electronic  ...

Category: 1300: other machines and plants
New in: 2010
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

10ton Induction Melting Furnace x 2 sets 10ton Induction Melting Furnace:2sets Make: ENF(Korean) Manufacturing year:2010 1)Power Supply x 2Set's Make:Hwayoung(Korean) Manufacturing year:2010 Type : IFM6-2 - Input : 1,400V/1,866A/60HZ - Output : 8,000KW/2,610V/250HZ Scr Control Type 2)Furnace x 2Set's Cap' : 10Ton Tilting Type 3)Oil Filled Transformer 13,200V/1,400V/4,500K x 4ea 4)Furnace VCB Pannel(3?1,400V) x 4ea 5)Pump & Motor x 4ea 6)Emergency generator Cap' : 115KW 7)Laddle Pre Heater & Hanger 8)Laddle Cap' : 8Ton x 1ea 15Ton x 1ea 18Ton x 1ea 35Ton x 2ea 9)Cooling Sys' Model :  ...

Category: 1300: other machines and plants
New in: 2014
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

750kW(Dual 1,000kg, 1,500kg) High Frequency Induction Melting Furnace Plant 1.Furnace Box Type :Dual 1,000kg, 1,500kg Make: Hanmi(Korea) Manufacturing year:2014 1)Power Supply(Inverter) -Input Rated KVA: 815KVA Line Voltage: 575V Input current: 820A Phase: 3 Frequency: 60Hz -Ouput Max.power:750Kw Voltage Limit: 3,000V Current Limit: 4,000A Frequency Limit: 700Hz 2)Furnace Box Type Tilting Device 1,000kg × 1set 1,500kg × 1set 3)Hydraulic System 4)Water Cooling System: Fin Cooler 5)Water Pump 6)Control Panel 2. Shot M/C Make:Kookdong(Korean) Manufacturing year:2014 Model: KDH-3 Ha ...

Category: 1300: other machines and plants
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Fin tube production line for Heat Exchanger Tube Product:?15.88~?31.8mm Make:Korean Year:2011 1.Heat treatment furnace Make:Oksan(Korean0 Year:2011 ·Cap':200ton/ch ·Heating Time:14hr/ch Material :steel Furnace Size:7,000×7,700×20,000mm(L) ·Furnace Cap': Inside:7,700× 8,000×22,000mm(L) Loading Cap'(Car Frame):220ton(ch) Driving Cap:350ton/ch ·Furnace Temp': Max':1,000? Operating Temp':Room Temp'~800? ·Burner(LNG or LPG): 11ea×2rows 360,000kal/hr ·Rail:56m ·Turbo Blower 2. Compressor Make:Yujin(Korean) Year:2011 (1)Screw Air Compressor(3set) Cap':12.8CMM Motor:75kW ·Air Receiver Tank(2set) Capa ...

Category: 1300: other machines and plants
New in: 2005
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Automobile parts(Heater/Fin/Condensor/Evaporator) Manufacturing line 2 . Fin manufacturing equipment Make:Dongsung(Korea) Year:2005 Size:4,700(L)x1,100(W)x1,590(H)mm Cap':Condenser 8mm(h)x16mm(L) Evaporator 9mm(h)x72/88mm(L) Heater 6.8(h)mmx420mm(L) Main Eelectric:380V 60Hz Main Motor:3.7kW Feeder: 1ea Fin Guide ASS'Y motor:1.5kW Feed Roller ASS'Y Air Tensioner ASS'Y cylinder:CQ2850 Forming Stand ASS'Y H005HB Packing Stand ASS'Y H005HB Make:Hankook(Korea) 4.BLAST CLEANING EQUIPMENT Make:Korea blast Year:2005 5.Ultrasonic cleaner Make:Greensonic Year:2006 6.dipping machine 7.P ...

Category: 1300: other machines and plants
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Aluminium Melting Furnace (20Ton/ch) 1. Melting Furnace Make:Daeyu(Korea) Year;2011 Open Wall Type Cap : 20Ton/ch 1)Melting Furnace Main Body:4,500W4,500L2,800Hmm 2)Combustion Equipmesnts Burner 1,500,000kcal/Hr Blower 80CMM950mmAq22kw Burner Controller 2.Continuous casting machine Make:Daeyu(Korea) Year;2011 Mold Converyor transfer Type Cap : 6ton/hr Length : 16,000mm 3.Continuous casting machine Make:Daeyu(Korea) Year;2011 Mold Converyor transfer Type Cap : 4ton/hr Length : 12,000mm 4 Oil feeding system Make:Daeyu(Korea) Year;2011 5 Cooling tower Make:Daeyu(Korea) Year;2011 6 Dust coll ...

