ft used for sale

bore capacity in steel (diameter): 12 mm throat: 220 mm bore stroke: 60 mm thread capacity: 6 M column diameter: 70 mm bore spindle turning speed range: 120-6000 U/min table-size: 300x250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lagun FTV4-SP turret milling machine. Table: 1372x280mm. Longitudinal travel: 800mm. Cross travel: 345mm. Vertical travel: 400mm. Ram travel: 570mm. Variable speeds head. ISO40. Spindle travel: 127mm. Automatic tool holder. Slotting head. DRO Fagor for 3 axis. Weight: 1450Kgs.

wire diameter 0,5-2 mm spring diameter 20 mm flange length 80x120 mm working width 90 mm output - pieces/min 70

Manufacturer Tacchi Model FTC56 Year 1989 capacity 7000 x 1600 mm

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Hoppmann Type: FT302RLACM; year: 2000. Centrifugal dispenser

Capacitive limit switch for bulk solids ( 5 pcs)

Capsuling machine ROBINO&GALANDRINO – Monostadio FT6 Year: 2010. Speed: 7.000 bph. Direction: Counterclockwise. 6 heads for pvc capsules. Long-autonomy capsules distribution. Safety protections.

Vertical turret milling machine Manufacturer: LAGUN Model: FTV 5-SP Year of manufacture: 2008 Few working hours, machine in condition like new

Frömag electromechanical lifting table broaching machine Type FTR9-0-1000-PPC Year of construction 2015 IBN 01/2016 Stroke length 1000mm Drive power 30kW Tractive force 90kN Clearing speed 0 – 10 m/min Return speed 0 – 20m/min Chip conveyor with magnetic tape Machine is in a used very good condition

We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

HITECSA DXCZ/FTBZ 501 Tropic (2x) Brand:HITECSA Type:DXCZ/FTBZ 501 Tropic (2x) Stock number:M23-7112 Cooling capacity:30.0 kW Application:Cooling Number of fans:2 + 2 Refrigerant:R407C Refrigerant Content:4 + 4 kg Voltage:400 Volts Power consumption:5 + 5 kW Dimensions:950 x 374 x 1143 mm Year:2018 New/unused Number in stock:8 piece(s) Price:Quotation request Description: New unused A.C. units in Tropic (+55°C) version, ideal for extra warm ambient temperatures. This A.C. installation consists of 2 indoor and 2 outdoor units. They cannot be sold separately, because the control is only in the Master unit. The total capacity varies from 21kW to 30kW, depending on the outside temperature. Visit also our website: used-refrigeration

This Feeler FTC 350 LMC Lathe was manufactured in the year 2020 in Taiwan. It is equipped with a Fanuc Series Oi-TF control unit.

This ALESA MONTI FT45TG Milling machine was manufactured in the year 1998 in Italy. It is equipped with a HEIDENHAIN TNC 430 Control unit. The milling head fixe have 2 types of spindle (horizontal and vertical).

Code: 0260 Brand: OMMA Model: FTF 1400/2M - CE Standard Automatic 4 rollers glue spreader for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, doors etc. - CE Standard Technical data: Rigid and solid frame Working width mm 1360 Max working thickness mm 80 Working table height mm 905 Diameter of rubber coating rollers mm 250 Diameter of dosing rollers chromium plated mm 185 Installed power Kw 1,1 Dosing rollers chromium plated. These rollers can be easily cooled with cooling device "CRIO" Electronic variable working speed with display Analogic dial of the distance between the spreading rollers with 1/10 mm reading precision High uniformity of the spreading on full working width Motorised rotating disc ejector Stainless steel collecting tank of the cleaning water Cooling device "CRIO" to maintain the original glue characteristics in term ...

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description ROTARY TABLE DIAMETER 1500mm MAXIMUM MOLD DIMENSION 400X400mm

Description MAXIMUM MOLD DIMENSION 400X400mm MINIMUM ACTUAL MOLD THICKNESS 320mm MAXIMUM ACTUAL MOLD THICKNESS 479mm 2 WARM ROOMS 2 PNEUMATIC JACKS

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories.

The driverless vehicle was used for transporting two bigbags, max. product weight: 2x 1.1t, max. product dimensions: 1200x1200x1950mm, max. driving speed: 40m/min, controls: SIEMENS SPS, weight: 3.6t, operational hours counter: 20h.

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Single-phase isolation transformer, isolating transformer, solid rubber distributor -Manufacturer: Foster, transformer isolation transformer -Type: 1FT22 82 -Primary: 220V 50Hz -Secondary: 42 V see photo nameplate -Power: 1kVA -Number: 3x transformer available -Price per piece -Dimension.: 350/220/H210 mm -Weight: 17 kg/pc.

