fuji electric used for sale

Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

Electric motor, three-phase motor -Motors: are unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 3x engines available -Price: per piece -Dimensions: 450/340/H300 -Weight: 50 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/355/H280 mm -Weight: 78 kg

Electric walker trucks, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EJE 116Masch. No: 90281103 year of construction 2007Nominal load capacity: 1600 kgLifting height: 200 mmFork length: 1150 mmOperating voltage: 24 VoltTotal length: 1750 mmTotal width: 730 mmHeight with drawbar: 1300 mm- Battery from year of construction 2013, type 24V 2PzS 250 (24 Volt, 250 AH)- Battery automatic charger- 5575 operating hours read. Weight approx. 560 kggood condition; used

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: - -Dimensions: 420/350/H290 mm -Weight: 72 kg

Three-phase motor, electric motor -Power: 37 kW -Speed: 2945 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 710/450/H430 mm -Weight: 185 kg

Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 250/230/H160 mm -Weight: 11 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B3 -Protection class: EX -Dimensions: 390/210/H340 mm -Weight: 49 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 9 mm -Construction: B34 -Protection class: IP 44 -Dimensions: 185/112/H145 mm -Weight: 3.5 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Dimensions: 445/252/H320 mm -Weight: 50 kg

Electric motor, three-phase motor -Replacement motor: for pressure blower -Power: 3.0 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: - -Dimensions: 390/320/H320 mm -Weight: 24 kg

Electric walking forklifts, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EME 112Masch. No: 90145339 year of construction 2005Nominal load capacity: 1200 kgLifting height: 200 mmFork length: 1170 mmOperating voltage: 24 voltsTotal length: 1550 mmTotal width: 700 mmHeight with drawbar: 1300 mm- 2 pieces traction batteries NEW from year of construction 2024, type 12 volts, Ah 55- integrated automatic charger, type E 230 G 24/6 (24 volts, 6 amps)Weight: approx. 175 kggood condition; used

Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 590/380/H380 mm -Weight: 116 kg

Three-phase motor, electric motor -Power: 7 kW -Speed: 1900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 410/275/H330 mm -Weight: 40 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/250/H280 mm -Weight: 37 kg

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 28 kW -Rotation speed: - -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 900/480/H390 mm -Weight: 240 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Brake: 250 V -Dimensions: 450/300/H250 mm -Weight: 53 kg

Electric motor, three-phase motor, brake motor -Power: 1.8 kW -Speed: 1430 rpm -Shaft: Ø 24 mm -Hole circle: Ø 165 mm -Rezess: Ø 130 mm -Construction: B5 -Brake -Price: per piece -Number: 2x available -Dimensions: 430/200/H260 mm -Weight: 30 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.48/1.6 kW -Speed: 720/2880 rpm -Shaft: Ø 16 mm -Construction: B5 -Protection class: IP 44 -pole changing -Dimensions: 440/200/H260 mm -Weight: 36 kg

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse

Three-phase motor with 2 speeds, electric motor -Power: 1.3/1.8 kW -Speed: 700/1440 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -pole-reversible -Price: per piece -Quantity: 1 available -Dimensions: 500/300/H250 mm -Weight: 54 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg

Three-phase motor, electric motor -Power: 21 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: internal cooler -Dimensions: 640/560/H460 mm -Weight: 172 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.55 - 33 kW -Speed: 30 - 2000 rpm -Shaft: Ø 45 mm -Construction: B3 -Protection class: IP 22 -External fan: 0.37 kW 2750 rpm 0.1 m³/sec -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1420 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Dimensions: 470/390/H330 mm -Weight: 69 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 22 mm x 60 mm -Design: B5 -Protection class: - -Flange diameter: 254 mm -Recess diameter: 180 mm -Dimensions: 380/305/H250 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 580/350/H395 mm -Weight: 95 kg

30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102

Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 600/360/H370 mm -Weight: 116 kg

Electric motor, three-phase motor -Motor: unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Number: 27x motors available -Price: per piece -Dimensions: 450/340/H299 mm -Weight: 44 kg

Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Manufacturer motor Siemens type: OR8 9-2 -Manufacturer gearbox Siemens type: K460-2b -Motor power: 0.2 kW -Speed range: 90 rpm -Motor: adjustable -Construction: B5 -Drive shaft: Ø 20 mm -Price: per piece -Number: 4x available -Dimensions: 435/350/H300 mm -Weight: 33 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -1x design: B3/B5 -1x design: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 480/285/H335 mm -Weight: 69 kg

Electric motor, three-phase motor with 2 speeds -Power: 2.2/1.5 kW -Speed: 720/1430 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 455/430/H370 mm -Weight: 80 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 2840 rpm -Shaft: Ø 30 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 560/250/H215 mm -Weight: 55 kg

Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 2905 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 580/420/H350 mm -Weight: 110 kg

S. No.: 511.1012.471 Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

TRANSFORMER FRANCE TRANSFO 6500 kVA For sale: 6,500 kVA STEP-UP TRANSFORMER – FRANCE TRANSFO (Schneider Group) Available immediately – Pick-up EXW France ✅ Key features Brand: France Transfo – Schneider Group Type: Step-Up Transformer Power: 6,500 kVA Year: 1999 Standard: NFC 52-100 Coupling: Yd11 Supply voltage / secondary voltage: Several positions displayed: pos 1 : 16,267 V pos 2: 15,890 V pos 3: 15,483 V (Exact range visible on plate) Frequency: 50 Hz Short Circuit Voltage: 8.17% HV insulation: 95/38 kV LV insulation: 60/2 kV Current rating: 895.7 A Windings: Copper Cooling: ONAN (oil) Dielectric: Oil

Power generator machine set, stock as good as new, unused Machine set (engine/generator/radiator) on base frame Engine: Perkins Type: 4012-46 TAG2A LTP power: 1650 kVA PRP power: 1500 kVA Cooling: Water Speed: 1500 1/min Generator: Leroy Somer LSA 50.2 L8 Voltage: 400/231 V, 50 Hz Operating hours: None! Subject to prior sale - errors possible! Internal reference number: E-1004-104