ft used for sale

Rotary actuator FTW, PRODUCTION TECHNOLOGY Weißenfels DR400 AV Rotation angle: 360° turntable: Ø 420 mm Fastening flange: 530 x 505 mm Drive ring: Ø 128 / 108 mm Guide bolt: Ø 65 mm Flange for drive: Ø 80 / 130 mm, Bolt circle diameter: Ø 165 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 530 x 515 x 450 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump LOWARA, FTI DB22P-B-2-04 Pressure: max. 6,2 bar ( 90 psi ) impeller: Ø 178 mm ( 7.0 ( inches ) ) connections: G2 ( inches ) motor: PLM112RB14S1/340 4.0 KW 2900 rpm 400 / 690 V 3AC IP55 pump material: Plastic used, tested ! Dimensions: 635 x 295 x 345 mm

Submersible pump, coolant pump BRINKMANN FT35/360 Immersion depth: 360 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q = 40 l/min H = 2 m Engine: 0,,21 kW 220/380 V Dimensions: 515 x 160 x 130 mm New !

In-line pump, vertical centrifugal pump GRUNDFOS CRNE1-7 E-CX-GI-E-HQQE A96843944P10826 Q: 1.8 m3/h H: 33.6 m H max: 43,6 mbr /br /H max: 43,43,7 25 bar 120 °C engine: MGE90SA2-FT100-D 0.75 kW 2873 rpm 380 - 480 V 3AC 50 / 60 Hz New ! Dimension: 270 x 260 x 610 mm

In-line pump, vertical centrifugal pump GRUNDFOS CRNE5-10 E-CX-GI-E-HQQE A96843945P10826 Q: 5.8 m3/h H: 51.8 m H max: 69,8 mbr /br /H max: 69,69,8 m3/hbr /br /H: 51.8 mbr /br /H max: 69,69,H 7 m 25 bar 120 °C engine: MGE90SB2-FT115-D1 1,5 kW 2896 rpm 380 - 480 V 3AC 50 / 60 Hz New Dimension: 270 x 260 x 770 mm

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 0300 switching point: 275 mm 10 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 280 mm max. immersion depth with adapter: 190 mm used, tested ! Dimensions: 420 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 0800 switching point: 775 mm 10 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 780 mm max. immersion depth with adapter: 690 mm used, tested ! Dimensions: 920 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant II FTL361-DGR2AA2K - 1000 switching point: 975 mm 1410 0 - 55 V DC with adapter for adjusting the immersion depth max. immersion depth without adapter: 980 mm max. immersion depth with adapter: 890 mm used, tested ! Dimensions: 1120 x 120 x 100 mm

Level level switch, level sensor Endress + Hauser Liquiphant T FTL20-0020 switching point: 13 mm 10 - 35 V DC max. immersion depth: 38 mm used, tested ! Dimensions: 155 x 50 x 35 mm

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Level level switch, level sensor Endress + Hauser Liquiphant M FTL51 - AGR2DB1G5A 943491-9000 max. immersion depth: 100 mm Thread: G1 19 - 253 V AC New, with documents ! Dimensions (sensor): 240 x 120 x 100 mm Dimensions ( packaging ): 250 x 140 x 120 mm

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4750+800 Nominal / outside width in mm: 885 Belt width in mm: 750 Driven: ...

Level level switch, level sensor Endress + Hauser Liquiphant M FTL51 - AGW2DB2G4A 943491-9000 max. immersion depth: 100 mm Thread: G1 10 - 55 V DC New, with documents ! Dimensions (sensor): 240 x 120 x 100 mm Dimensions ( packaging ): 250 x 140 x 120 mm

Viewing windows, machine windows, replacement frames RITTAL FT2730 Field of view: 550 x 325 mm External dimensions: 600 x 380 x 35 mm without mounting material ! New ! Dimensions ( packaging ): 640 x 400 x 50 mm

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

M. No.: 27830/85 Paper size range(cm) : max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Station: TS36/4J Feeder: FT36J Folding unit: KB36

Used line for bottling and packaging carbonated drinks in 500ml glass bottles. Bottle capacity on 500 ml 22000 L/h Line composition: 1. Demag hoist, year of production 2009, model EUDC Pro 2-250 2. Simonazzi crate depalletizer, model ROBOT DEPAL, year of production 1994 3. Simonazzi bottle unloader, model DECAMATIC, manufactured in 1994 4. KHS bottle washer, model Omega Kaskana 23/87ES01, year of production 1994 5. Simonazzi crate washer, model LAVACCASSE M-2000, year of production 1994 6. Simonazzi fillinf machine, model EUROSTAR RAA-425, year of production 1994 7. Pama tunnel pasteurizer, model PAMA 484 DR, year of production 1994 8. Krones labeling machine, model PRONTOMATIC 720-21-8-8-110RM, year of production 1994 9. Simonazzi crate packing machine, model INCAMATIC IAB 443, year of production 1994 10. Simonazzi crate palletizer, model KOMBI PAL IBP 254, year of production ...

