ft 8 used for sale

Used Diesel Generator Cummins NTA 855. Technical data: 278 HP 50 HZ 400/220 volts Weight: approx. 1500 kg

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

Description •Resolution 12,000 dpi •Density Dmax 4.2 •Data depth 48 bit RGB, 32 bit CMYK •Document types Supervision / Viewing • Light source xenon 75 watts •Max. scan format 600 x 538 mm •Drivers and interfaces Macintosh / SCSI incl. workstation •Weight 480 kg

MEMMERT BE 800 incubator / oven with natural convection 70°C Capacity: 749 liters Temperature range: ambient temperature +5 °C to +70 °C Interior glass door Built-in digital temperature display 4 stainless steel shelves On wheels Power supply: 230 V Frequency: 50-60 Hz Power: 2000 W External dimensions (W) x D x (H): 119 x 75 x 161.5 cm Internal dimensions (W) x D x H: 103.5 x 60 x 120cm Tested at 37°C (36.2°C reading) and 50°C (48.2°C reading) Very stable indoor temperature, only a slight difference between the required temperature and the actual temperature

Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Rack Trolley for Daub Thermo Roll 86x85cm - Rack trolley for Thermo Roll oven - Extra deep rack trolley - with 10 pads

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

A profile and surface grinding machine RBW is available. Grinding quality class: 6, rotary table diameter: 800mm, grinding diameter: 800mm, max. workpiece height: 300mm, max. workpiece weight: 1000kg. Documentation available. An on-site inspection is possible.

This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.

Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.

This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details.

Transnorm conveyor belt with leading belt GF 4070+4430 -600-500 RA2052 Technical data: Conveyor length (NL): 8500 mm (4070 mm + 4430 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8500 ( 4070 + 4430 ) Nominal / outside width in mm: 600 Belt ...

This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Cooling tunnel for chocolate enrobing machine, Sollich, type KS 820

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

PROTEIN MACHINE TYPE MICROPLATE READER BIO-TEK 800 TS Absorbance Reader with Gen5RC 1 Unit Detection modes: Absorbance Microplate types:6- to 384-well plates Temperature control: To 50 °C (I” configuration) Read speed:11 secs /96 wells (sweep mode) Brand: BioTek With Computer UPS 1.0KVA CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com

automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm

Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

Cambio 800D, 6 Arm AirTen, built in 2018. Well preserved Cambio 800 with 6 x direct drive, latest current model! 90 kW rotor drive! Each individual spiked roller is driven by 4.0 kW each. AirTen rotor with 6 tools. Feed up to max. 120 m/min possible. To sell on behalf of a customer. Machine can be viewed at any time.

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machinebi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - .ucymachines/ Contact us at - sales@ucymachines

- banding machine - Standard Version - with the existing accessories

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

Key data: 2300 kN, 50 mm

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VRB 82457 -Cooling capacity: 20 kW -Fin spinning: 7 mm -Fans: 2 x 450 mm -Dimensions: 2060 x 900 x 750 mm -Stainless steel housing and block -Electric heating -Volume: 34 L -Weight: 200 kg -Quantity in stock: 1 -Reference number: CH 602 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General No.30223/88 Floor space1,7x0,7 m Total height1,2 m Weight800 KgMinerals & inorganicPlastic & rubberDyes & pigmentsOther feedAnimal feedHammer MillsE-waste & metalOrganicsDiscountFeed additivesCatalysts & fillersConsumer wasteEngelsmannIndustries > Chemical > Minerals & inorganicIndustries > Recycling > Plastic & rubberIndustries > Chemical > Dyes & pigmentsIndustries > Food & Feed > Other feedIndustries > Food & Feed > Animal feedMills > Hammer MillsIndustries > Recycling > E-waste & metalIndustries > Recycling > OrganicsDiscountIndustries ...

Evaporator Goedhart -Type: SRU 81507 -Cooling capacity: approx. 15 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 930 x 840 mm -Stainless steel housing and block -Electric defrost -Volume: 23 L -Weight: 140 kg -Quantity in stock: 2 -Reference number: CH 600 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm -Sheet thickness: 23 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 800/800/H128 mm -Weight: 136 kg

Offer 26127 Technical data approx.: - Load capacity approx. 3000 kg - Loading area between side stanchions L 4.00 x D 0.94 m - Loading area without. Side stanchions L 4.00 x D 1.04 m - Loading height approx. 0.7 m - Stake height 0.5 m - Drawbar length 1.1 mm - Length with drawbar approx. 5.9 m - Drawbar can be mounted on both sides - Width approx. 1.1 m - Weight approx. 450 kg - Tyres air 460 x 140

Sartorius Certomat BS-1 50mm Heated and Refrigerated Incubator Orbital Shaker 8865329 50 mm Orbital stirring mode: 50 mm diameter Stirring speed: 40 to 400 rpm Max. accuracy ±1% of the final value Incubation temperature: –10 °C to +70 °C External dimensions: 1150 x 720 x 770 mm Internal dimensions: 890 x 495 x 650 mm Weight: 198 kg Steel construction, stainless steel interior Brushless motor, triple eccentric drive with adjustable mass compensation Tray 800 x 420mm Max. load 20 kg, mass compensation depending on load Stacking Up to 3 units, without speed reduction Protection IP21 Electrical specifications Connection Class l cold socket, separate cable approx. 3 m Protection class l 230 V Heating capacity 650 W Cooling capacity 500 W In excellent working condition

NEVER USED Specifications Manufacturer: Siemens Type: 8DH10 Voltage: 12 kV Rated current: 630 A Frequency: 50 Hz Short-circuit rating: 20 kA / 1 s Insulation: SF₆ gas insulated Year of manufacture: 2008 Standard: IEC 60265-1 / 62271 Features Compact medium voltage switchgear Hermetically sealed pressure system Integrated circuit breaker and earthing switch Suitable for transformer substations, industrial distribution and utility applications Made in Germany The units are visually in clean condition and available as shown in the pictures. Suitable for: Medium voltage distribution Transformer protection Ring main units (RMU) Industrial and utility power systems Contact for pricing, availability and additional information. GAS POWER HOLLAND

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) cap sorting system: Vibrating container weight [kg.]: 1,5

Machine, and good Condition Inspektion in our warehouse