129,243 used machines on RESALE, but how to find them? Machine Search
12.700 litre, Stock number: T3975, Litre: 12.700, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 4 pc., Item: Tank, Standing: 5 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, 500 x 380 mm., Inner diameter: Ø 2350 mm., Total height: 3800 mm., Manufacturer: Furhoffs Rostfria
El. heated chamber furnace, make Heraeus Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm
Key data: 250 °C
El. heated. chamber furnace, make Heraeus Type: BT 5042 Temperature: 250°C Internal dimensions (W x D x H): 390 x 285 x 350 mm
Key data: 250 °C
El. heated chamber furnace, make Heraeus Type: T 340 Temperature: 250°C Internal dimensions (W x D x H): 300 x 280 x 270 mm
Key data: 600 °C
Vertical furnace, make Borel Possible processes: tempering, nitriding Dimensions: diameter 800 mm height 1.800 mm max. Temperature 600ᵒC Connected load 50 kW Without lid and electrical cabinet.
Key data: 450 °C
El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm
Case hardening line CIEFFE Max. Charge dimensions (W x L x H): 580 x1000 x 550 mm Max. Charge weight: 450 kg gross consisting of: 2 Gas heated multipurpose chamber furnaces - Type: LLF-5-G / LLF-5-G A/R - Working temperature: 750° - 980°C - Quenching media: Nitrogen – Oil - Atmosphere: Methanol, Methane, Nitrogen 6 ÷ 8 m3 / h 2 Gas heated tempering furnaces - Type: FVF 5 - Working temperature: 80° - 750°C - Atmosphere: Air, Nitrogen + Methane 1 Washing machine Reys - Type: Master - Washing tank: 2000 lt - Rinsing tank: 950 lt - Washing pump: 7,5 kW – 700 lt/min - Rinsing pump: 4 kW – 700 lt/min 1 Uniloader Charging places Charging material (baskets and grids) Spare parts
A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.
used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end
A slightly used Uterna furnace is available. Documentation available. An on-site inspection is possible.
Electric convection oven, make KellerIhne Max. temperature: 420°C Internal dimensions (W x D x H): 400 x 500 x 400 mm Connected value: 4,5 kW
Laboratory Furnace for Bending Test 120 kW Kiln 900 °C Chamber Furnace 2 bending chambers Ceiling height adjustment Temperature range: max. approx. 900 C Additional heating Control cabinet PC, Fabr. HP, Intel Core 2 Duo Voltage: 400 volts Power: 120 kW Year of Make: 2015 Antechamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm More items - new and used - can be found in our shop! International shipping costs on request!
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
Vivid Matrix MX-370P laminator with Omniflow Specifications: • Machine is already dismantled and stored • Laminating machine with manual system • Easy set-up • Fast and safe film roll change • Swing-out, patented control panel with monochrome display, control via buttons • Simple, self-explanatory symbolism • Easy feeding of the sheets with defined attachment point and automatic Scaling • Adjustable speed, temperature and roller pressure • "Anti-Curl Technology" – laminated arches that lie perfectly flat every time •Auto. Sheet separation after lamination • Compact design • Ideal for business cards, book covers, flyers, brochures, invitation cards and much more • Faster Foiling KIT for faster sleeking – up to 5 m/min. • Ultra-quiet compressor for pneumatic pressing • Console on castors for easy change of location • IVIVID Matrix ...
