fur cutting used for sale

with B200/25 and Number: 6852884, Shrink Wrap / Foil Sealing

2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute

(series 5310) 2 Side Rotary creasing and slotting Machine, Max: 1300mm, Min: 135x80mm, 100m./minute Year: ca. 1961

Water-cooled high-frequency induction continuous furnace for inductive local heating, activation of getters, hardening & starting and much more

Shrink Wrap/Foil Sealing

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

Key data: 260 mm, 1250 , 1250

We constantly have new and used convection chamber furnaces on offer. Give us a call! Convection chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and drive-in channels and exhaust fan Demo unit, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs each 20 segments freely programmable -NtLog for controller recording the data via USB stick -Temp. uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air flow rate 125m³/h -Auxiliary: Controlled cooling (exhaust fan) Entry rails Bushing 40 mm -Connected load 27 KW -Weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We ar ...

Key data: 450 mm

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

Key data: 850 mm

We always have convection chamber furnaces on offer. Give us a call! it 12 months warranty, from 2023, original packaging, in stock -500 liters -Max temperature: 850°C -with controller P570 ( 50 programs with 40 segments each ) - Process documentation on the customer's USB stick -Furnace chamber: W x D x H 750 x 1000 x 750 mm -Temp. uniformity +/- 5 °C according to DIN 17052-1 in the empty furnace room -Max 125 kg charging weight opt. Tray (not included) -Connected load approx. 28 KW -not suitable for solvent-based substances - Documentation, CE declaration Auxiliary: Controlled cooling (exhaust fan) Viewing in our warehouse by appointment. We stock new and used industrial furnaces. Get in touch with us!

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

High temperature furnace, make GERO type: ULO 40/10- 2G heating: electrical useable space: ø400 x 600 mm temperature: max. 1.000°C room conditions: ventilation / exhaustion voltage: 400V connected load: 25 kVA control: MODCON with Modvis 2000

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h

El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Pizza open Middleby Marshall

Technical data Max. temperature: 500 °C

DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h

Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air

Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

total power requirement:0,2 kW weight of the machine ca.:30 kg dimensions of the machine ca.:0,4 x 0,3 x 0,3 m

v.v. dosing module

There are three identical furnaces available, max. operating temperature: 1100°C, inner dimensions: 100x140x100mm, Fassungsvermögen: 2l, connected load: 1.5kW, length: 320mm, width: 350mm, height: 410mm, weight: 20kg.

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Ingot dimensions: 830x830x250mm, max. load: 400kg, max. operating temperature: 1570°C.

Max. operating temperature: 1100°C, nominal power: 53kW, weight: 1.2t.

Max. operating temperature: 300°C, nominal power: 8.55kW, connected load: 9.1kVA, weight: 500kg.

There are two identical Chamber Furnaces GFO available, operating temperature: 50-250°C, heating output: 7.8kW, usable space dimensions: 1000x580x760mm, length: 1000mm, width: 1500mm, height: 1900mm, without control cabinet.

Max. operating temperature: 700°C, connected load: 24kW.

Inner dimensions: 440x540x700mm, max. operating temperature: 1050°C, connected load: 21kW, weight: 490kg, including spare parts, accessories and documentation, available in August 2023.

Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor.

Max. operating temperature: 1000°C, with Jumo IMAGO 500 temperature control and gas control (currently forming gas 95/5).

Max. operating temperature: 950°C, connected load: 179kW, weight: 4.2t.

Max. operating temperature: 300°C, heating output: 75kW, weight: 850kg.

Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible.

Folder Gluer (folding carton gluer)

The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.

Usable chamber dimensions: 3800x1800x300mm, max. operating temperature: 1000°C, max. annealing temperature: 980°C, max. workpiece weight: 800kg, fuel: natural gas, connected load: 600kWh, with documentation, on-site inspection is possible.

Folder Gluer (folding carton gluer)

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

Two identical chamber furnaces are available. T. max.: 1280°C, internal dimensions: 350 x 350 x 250mm, volume: 30l. External dimensions: 1040 x 1030 x 1340mm, weight: 210kg. Heating capacity: 15kW, electrical connection: 3-phase.

An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.

Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm

Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible.

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Make CMC Model Q-Joint Year 1995? Working width 500 mm Thickness up to 80 mm Details Foot pedal operated

Make Duplo Model Ultra 205A Year 2010's Min size 210 x 297 mm Max size 521 x 710 mm Substrates 120 - 350 grams Speed 10-40 meters per minute (roughly up to 4,500 A3 sheets per hour) Feeder SF-205 Automatic suction feeder Details batch counter, cleaning function, air knife, touch screen controls, set up by the computer