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Siemens servo motor type 1 FT5062-OAF01-2-Z with encoder Heidenhain -Speed: 3000 rpm -Voltage: 150V -Shaft: Ø 19 x 40 mm -Encoder: Heidenhain ROD 456 - 500 -Number: 2 engines available -Price per piece -Dimensions: 345/116/H165 mm -Weight: 7.3 kg/pc.

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Manufacturer motor: Siemens, type 1 FT5072-OAFO1-2 / brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm // 3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275 / H230 mm -Weight: 29 kg

Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

SEW Eurodrive electric motor Fully functional

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1 mm distance between columns: 1000 mm weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,16 x 0,93 x 0,73 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 320 mm z-travel: 250+80 mm mm total power requirement: kW weight of the machine ca.: 3700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Capsuler Robino Galandrino MONOSTADIO FT6 For PVC capsules Robino Galandrino [...for more information send your inquiry to the seller.] refno: CA38

General SKU279U510 LocationBarneveld MakeEscher Wyss TypeFTK 135/450 No.2710214 Year of construction1980 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,7 m Weight2000kg Floorspace3,8x1,03 mFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor with brake -Type: 1FT5072-1AF71-4AHO -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui = 367 V -Shaft: Ø 24 x 50 mm -Brake: 24V - 21.3W -Dimensions: 325/144/H175 mm -Weight: 15 kg

Banding film BandAll FTN5048150; Width 48mm; Thickness 50 mic; 150 linear meters/roll; 33 cartons of 6 rolls. Banding foil BandAll FTN5048150; width 48mm; thikness 50 mic.; length 150m/roll; 33 cartons each 6 rolls.

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor type 1 FT5064-1AF71-4AG0 -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui= 375 V -Shaft: Ø 19 x 40 mm -Protection class: IP64 -Quantity: 2 engines available -Price per piece -Dimensions: 325/115/H170 mm -Weight: 10 kg/pc.

Inv. Num. : 7288 Type: FTC 1000 Producer: Heller Generated:- Parameters: In good technical condition.

x-travel: 3700 mm y-travel: 840 mm z-travel: 850 mm Tool bore: SK 40 tool magazin:: 50 fach Control: Siemens Sinumerik 840D coolant: 1 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 8 x 3,5 x 3,5 m CNC Machining Center - Vertical Manufacturer: CINCINNATI Type: FTV 840/3700 Year of construction: 2006 Serial No.: 7080-S00-KD0211 CNC control SIEMENS Sinumerik 840D SK40 tool holder tool changer T-slot clamping table approx. 3700x840 mm chip conveyor coolant treatment Accesories: approx. 180 tool holders SK40 (some with tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Nominal load capacity: 1100 kg Towing device: Type: KF20Z Trailer area: approx. 2500 x 1250 Important note: an empty trailer will be delivered, without contents Approx. Onsite Dimension. (l x w x h): 3,900 x 1,900 x 950 mm, weight approx.: 300 kg

turning diameter:180 mm swing diameter:340 mm total power requirement:65 kW weight of the machine ca.:120 t dimensions of the machine ca.:4,2 x 1,6 x 3,0 m max. workpiece weight:20 kg max. X-axis travel:450 mm max. Z-axis travel:300 mm chucking diameter:210 mm spindle distance:750 mm spindle bore:52 mm worktool system:10-fach VDI40 worktool system:8-fach Capto C5 (optional) 2-spindle

Size: 2500 mm Technical details: Max. size: 250 cm Net Weight: 70 kg Measurements: 280 L 33 W 120 H Equipments: with Fixing Bar and Stand 98 in Cutting Width, 30mm FOAM and 3mm FOREX Max. Cutting Thickness

Te Coop: Endress & Hauser Nivotester FTC 481 Z

Canon IR C2380i Multifunction Device (Copy-Print-Scanning-Faxes) Dimensions (W x D x H) 56.5 x 75.5 x 79.1 cm Weight approx. 116 kg Type: Colour multifunction system, on mobile cabinet Function: Color Copier Network Printer Scanner Fax Duplex Condition: used, only maintained by Canon specialist service partner Format: up to A3 Paper feed: 2x paper trays + single feeder Technical data: > Maximum original size DIN A3 copy sizes > Cassette 2x drawer caspers A5SR to A3, A3+ (305 x 457 mm) > Stacking system DIN A5R to DIN SRA3 (320 x 450 mm), envelopes, 99 x 140 mm to 320 x 457 mm > Resolution: Scanning 600 x 600 dpi Copy 600 x 600 dpi Print 1,200 x 1,200 dpi (text/line, half speed, optional) Color depth 256 grayscales > Copy/print speed DIN A4 B/W: 23 ppm Colour: 23 ppm DIN A3 B/W: 15.5 ppm Colour: 15.5 ppm/min. > Zoom mode 25% to 400 ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...