Tofflon bottling line manufactured in 2022 includes: 1. Sterilization depyrogenation tunnel, model FT0120 2. Vial washing machine, model FW02040 3. Filling and capping machine, model FF0604 4. Vial Sealer Model FC0230 5. Open restricted access barrier oRABS 6. Lyophilizer LYO-10 (CIP, SIP) -RBR All machines included in the line are joined through the appropriate conveyors or storage tables. Aseptic conditions are provided by an open barrier of limited access oRABS. The performance of all machines of the line is synchronized and is according to different bottle formats: 1. R2, R6 filling speed 100 bottles per minute 2. R20 filling speed 70 bottles per minute 3. R50 filling speed 35 bottles per minute Lyophilizer, model LYO-10 (CIP, SIP) –RBR Vial size 2R-50R Total usable shelf area: 9.77 m2 Number of shelves: 9+1 (upper reflective shelf) Capacity: 1.2R-44200 2.6R  ...

Positioner Assembly, Fuser Assembly PAGUS Positioning pneumatic approx. 100 mm BOSCH 0 821 405 131 ( 0821405131 ) stroke electric approx. 140 mm < br /> STAR 1460-205-00 SIEMENS 1 FT5046-1AF71-3AB0 345 V Stainless steel carrier plate ! used, tested ! Dimensions: 710 x 460 x 186 mm

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Three-phase electric motor VEM KMR 63 G 6 FTN ( KMR63G6FTN ) 0,25 kW 900 rpm 220 / 380 V 3AC 50 Hz IP44 design: B5 shaft diameter: Ø 14 mm wavelength: 30 mm Groove width: 5 mm flange diameter: Ø 110 / 136 x 136 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 205 x 140 x 170 mm

Forklift OM Model: DI 60 C Year of manufacture: 2005 CE Nominal load capacity 6000 kg Diesel Load centre 600 mm Motor 74 kW Cabin model New Cab Italia 9709 FTP next safety check 5/24 Overall width 2030 mm Dead weight 8.66 tons.

Key data: 480 mm, 3000 mm, 860 1/min

Stock number: 3878 CNC LATHE Manufacturer: FUKUNO SEIKI, Type: FL 770 x 3000 N Machine NO.: 300312, Year of manufacture: 2014 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 770 mm Dia. Turning length 3000 mm Main motor power 15 kw Main spindle speed range 25-860 rpm Spindle bore 155 mm dia. Control Fagor Fabr. Spindle operating hours 1620 hours Accessories: Chuck Main Spindle FTC-460 mm dia Tool holder 4 pc. aut. elder Chip conveying. Cooling water system. Tailstock Lunette Length: 5500 mm, Height: 2220 mm, Width: 2240 mm, Weight: 6900 kg

Description: Pallet: 3,000 kg load / 1 degree indexing Spindle thru coolant Samchully HRS-650LF22 CNC rotary table Samchully FTC-810 chuck Chip conveyor Includes shipping to any major seaport in the world. z-motion: 1,400 mm, x-motion: 2,100 mm, y-motion: 1,350 mm, control: Fanuc 31iA, pallet table size: 1,000 x 1,000 mm, numbers of pallets: 2, toolchanger positions: 60, turning speed range: 8,000 rpm, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 5,095 × 8,775 x 3,989 mm

Delta Instruments LactoScope milk and liquid dairy product analyzer, model: FTA-3.1, serial number: F3827701, year of construction: 2009, 230 V, 50 Hz, 450 VA, dimensions: 880 mm x 550 mm x 500 mm. Including Fujitsu monitor and keyboard. Including case with parts.

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

Reconditioned Caterpillar C15 long-block engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 6NZ 9NZ A3A B5R BEM BXS C2A EGH ENG FFH FFJ FFL FSE FTE FTH FTJ H5G HAZ JAS JDK JDN JDY JEP JJF JKG JRE KEM KRA L4L L4X LDN LHX M5F MBN MCW MG2 MXS N5F NXS P1K P1Z P3Z P4Z RKS RLA SDP SWE TRB TXG TXL TXY Z2C; Gross weight [kg]: 1400; Engine: CATERPILLAR C15