Category: 1200: machines and plants for process engineering
New in: 2016
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Steel Melting Furnace(35kg,45kg,80kg/h) Make:Hankook(Korea) Year:December/2016 1st METER 1Set Cap. : 35kg/Hr (1.5Ton) Model : YJ-1800SSI Body : Upper 950(W)×1,200(L)×530(H) Heating Element : MOSI2 Max.1800? Botton Plate : STS310S & STS304 (960×1,300 12t) Air Mover Thermocouple : B-Type Body : Lower (244(W)×800(L)×300(H) Double Casing : STS310S, STS304 Wheel & Jack Sport Water Supply Manifold(STS304) Feeder : 640×760×1,230(L) Hopper & Feeding Screw & Rotary Seal : ? 400×900(L) Geard Motor : 0.75kw(1/60 W/Speed Control Box Quench Roller 1,200×1,000×1,750(H) Roller : ? 100×340(L) Mat ' I : STS430 Geard Mot ...

Category: 1300: other machines and plants
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

High Frequency Inductive Melting Casting plant (Inductotherm) 2 .Speed Muller(Machine for Forming Foundry Moulds of Sands) Make:SIMPSON TECHNOLOGIES (U.S.A) Year:2011 Model : 100B-200TYP Hartley Controller : 18MK2/2552 Bond Dosing System : 90MK2-5 Sand Cap' : 2,270Kg/BATCH 91Ton/HR Cycle time:90seconds Outlet: 12seconds Motor : 200HP(150Kw) 3.High frequency induction melting furnace Make:Inductotherm Year:2011 Output: 1,750KW Frequency : 500Hz Melting speed : 3,657Kg/Hr±5% 1) Power Supply :2Set 1,750Kw 500Hz VIP DUAL-TRAk With G/L Detertor, Melt Manager Remote Control Panel 2) Furnace : 3Set 2,500Kg Stee ...

Category: 1200: machines and plants for process engineering
New in: 2015
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Aluminium Melting furnace (200ton/day) Make:Seongwon(Korea) Yer:2015 25ton/Charge Fuel:Bunker-C Capacity:4ton/Hr Outlet temp.:720? Burner: 200×10?kcal/Hr Blower:90?/min Auto Door 1-2 Continuous casting machine Make:Seongwon(Korea) Yer:2015 Ingot Case:200units Material:FCD-25 angle:30? Detaching Hammer: Air type Conveyor:152.4(mm)(pitch) Distributor:10holex?50(mm) Cooling water:50ton/Hr Control Panel 1-3 Continuous casting machine x2sets Make:Seongwon(Korea) Yer:2015 Ingot Case:265units Material:FCD-25 Angle:30? Detaching Hammer:High pressure Air Conveyor:152.4(mm)(pitch) Distributor:10holex?50( ...

Category: 1200: machines and plants for process engineering
New in: 2016
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Pit Type Furnaces for tempering(hardening) of Automobile parts. Pit Furnaces are used for variety of Heat Treatment Processes Commonly used for tempering(hardening) of Automobile parts,Annealing of M.S. wire and Forging heat. 1. Pit Type Furnace x2sets Make:Simdo(Korea) Year:2016 Capacity:3ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:760mm diameter x1600mm 80KW/2PART Control panel 2. Pit Type Furnace Make:Simdo(Korea) Year:2016 Capacity:5ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:1200mm diameter x1800mm 140KW/2PART Control panel 3. Pit Type Furnace x2sets  ...

Category: 109: other metal working machines
New in: 2016
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Pit Type Furnaces for tempering(hardening) of Automobile parts. Pit Furnaces are used for variety of Heat Treatment Processes Commonly used for tempering(hardening) of Automobile parts,Annealing of M.S. wire and Forging heat. 1. Pit Type Furnace x2sets Make:Simdo(Korea) Year:2016 Capacity:3ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:760mm diameter x1600mm 80KW/2PART Control panel 2. Pit Type Furnace Make:Simdo(Korea) Year:2016 Capacity:5ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:1200mm diameter x1800mm 140KW/2PART Control panel 3. Pit Type Furnace x2sets  ...

