fur cutting used for sale

Oven is completely renovated in 2016.

Oven is compleatly renovated in 2016.

Oven is compleately renovated in 2016 year.

Casing-in machine Make CMC Model Q-Case / Gemat Year 2011 Max size 500 x 420 mm (roll width 420 mm) Min size 100 x 120 mm Thickness 2 - 80 mm Available direct

Joint forming + pressing Make CMC Model Q-Case - Crator Year 2010 Max size 500 x 420 mm Min size 100 x 120 mm Thickness 6 - 80 mm Pressure up to 5.000 kg by hydraulics Available direct

Turning-in machine Make CMC Model Pyxis 110 Year 2011 Width 1100 mm Details Pneumatic, foot pedal, no electricity Available direct

curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

Description: Operating voltage: 220 V Frequency: 50 Hz Rated current: 8 A Power: 1800 W Internal dimensions: 250 x 170 x 100 mm Approx. Onsite Dimension. (l x w x h): 650 x 500 x 650 mm, weight approx.: 80 kg

Description: Seriennummer: BGAB06-03-A50058 Internal dimensions: 200 x 120 x 200 mm Approx. Onsite Dimension. (l x w x h): 660 x 450 x 600 mm, weight approx.: 150 kg

Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H

Description: Temperature range up to 200° C Inlay trays 500 x 550 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,100 mm, weight approx.: 250 kg

Hardening furnace Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely adjustable - Temperature display - Drive 400 V / 8 kW - Interior dimensions approx. W 260 x H 160 x D 500 mm - Usable space 0.02 m³ - Space requirement approx. W 700 x H 1400 x D 900 mm - Weight approx. 140 kg

Key data: 700 °C, 2400 mm, 6500 mm

For sale is: 1 piece gas-fired chamber furnace with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 Year: 2017 for unsupervised operation for three-phase three-phase 400Volt For temperatures up to max. 700 degrees C. for natural gas "H", liquefied petroleum gas Number of burners: 8 Total burner power: 720kW For more technical data, see the attached PDF. The furnace itself was only in operation for 4 years and during this time it made about 100 annealings, each lasting 23 hours.

Vötsch EFU 60/60 Industrial Furnace 13.3 kW  Specifications Manufacturer: Vötsch Type: EFU 60/60 Temperature: 650 °C (max. oven temperature) Volume: 0.2 m³ (furnace chamber) Dimensions: (Outside length 1800, Width 1300, Height 2200mm) Dimensions: (inside width 600, depth 600, height 600mm) Power: 13.3 kW (electrical connection) More items - new and used - can be found in our shop! International shipping costs on request!

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

Exhibition furniture, div., here dismantled, 3 base cabinets, 1 tall cabinet, worktop anthracite, skirting board, etc.

Description: Composed of: N°1 cabinet measuring 850 x 430 x 550 mm, with contents. N°3  ,chairs of dimensions 450 x 450 x 900 mm. Approx. Onsite Dimension. (l x w x h): 1,800 x 600 x 900 mm, weight approx.: 60 kg

Description: Composed of: N°2 wooden office furniture of size: 700 x 450 x 950 A computer, monitor, keyboard and miscellaneous contents. Approx. Onsite Dimension. (l x w x h): 1,400 x 450 x 950 mm, weight approx.: 120 kg

Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg

Description: Lot consisting of three different pieces of furniture including: N°1 chest of drawers with three drawers, two shelves and other storage compartments, dimensions 400 x 550 x 600 mm N°1 traditional chest of drawers with six drawers, dimensions 500 x 670 x 650 mm N°1 cabinet with one wide shelf, dimensions ,850 x 420 x 600 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 500 x 700 mm, weight approx.: 50 kg

Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg

Description: Composed of: N°3 office cabinets with contents. Approx. Onsite Dimension. (l x w x h): 1,900 x 500 x 700 mm, weight approx.: 60 kg

Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg

Description: Lot consisting of: . N°2  ,cabinets with two doors, dimensions: 850 x 450 x 1000 mm each. , Containing various diaries, file cabinets, cordless phone chargers and miscellaneous. Paper documentation not included. Approx. Onsite Dimension. (l x w x h): 1,700 x 450 x 1,000 mm, weight approx.: 10 kg

