fuji electric used for sale

Three-phase motor, electric motor -Power: 37 kW -Speed: 1480 rpm -Shaft: Ø 42 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 820/550/H450 mm -Weight: 330 kg

Electric motor, three-phase motor -Power: 17 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 630/460/H420 mm -Weight: 160 kg

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

COMPAL POWER VG-R50 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 50 kW-62, 5kVA Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 1100 kg Auction-ID: A7-44803-21

Power generators with heat extraction Engine type: MAN D2840LE21 Power: 450 kVA Year: 1996 Hours: 13765 Cooling: Water Speed: 1500 1/min Generator: Marelli MJB 315 Mb34 Voltage: 400/231 V, 50 Hz General overhaul October 2023 by a specialist company, then no longer used. Subject to prior sale - errors possible! Internal reference number: E-1004-101

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-44803-148

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Bicycle pump type: -with tank and control valve -Drive: 24 V -Dimensions: 285/280/H750 mm -Weight: 38 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2955 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 770/540/H510 mm -Weight: 300 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg -Lifting speed: m/min -Lifting height: 3.8 m -with: operation -Dimensions: 580/330/H490 mm -Weight: 100 kg

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-92

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg

30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102

Three-phase motor, electric motor -Power: 1.85 kW -Speed: 2845 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 300/240/H205 mm -Weight: 20 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 315/260/H200 mm -Weight: 24.6 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Number: 1x available -Price: per piece -Dimensions: 280/245/H200 mm -Weight: 22 kg

Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.

Electric pallet truck, equipped with lithium battery and quick charger, 24 volt batteries, with electric traction and lifting. Never used 0 hours, in its original packaging Overall dimensions: 1400 x 800 x 800 mm Weight: 250 kg Auction-ID: A7-44803-48

Three-phase motor, electric motor -Power: 13 kW -Speed: 2930 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 570/410/H370 mm -Weight: 122 kg

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: EX -Number: 3x available -Price: per piece -Dimensions: 470/360/H300 mm -Weight: 75 kg

electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B5 -Protection rating: - -Dimensions: 480/300/H360 mm -Weight: 70 kg

Three-phase motor, electric motor, agitator, stirring device -Motor: for agitator -Power: 5 kW -Speed: 960 rpm -Hollow shaft: Ø 68 mm -Flange: Ø 360 mm -Protection class: EX -Dimensions: 420/360/H385 mm -Weight: 113 kg

Electric motor, three-phase motor -Power: 11 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 590/354/H405 mm -Weight: 76 kg

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg

Electric motor, three-phase motor -Motors: are unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 3x engines available -Price: per piece -Dimensions: 450/340/H300 -Weight: 50 kg

Container Power Generators Engine: MAN Type: D2842 LE21 Year: 1995 Operating hours: approx. 3500 Generator: Leroy Somer LSA 47.1 L11 Last maintenance: January 2025, in use until August 2025. Incl.: Technical Documentation Subject to prior sale - errors possible Internal reference number: E-1004-103

Automatic electric strapping machine, mod v2 with 14.4 volt battery, never used Overall dimensions: 300 x 200 x 200 mm Weight: 5 kg Auction-ID: A7-44803-423

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/355/H280 mm -Weight: 78 kg

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: - -Dimensions: 420/350/H290 mm -Weight: 72 kg

Three-phase motor, electric motor -Power: 37 kW -Speed: 2945 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 710/450/H430 mm -Weight: 185 kg

For sale I offer a Yale® CPV 10-4 electric chain hoist. The electric chain hoist is a new demonstration device with slight bearing marks, which can be seen in the pictures. The electric chain hoist is sold with a new UVV test and papers. Data: - Load capacity: 1,000 kg - Design: Carrying hook - Lifting height: 3 m - Lifting speed: 4 m/min - Lifting motor power: 0.75 kW - Chain thickness: 5 mm - Chain pitch: 15.5 mm - Number of load trains: 2 - Control type: contactor control

DH Robotics RGI-100-14 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.1 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, < 85% RH

DH Robotics RGI-100-30 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.2 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, 85% RH

S. No.: 511.1012.471 Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

TRANSFORMER FRANCE TRANSFO 6500 kVA For sale: 6,500 kVA STEP-UP TRANSFORMER – FRANCE TRANSFO (Schneider Group) Available immediately – Pick-up EXW France ✅ Key features Brand: France Transfo – Schneider Group Type: Step-Up Transformer Power: 6,500 kVA Year: 1999 Standard: NFC 52-100 Coupling: Yd11 Supply voltage / secondary voltage: Several positions displayed: pos 1 : 16,267 V pos 2: 15,890 V pos 3: 15,483 V (Exact range visible on plate) Frequency: 50 Hz Short Circuit Voltage: 8.17% HV insulation: 95/38 kV LV insulation: 60/2 kV Current rating: 895.7 A Windings: Copper Cooling: ONAN (oil) Dielectric: Oil

Power generator machine set, stock as good as new, unused Machine set (engine/generator/radiator) on base frame Engine: Perkins Type: 4012-46 TAG2A LTP power: 1650 kVA PRP power: 1500 kVA Cooling: Water Speed: 1500 1/min Generator: Leroy Somer LSA 50.2 L8 Voltage: 400/231 V, 50 Hz Operating hours: None! Warranty: 6 months from delivery Subject to prior sale - errors possible! Internal reference number: E-1004-104

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 250/230/H160 mm -Weight: 11 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B3 -Protection class: EX -Dimensions: 390/210/H340 mm -Weight: 49 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg

Soundproofed generator with Volvo diesel engine. The system was intended as an emergency power generator, but was never used, only for test purposes. PRP power: 658 kVA LTP power: 723 kVA Year: 2023 Hours: 3 Cooling: Water with radiator cooler Speed: 1500 1/min Generator: MeccAlte ECO40-2L Voltage: 400/231 V Frequency: 50 Hz Tank capacity: approx. 650 litres Control cabinet: Pramac ACO3 controller for manual and automatic operation. Subject to prior sale - errors possible! Internal reference number: E-1004-106

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 9 mm -Construction: B34 -Protection class: IP 44 -Dimensions: 185/112/H145 mm -Weight: 3.5 kg

NATURAL GAS Generators, soundproofed. Complete system with gas control system Maintained and checked by manufacturer HSE. Power: 160 kW Year: 2023 Hours: 1745 Cooling: Water with radiator Generator: Stamford UCI274H Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 1/min Subject to prior sale - errors possible! Internal reference number: E-1004-107

Electric pallet truck, equipped with lithium battery, and fast charger, 24 volt batteries, with electric traction and lifting. Never used 0 hours, in its original packaging Overall dimensions: 1400 x 800 x 800 mm Weight: 250 kg Auction-ID: A7-44803-385

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Dimensions: 445/252/H320 mm -Weight: 50 kg

Electric motor, three-phase motor -Replacement motor: for pressure blower -Power: 3.0 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: - -Dimensions: 390/320/H320 mm -Weight: 24 kg

Electric Cylinder Metric Cylinder ETB50M05PA57FMA200A Original price: 3500,- € Item Condition: New / Traces of Storage The goods come from a company liquidation from the automotive industry and were temporarily stored in paternosters. Storage traces possible. R10B1_EK You can find more cylinders - new and used - in our shop! International shipping costs on request!

Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 590/380/H380 mm -Weight: 116 kg

Three-phase motor, electric motor -Power: 7 kW -Speed: 1900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 410/275/H330 mm -Weight: 40 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/250/H280 mm -Weight: 37 kg