Category: 107: sheet metal working
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Pipe drawing machine plant (2.3 inch) 2. Pipe annealing and normalizing furnace Make: Samwon(Korea) Year: 2011 Type: Roller hearth.continuous type Capacity: 3.2ton/h Temperature: Max.1000degree Normalizing: Nor 900-950 degree Annealing: 720-900 degree 1) Furnace - Loading conveyor:Roller speed: 620mm/min -Entrance chamber: Roller speed: 620mm/min -Heating chamber:Gas burner type(450,000Kcal/h) /R/T heater power 950Kw -Water cooling chamber: Roller speed:620mm/min -Unloading conveyor: Roller speed:620mm/min 2) DX-Gas generating equipment Radiant tube type Capacity: 45Nm3/h Quantity: 10sets 3)Temperature control panel: AC380V,11 ...

Category: 1300: other machines and plants
New in: 2013
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Copper and Gold Wire drawing machine plant 1.Copper and Gold High Frequency continuous casting machine Make:Jiwoo(Korea) Year:2013 - Melting quantity: Max.10kg/Batch(Copper basis) - HF Induction Power: 30kw - Diameter 7mm Round Bar Vertical type 1. Base Vacuum Chamber Mat'l: Polished & EP Treated Size: 450(OD) x 100(H)mm 2. Process Chamber Size: 140(OD) x t3 x 600(L)mm 3. Casting equipment 4. Rod Withdrawing System 5. Vacuum Pumping Line 6. Vacuum Gauge and Controller 7. HF Induction Power Supply 2. Single head copper and gold wire drawing machine Make:Seonjin(Korea) Year:2013 - Type: Horizontal Single type - Ma ...

Category: 109: other metal working machines
New in: 2011
Price: request quote
Location: Land-DE Germany, 98617 Obermaßfeld- Grimmenthal
Seller: Ingenieurbüro Klein UG Maschinenhandel

Max load: 15000 kg Max temperature: 1150 ° C Usable space: height 2020mm x 2030mm width x length 3280 mm Electrically powered lift gate with Portal Electrically powered stove car with pusher chain Total weight: 17150 kg Space height x 3435 mm width x length 5280 mm 9700 mm Stove car weight: 4600 kg Rail construction can be installed on ground or in the soil Temperature measurements: 5 Thermocouple type S (PtRh-PT) Thyristor control of the heating circuits Voltage: 400V (50 Hz) Performance:: 330 KW We offer like with installation and commissioning.

Category: 109: other metal working machines
New in: new
Price: request quote
Location: Land-DE Germany, 44369 Dortmund
Seller: VEI-Engineering GmbH

High temperature chamber furnace, make VEI max. temperature: 1.200°C useable dimensions (w x h x d): 750 x 500 x 1.100 mm heating power: electrically, 42 kW

Category: 109: other metal working machines
New in: new
Price: request quote
Location: Dortmund
Seller: VEI-Engineering GmbH

Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-rs RS
Seller: Interfaces doo

baking surface 300x65cm the expected baking 350C 6 burners, 3 up, 3 down on gas

Category: 109: other metal working machines
New in: 1992
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Worling temperature: 20-900°C, melting output: 200-250kg/h, heating output: 90kW, inner dimensions: 1000x1200x400mm, capacity: 1t aluminium, dimensions of 2 openings: 600x300/ 100x150mm, heating elements: 9x SIC heating rods, length: 2150mm, width: 2300mm, height: 1900mm, weight: 6t.

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-DE Germany, 92714 Pleystein
Seller: Mirrotech Glas & Spiegel GmbH

Data: -Gas operation -Dimensions of the door: 2 x 1000 Br. x 2900 Hö. mm -External height: 3400 mm -External width: 2800 mm -External length: 5500 mm -Interior height: 3000 mm -Internal width: 2500 mm -Interior length: 4600 mm Special price: â?¬19.000

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand galvanising line Type: Continuous pickling cum non-oxidation furnace Material: Hot rolled low carbon steel (HR) Yield strength: 17 kg/cm² - 30 kg/cm² Silicon content should not exceed 0.007% Strip width: 200 – 600 mm Thickness: 1.0 – 3.2 mm Coil data incoming: weight: 15 tons max. ID: 508 mm OD: 2000 mm Coil data outgoing: weight: 15 tons max. ID: 508 mm OD: 2000 mm Type of coating: Zinc 100 – 400 gm/m² - both sides Line direction: from left to right Line speed: entry & exit: 20 – 80 m/min. process speed: 20 – 60 m/min. Production Capacity: 30 t/h – according to the reference size Thickness: 2.0 mm x 600 mm wide (720 t/day & 260,000 t/a ...