Description: Without content. Approx. Onsite Dimension. (l x w x h): 900 x 450 x 1,400 mm, weight approx.: 30 kg

Description: Composed of: N°1 metal shelving unit with dimensions 900x450x900 mm N°3 boxes containing miscellaneous wiring, Ethernet cables, electronic components, a dock for a cordless phone and miscellaneous. Approx. Onsite Dimension. (l x w x h): 900 x 450 x 900 mm, weight approx.: 30 kg

Bathroom furniture set KESPER 6 pieces 8 sets, 8x tall cabinet 30x103x31.5 cm, 9x wall cabinet approx. 29x70x14 cm, 9x tall cabinet 30x78x31.5 cm, 9x tall cabinet 30x71x20 cm, 9x mirror cabinet 65x69x21 cm, 9x vanity unit 2-door

Bathroom furniture set KESPER 5 pieces 8 sets, high cabinet approx. 33x83x31t cm, wall cabinet approx. 32x70x22t cm, vanity unit approx. 65x54x32t cm, tall cabinet approx. 33x195x30t cm, mirror cabinet approx. 65x70x21t cm

Bathroom furniture set KESPER 3-piece 25 sets, 28x base cabinet each approx. 80x82x33.5t cm, 26x Waschitsch each approx. 85x51t cm, approx. 25x mirrors each approx. 80x98h cm

Bathroom furniture set KESPER 3-piece 34 sets, base cabinet approx. 40x51.5x30.5t cm, mirror cabinet approx. 40x75.5h cm, tall cabinet approx. 50x180x30.5t cm

Bathroom furniture set KESPER 5-piece 6 sets, cabinet with drawer approx. 35x82.5x35t cm, cabinet approx. 34.5x66.15.5t cm, mirror cabinet approx. 64.5x66x16t cm, base cabinet approx. 64.5x59x35t cm, tall cabinet approx. 34.5x194.5x35.5t cm

Bathroom furniture set KESPER 5-piece 8 sets, tall cabinet approx. 33x195x30t cm, mirror cabinet approx. 65x70x20t cm, base cabinet approx. 65x54x31.5t cm, tall cabinet approx. 30x80x34t cm, wall cabinet approx. 32.5x70x21.5t cm

Bathroom furniture set KESPER 5-piece 34 sets, 36x mirror cabinet each approx. 50x75.5.x20t cm, 34x cabinet with drawer each approx. 25x77x31t cm, 35x cabinet each approx. 25x76x20t cm, 34x base cabinet each approx. 50x52x31t cm, 34x tall cabinet each 25x181x31t cm

Bathroom furniture set KESPER 5-piece 42 sets, 44x tall cabinet each approx. 32x196x30t cm, 42x base cabinet each approx. 65x55x31.5t cm, 43x cabinet with drawer each approx. 32.5x77x32t cm, 42x mirror cabinet each approx. 65x70x21t cm, 55x cabinet each 32x70x20.5t cm

COMPANY DISSOLUTION OFFICE FURNITURE Chairs Office Desks Container Shelving and much more to sell in a bundle

with temperature controller (EFCO, 008)

Machine number : 33830162

Description: Including placement crane Approx. Onsite Dimension. (l x w x h): 1,600 x 1,300 x 3,400 mm, weight approx.: 700 kg

Description: Composed of 1 glass table, 6 chairs, 1 desk, 1 chest of drawers, 1 cabinet,1 sofa Approx. Onsite Dimension. (l x w x h): 2,400 x 4,000 x 2,000 mm, weight approx.: 600 kg

used electric continuous oven CTX DZ33I, overhauled, for preparing pizza, baguette, sandwich, etc., with infrared heating system, temperature range 90 to 480 degrees Celsius, housing and conveyor belt made of stainless steel, 8.4 kW, belt width 457 mm, baking area 573 x 793 mm

Description: . Approx. Onsite Dimension. (l x w x h): 610 x 380 x 340 mm, weight approx.: 20 kg

Description: Programat CS Oven Data Sheet Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 30 kg

Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucks Approx. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg

Description: Maximum temperature 900° Technical documentation and instruction manual not available.  , weight approx.: 725 kg, Approx. Onsite Dimension. (l x w x h): 1,050 x 1,100 x 1,800 mm

Description: various sizes, more details: see photos Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,400 mm, weight approx.: 450 kg

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible.

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...