fuji electric used for sale

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 260/150/H205 mm -Weight: 9 kg

Load capacity 25,000 kg Lifting speed 0.8/3.2m/min Lifting height 4 m Strand count 2 Chain 23.5 x 66 mm Operation via hand remote control - conversion to radio possible Engine group 1Bm / m3 Electrical values 400 V / 3.1 / 12.5 KW Weight without carrier frame 780 kg Documentation available - good condition - little used - PRICE ON REQUEST!

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Transfer in current condition as seen -The foot is broken in one place -Electric motor: with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

Slip ring motor, slip ring rotor, three-phase motor, electric motor -Power: 30 kW -Speed: 720 rpm -Conical shaft: 70 to 59 mm -Length: 122 mm -Design: B3 -Protection rating: - -Dimensions: 1120/580/H530 mm -Weight: 558 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Cooking Unit: Stainless Steel Berner with Induction Stove 269x70x70 cm for Pedestal Mounting Cooking block with left 2 sliding doors and 3 drawers each 30x50x10 cm, sliding door cabinet 121x60x36 cm, in the middle induction stove 4 plates, hob size 65×56 cm, with pot detection, 400 V, 14 kW, 20 A, direct connection, storage compartment at the bottom 71x70x33 cm additionally 2 sockets with 230 V, right 3 drawers each 30x50x10 cm, high-quality gastro fitting, for base mounting, feet optionally available, also freely available in the room, Original price approx. 18000,00 €

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm -Weight: 20kg

Three-phase motor, electric motor -Motor is for a Ehemann grinder -Electric motor: with 2 shaft outputs -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 600/335/H270 mm -Weight: 48 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP44 -Number: 1x available -Price: per piece -Dimensions: 520/300/H245 mm -Weight: 48 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 520/330/H275 mm -Weight: 47 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 490/260/H310 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Quantity: 1x electric motor available -Price: per piece -Dimensions: 450/250/H310 mm -Weight: 57 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 440/265/H360 mm -Weight: 61 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 3x available -Dimensions: 430/260/H310 mm -Weight: 56.2 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP54 -Dimensions: 390/300/H245 mm -Weight: 43 kg

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 725 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 550/410/H305 mm -Weight: 97 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 550/360/H370 mm -Weight: 121 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 450/265/H410 mm -Weight: 79 kg

Three-phase motor with 2 speeds, electric motor -Power: 3/5.2 kW -Speed: 720/1450 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 510/370/H300 mm -Weight: 92 kg

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

Electric motor, three-phase motor with 2 speeds -Power: 2.1/7 kW -Speed: 930/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 450/260/H330 mm -Weight: 48 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 44 -Number: 2 electric motors available -Price: per piece -Dimensions: 450/340/H260 mm -Weight: 47 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 2900 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 460/320/H285 -Weight: 55 kg

Electric motor, three-phase motor with 2 speeds -Power: 2/6 kW -Speed: 965/1455 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 480/320/H260 mm -Weight: 69 kg

three-phase motor, electric motor -Power: 7.5 kW -Speed: 1400 rpm -Shaft: Ø 22 mm -Design: B5 -Protection class: IP 44 -Recess: Ø 250 mm -Dimensions: 475/370/H350 mm -Weight: 70 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 3x available -Dimensions: 460/320/H260 mm -Weight: 58 kg

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Three-phase motor with 2 speeds, electric motor -Power: 4/16 kW -Speed: 740/1470 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 650/450/H365 mm -Weight: 167 kg

Three-phase motor with 2 speeds, electric motor -Power: 7/20.5 kW -Speed: 975/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 54 -Dimensions: 690/430/H360 mm -Weight: 186 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 710 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 490/340/H260 mm -Weight: 63 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/310/H270 mm -Weight: 70 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 650/440/H350 mm -Weight: 142 kg