Category: 109: other metal working machines
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

There are two furnaces aEs stehen zwei Öfen zur Verfügung: (1) REINHARDT VL 14/ 4: Anzahl Schubläden: 4, Schubladenfläche: 1400x1000mm, Temperaturbereich: 20-280°C, Heizleistung: 48kW, Steuerung: SÜTRON BT 20, Länge 3400mm, Breite: 3100mm, Höhe: 3000mm, Gewicht: 3,5t, Baujahr: 1998 (2) REINHARDT VL 14/ 5: Anzahl Schubläden: 5, Schubladenfläche: 1400x1000mm, Temperaturbereich: 20-280°C, Heizleistung: 66kW, Steuerung: SÜTRON BT 20, Länge 3400mm, Breite: 3100mm, Höhe: 3000mm, Gewicht: 3,5t, Baujahr: 2001, mit CO2-Löscheinrichtung, available after September 2018.

Category: 702: breadmaking and confectionery machines
New in: 1999
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

4 x VTR thermal oil oven plant with 11 editions All stoves with hood, including lighting digital control of panel dimensions 100x60cm complete plant with boiler

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand extrusion press including billet furnace Mfc.: Ed Buttress – Williamson Eng., Rexroth Built: 1998 Stopped: 2012 Type: Indirect aluminium extrusion press Force: 1000 MT Billet dia.: 6” – 152 mm Length: up to 510 mm Profiles up to diameter of 95 mm Remote hydraulic power pack: 200 kVA Main hydraulic pump supplied by Rexroth supplied in 2012. Working pressure: 5000 psi Suitable for production, development pilot line, research facilities of different metal etc. Billet furnace gas heated 2 Zones every 2 minutes a billet ready for press Capacity: approx. 25 billets/hour Note: Electric is already removed – has to be replaced! Full service can be provid ...

Category: 702: breadmaking and confectionery machines
New in: 2011
Price: request quote
Location: Land-DE Germany, 75210 Keltern
Seller: Pick Bäckereimaschinenhandel

It is a used WP store oven type B611i (year 2011) for sale. For 5 x trays 60 x 40cm. The furnace is in top condition and immediately available. Price on request.

Category: 702: breadmaking and confectionery machines
New in: 2004
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

Rollin jumbo 2 piece rack for sheet metal 58x78cm Oven is a gas burner with Miwe Mucs control Year of construction: 2004 Furnace stands in the whole Verladefertig Available from mid August 2018 Free shipping on request Trade-in and delivery on request

Category: 702: breadmaking and confectionery machines
New in: 1998
Price: request quote
Location: 51107 Köln
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

WP MD 101 C 52 deck baking oven Baker State 5 back floors 160 cm deep for 2 honing apparatus of depth of 160 cm Gas burner Technical data: Manufacturer: Werner & Pfleiderer Type: MD 101 C-52 Year of construction: 1998 Gas burner 79kW EL. 400 volts 50 Hz Dimensions outside: Width: 185 cm Depth: 270 cm Height: 230 cm Dimensions Backeteage: Width: approx 123 cm Depth: 165 cm Floor height from top to bottom: 2 x 20 cm; 1 x 22 cm; 2 x 16 cm The furnace stands in our Cologne warehouse. Tour is possible by arrangement.

Category: 702: breadmaking and confectionery machines
New in: 2002
Price: request quote
Location: Land-DE Germany, 51107 Köln
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

WP MD 80 C-42 Matador floor furnace oil stainless steel used 4 baking levels of them below 1 pull-out stove, clearance height: 153 mm 2-Kari (it can 2 different temperatures be set) with steam extraction hood Oil burner Technical data: Manufacturer: Werner & Pfleiderer GmbH Type: MD 80 C-42 Matador Year of construction: 2002 Oil 64 KW Operating voltage: 3 x 400 V 50 Hz Dimensions: Width: 175 cm Depth: 280 cm Height: 232 cm Height with cover: 252 cm Weight: approx. 3200 kg Dimensions back floor: Width: 120 cm Depth: 160 cm The furnace still stands in the bakery and must be applied by an approximately 90 cm wide door. Location: Close to Cologne He must  ...

Category: 1300: other machines and plants
New in: 2012
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping sta ...

Category: 1300: other machines and plants
New in: 2014
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° o ...