Wire stapling machine with 2 stapling heads for 0-25mm stapling
Extruder + electric cabinet output: 200 kg Heads not included Winder not included
Several transport trolleys for furniture are sold. Dimensions approx L190cm W110cm H180cm Price is net Loading facilities available Article location Wilhermsdorf
Offer 25335 Specifications: - Nominal temperature / continuous temperature infinitely variable up to 1280 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 19 - Drive 400 V / 5.5 kW - Interior dimensions approx. W 250 x H 140 x D 350 mm - Usable volume 11 L - Base frame W 900 x H 900 x D 950 mm - Space requirement approx. W 800 x H 600 x D 750 mm - Weight approx. 80 kg
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
Morgana Autocreaser 33 year: paperweights: 70-400 grams Vacuum autofeed with alignment 16 creases per sheet 9 programs max size: 730 x 330 mm min size: 160x140 mm
Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg
Three units with tools for shaping / bending diemaking Kris PCM and Sandvik including metal table to mount/hammer onto
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
Minipack RAS FM76 shrinkwrapper With automatic transport after the sealing has been completed on a movable frame size: 500x380x200 mm
Haug AG35 generator charging unit for making products static or antistatic See soecificationa in the pictures
Cyklop DTM 22 electric tape dispencer - on a trolley - two tape length can be pre-set - cuts and wets the tape automatically - Including +/- 50 reels of 70mm wide tape
temperature max.: ° internal length of the oven: mm internal width of the oven: mm internal height of the oven: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens Programmer with Touch Screen, Simatic S7 Automatic Setting, OptiControl, Cutting Board inline , 4 4 Opening Heads, Thread Separating, Max Size: 320x420mm, Min Size: 75 x 150 mm, PlusPlus-Stacker with Roll Conveyor Delivery, Manuals and Tools
CHARACTERISTICS HEAT TREATMENT EQUIPMENT temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mmInlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm (annealing furnace and cooling section)N2 purge gas volume 420 m3Furnace design: Roller hearth continuous furnaceMaterial: TubesOuter diameter: 14 - 180 mmWall thickness: 0.8 – 8.0 mmLength: 4.0 – 13.0 mSurface before annealing: --Throughput at 920 °C annealing material temperatureThroughput at 700 °C annealing material temperatureReference pipes: 25 x 2.5 x 8000 mm33 x 3.5 x 8000 mm40 x 3.5 x 8000 mm55 x 2.8 x 8000 mm63 x 4 x 8000 mm75 x 6 x 8000 mm110 x 8 ...
Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.
Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible.
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm
Shaft oven Borel Type: 5-62 Light dimensions (ø x H): 330 x 750 mm Heating power: 18 kW at 3 x 380 V AC, N, PE Max. temperature: 1100 °C Without control cabinet.
Chamber oven Borel Type: 11-73 Light dimensions (W x D x H) chamber above: 240 x 410 x 90 mm chamber below: 200 x 320 x 60 mm Heating power: 15 kW at 3 x 380 V AC, N, PE Max. temperature: 1400 °C Without control cabinet.
Rattan furniture: table with 2 different chairs
Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.
The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...
Key data: 300 °C
Technical data: Manufacturer: Vötsch Type: NTL 60/60 Year of Make: 1999 Usable space:0.2 m³ Nominal power: 7.2 kW Nominal temperature: 300 °C Steam room: 0.39 m³ Minimum exhaust air volume flow: 0.2 m³ Condition Condition: Used Functional: tested and fully functional
Old furniture, dining table approx. 100x100 cm, 3 chairs, drying rack
Office furniture KÖNIG+NEURATH light grey, plus various other furniture, angle desk approx. 180x120 cm, sideboard, mobile pedestal etc.
Key data: 850 °C
Thermconcept KU 270/08/A with additional blower (can be easily dismantled) Connection/test on site possible Pickup required Convection chamber furnaces KU 270/08/A Max. temperature: 850°C Inner dimensions (mm): W 600 x D 750 x H 600 External dimensions (mm): W 1150 x D 1710 x H 1770 Weight: 770 kg Volume: 270 l Power: 20.0 kW Voltage: 400 3/N V
Old furniture, filing cabinet wall, 3 desks, side table, everything older
Hanging cabinet HS 1000 with sliding door Used device cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH with intermediate floor
curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW
Large mixed lot of retail shelving and shopfitting elements removed from store interior. Includes wall shelving units, gondola shelves, perforated panels, textile display elements, corner elements, cabinets, counters, support columns, drawer units, metal brackets, shelf consoles, hooks, acrylic/PET holders, LED lighting elements, mirrors, slatwall panels, back panels, storage cabinets, and various mounting accessories. Quantities include numerous shelving elements (L600–L1250 variants), side panels, perforated display panels, drawer modules, base cabinets, display tables, and approximately 150+ wooden bases plus large quantity of metal shelf brackets and hooks. Also includes electrical/LED lighting components and PVC shelf profiles. Auction-ID: A7-40551-10
A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
3 € 