Category: 109: other metal working machines
New in: 2012
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Plant includes: (1) Immersion Basin with Lifting Table for material (2) Drying Station with Convection Air Furnace NOLZEN LDTe 70/65/66: Length: 850mm, width: 1100mm, height: 2000mm (3) Cooling Station: Length: 700mm, width: 850mm, height: 2000mm, with Water Cooler MTA TAEevo M03 (4) Immersion Basin with Lifting Table for material (5) Drying Station with Convection Air Furnace NOLZEN LDTe 70/65/66: Length: 850mm, width: 1100mm, height: 2000mm (6) Tempering Station with Convection Air Furnace NOLZEN LDTe 70/65/550: Length: 2050mm, width: 4000mm, height: 2000mm (7) Cooling to room temperature: Length: 1500mm, width: 850mm, height: 2000mm, including Conveyor System HELM.

Category: 702: breadmaking and confectionery machines
New in: 2013
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

Wiesheu bakery-suit deck oven with proofing Cabinet type: B4-E2 / EEO 64s / EEO 64-M consisting of 2 floor furnaces, a convection oven and Proofer Convection oven: with exhaust hood Digital scroll control (IS control) Convection oven is for 5 trays 60 x 40 cm year 2011 / 01 Control Panel right Right-hinged door Multi-deck ovens: digital scroll control (IS control) fit into a floor 2 trays 60 x 40 cm in a row or even a sheet 60 x 80 Control Panel right provers: 10 sheets of 40 x 60 cm panel right

Category: 102: lathes
New in: 2000
Price: request quote
Location: Land-pl PL
Seller: GORBREX Machinery Trade Sp.z o.o.

Manufactured: TOS-HULIN Model: SKA 12 YOM: 2000 CNC SIEMENS 840 C Technical details: Diameter of the plate: 1250 mm Maximum machining diameter: 1400 mm The maximum height of the piece: 1400 mm The maximum height of the optional part: 1900 mm The maximum height of the maq furnaces. Palletizing: 1150 mm Minimum of boring diameter: 320 mm Range of speeds: No. 2 Maximum weight of the piece: 8000 Kg Max weight of the maq furnaces. palletized: 5000 Kg Skip feed: 12000 mm/min Work progress: 0/12000 mm/min Turning the threads: 0.01/99.99 mm/rev Travel of the car from the center Right/left:-750/1920 mm The height of the crossbar, 700 mm, each: 100 mm Cutting force: 44000 N V ...

Category: 702: breadmaking and confectionery machines
New in: 2010
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

2 ovens stacked stainless steel clad digital control both ovens 5 editions of 60 x 40 cm proofing Cabinet has 16 supports 40 x 60 cm mobile on castors technical data: furnace: 400V 3/N/PE / 50 Hz / year 2010 Proofer: 230V 1/N/PE / 50 Hz / year 2010

Category: 109: other metal working machines
New in: 1969
Price: 2.400 €
Location: D - Thüringen
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Interior width x height: Interior depth: temperature: up to 1,100 ° c. Timer: Connection: 42 kW Accessories: Condition: good Weight: Dimensions:

Category: 109: other metal working machines
New in: 1969
Price: 2.200 €
Location: D - Thüringen
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Interior diameter: 610 mm Interior depth: 880 mm Temperature: up to 500 ° C Port: 21 kW Accessories: Condition: good Weight: approx. 2.5 t Degree furnace: 1.400 x 1,300 x 1,200 mm Ground cover: 1,800 x 1,300 x 2,200 mm

Category: 106: presses
New in: 2008
Price: request quote
Location: Land-cz Czech Republic, 60200 Brno
Seller: AMARON s.r.o.

Max. workpiece diameter: 1250 mm Max. distance between mounting surfaces of lower and upper die: 900 mm Max. stroke of upper approx.: 600 Hardening capacity of machine per hour approx.: 1200 kg/h Workpiece height: 250 mm Clamping force: Centering pin: 80 KN Clamping ring: 210 KN Dimensions of the machine without accessories: 4250x3250x3700 mm Machine weight without accessories: 14.000 kg Accessories: Electric oven with controlled atmosphere: REALISTIC CAE 13.15.8 / 10 Workspace: 1300x1400x800 mm Working temperature: 950 ° C Power input: 78 KW Dimensions of furnace: 3080x2840x2050 mm Furnace weight: 8600 kg Ventilator Flame curtain Oxygen probe ECOSOND ...

Category: 1300: other machines and plants
New in: 1986
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand aluminium extrusion press with billet furnace Mfc.: CLECIM Force: 2200 MT Built: 1986 Dismantled in 7/2017 Billet size: 9” – 229 mm Press size: approx. 2200 mm x 7700 mm Press weight: approx. 100 ton (body) + 50 ton (hydraulic unit) + 20 ton (Billet heater) 30 ton(etc.) = apprpx. 200 ton Hydraulic Pressure: Max. 500 bar (500kg/cm2) Nominal hydraulic pressure: 300 bar (300kg/cm2) Billet furnace Mfc.: TBA Built: 1986

Category: 702: breadmaking and confectionery machines
New in: new
Price: request quote
Location: Land-de Germany, 40237 Düsseldorf
Seller: Middle East Trading

Width 800 mm Two-head confectionery automatic machine DN-800T is designed to produce cake products of various types. The machine is adapted for works on a constant basis with a tunnel furnace. The use of two heads makes it possible to produce cakes of two different types of dough at the same time, including two-colour cakes, cases with stuffing, ornamented cakes. Principle of use: The dough from two dispensers is dosed on the moving belt of the movable table; however one can dispense white dough and the other one coloured dough or marmalade. Depending on a tip type and machine settings it is possible to produce cakes with stuffing or ornamented ones and the turn of tips makes it possible to  ...

Category: 209: other wood working machines
New in: new
Price: request quote
Location: Land-DE Germany, 82281 Egenhofen
Seller: Graf Maschinenhandel GmbH

; new

Category: 1300: other machines and plants
New in: 2004
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand Aluminium Log Furnace Mfc.: Sistem Teknik Type: ABHF-2500-805-0316 Built: 2004 Log dimensions: dia. 178 x 12600 mm length Capacity: 2.5 t/h Max. temperature: 550 °C Installed power: 1.171.000 kCal/h + 30 kW Hot shear Mfc.: Assimakis S.A. Type: 2LEVFLY Max. force: 215 MT Scope of supply: Log feeding system Recuperator Log furnace Log hot shear

Category: 109: other metal working machines
New in: 2000
Price: 17.500 €
Location: D - Hessen
Seller: Bernd Gail GmbH

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Category: 109: other metal working machines
New in: 1975
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Inner dimensions: 900x700x110mm, connected load: 42kW.

Category: 1300: other machines and plants
New in: 2011
Price: 300.000 €
Location: Herzogenrath
Seller: Saint-Gobain Sekurit Deutschland GmbH

The continuous furnace by Koyo has 7 Heizonen, related to the temperature, all individually set. (via the control panel) That is, curves temperature can be used with the oven. For example: In every 20 ° C 180 ° c to 40 ° C and vice versa. After the heat, the item goes through the transition zone from the zone to the cooling zone, where the element at room temperature down is cooled. Through the chain belt, it is possible to heat the element from above and below. A thermocouple is installed in each heating zone. The chains treadmill traverses a ultrasound pool, as well as a drying station during the process so that it is cleaned continuously. Bb8bg9i03o (See detail drawing)  ...

Category: 1300: other machines and plants
New in: 1973
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand rebar production plant Mfc.: Danieli, Pomini, Farrel, Allen Bradley Built: 1973 Refurbished in 2015 Stopped in 3/2018 Entry billet dim.: 120, 130 & 140 mm square Length: 8.0 m Rebar dimensions: dia. 8 – 32 mm Length: 6 – 14 m Capacity: 1200 – 1400 ton on 3 shifts Consist of: Re-heating furnace Roughing mill Flying shear Intermediate mill Finishing mill Finished Monobloc Shears Winding lines Water treatment unit Fire protection system High value in spare parts

Category: 109: other metal working machines
New in: 2011
Price: request quote
Location: Land-de Germany, 97318 Kitzingen
Seller: SENER MASCHINEN

Vacuum event oven S7

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de Germany, 57080 Siegen
Seller: MPS Frank Müller

Induction melting furnace induction furnace Manufacturer: IHS Taylor grub, a furnace 1500 kg, 720 kW, 1000 Hz Contact person Mr. Mueller see also our over 200 more deals at. (Subject to alterations reserved in the technical data, data and prices, as well as sale!)

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de Germany, 57080 Siegen
Seller: MPS Frank Müller

Induction melting plant Manufacturer Inducal, complete system, a furnace of 500 kg, 500 kW, 1000 Hz Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 109: other metal working machines
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Connected load: 27.3kW, max. working temperature: 1150°C.

Category: 109: other metal working machines
New in: 1988
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Inner dimensions: 200x190x450mm, max. working temperature: 750°C, length: 820mm, width: 520mm, height: 1050mm, weight: 155kg.

Category: 1300: other machines and plants
New in: 2003
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)