ft 8 used for sale

BAZ Heckert CWK 800 BJ 1999

Injection moulding machine Engel DUO 4550/800 BJ 2004

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. The machine is currently set on 10 gram. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil at the first folding station, the machine will stop. Mechanical belt driven outfeed conveyor of ± 1.000 mm, mounted 90° on the machine to the semi automatic case packer, Benhil 8534. The Benhil 8304 ma ...

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2023). The machine is only used some weeks for trial production by the previous owner. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a direct connection with compensator (build on the machine) or with a hopper with agitator screw inside, mechanically drive from out of the main machine (loose delivered wit h the machine). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

This APV Gaulin 264 MC 15-8TBS homogeniser is a 3-cylinder machine which is designed for 1.000 liter per hour with a maximum pressure of 500 bar. The homogensier is equipped with 2-stages with ball valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer. Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 1.000 liter per hour, Stages: 2 Stages, Max. Pressure: 500 bar, Valve cylinder: Ball valves, Product: Dairy, Piston diameter: 51 mm, Motor: 22 kW - 380 V - 44 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Model: ARJES VZ 850 DK, Type: Two-shaft shredder, Year of manufacture: 2017, Operating hours: 4,200 h, Motor: Volvo Penta diesel, about 565 kW / 768 hp, Self weight: approx. 26,000 kg, Dimensions (approx.): 8,800 × 2,900 × 3,200 mm (L × W × H), Shredding system: Two-shaft universal shredder, Areas of application:, - Used timber (A1–A4), green cut, - debris, - Mixed waste/tires, model: ARJES VZ 850 DK, Type: Two-shaft shredder, Construction year: 2017, operating hours: 4.200 h, own weight: approx. 26,000 kg, Shredding system: Two-shaft universal crusher

table length: 1200 mm table width: 800 mm table height: 980 mm : kg weight of the machine ca.: 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table trolley TW 800 Stainless Steel Table Trolley Worktop top Shelf at the bottom Robust design Dimensions: 800 x 600 x 990 mm, WxDxH Mobile with 2 brake rollers Used equipment / as good as new

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

B&A REF: 9265 TON: 220 SCREW DIAMETER: 55MM SHOT WEIGHT: 523 STROKE VOLUME: 575CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: E-ONE CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 14.6KW SCREW DRIVE: HYDRAULIC

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

Condition NEW Brand NORD Type SK773.1 VL-80LH/4 TF RD Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 5,4 RPM i 260,18 Shaft size mm 50 mm Version IE2 Length 60.00cm Width 25.00cm Height 25.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Pull-off trolley for 80cm deep pull-offs NEWagen profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cm10 CushionsInterior dimensions: W: 118cm D: 64cmThe trolley is suitable for 80cm deep and 60cm wide ovenSee pictureWe have various large pullers and pull-offs in stockDetails see pictures

- used - manufacturer Hobart - type PF 801 - has 3 speeds - 1x 80 litre stainless steel kettle - 2x attachments, 1x whisk and 1x flat beater  see pictures for details.

KD Putz Sheet Metal Cleaning Machine Avidi 800 Product description Manufacturer: KD Putz Type: Avidi 800 Condition: used, functional, bakery condition Material: Stainless steel Cladding with emergency stop switch on castors, mobile For 58 x 78 cm trays, 2-edge on the short side Back output Power connection: 230/400 Volt / 4 A / 1.1 kW Exterior Dimensions: width 112 cm, depth approx. 92 cm, height 84 cm For details, see pictures.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

Dough machine / planetary agitator / planetary mixer- used- Manufacturer Hobart- Type H 800- has four speeds- 2x 80 liter stainless steel kettle- 2x attachments, 1x whisk and 1x flat beaterDetails see pictures.

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW! ( 4 pieces )Heat-resistant wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm hole à ̧: 12mm Load capacity: 150Kg per roller ́s see picture for details 

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : AVIDI 800 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edge baking and perforated trays. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 ? 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25?35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for single  ...

DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80ÂC  Data:Wheel à ̧: 80mm Wheel width: 28mm Hole à ̧: 12mm Overall height: 106mm Load capacity: 150Kg per roller  ́s see picture 

Goedhart DVS 84637 Internal volume 150 dm3 TS +55/-5 C PS/PT 28/40 bar Fluid R404A

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 80mm Wheel width: 28mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller ́s see picture for details 

For sale is a Keyence IM-8030 digital measurement projector with IM-8000 control unit. Year of construction is 2023. Prior sale and errors excepted.

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Heat-resistant swivel castors with (bright galvanized)Wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller Details see picture

A fully automatic tray sealing machine Sealpack is available. Packaging capacity: 10-12cycles/min, max. film width: 420mm, max. tool temperature: 210°C, max. sealing tool weight: 150kg, max. sealing dimensions X/Y: 280mm/345mm, max. tray height: 120mm, max. film roll diameter: 400mm, max. film core diameter: 3inch, max. roll weight: 65kg, closing pressure: 1450kg, tool trolley dimensions X/Y/Z: 1100mm/950mm/1400mm. Machine dimensions X/Y/Z: approx. 3150mm/800mm/1700mm, weight: approx. 1600kg. Including one tool trolley. Documentation available. An on-site inspection is possible.

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 1225x815x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 1225 mm x 815 mm x 13 mm Thickness 13mm Weight 25kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on request 

max. wheel diameter: 762 mm gear width: 116,84 mm max. module: min. module: total power requirement: 145 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 5,5 x 5,3 x 3,4 m With the GLEASON Phoenix® 800HG bevel gear grinding machine, manufacturers of spiral, hypoid, and other bevel gears for large components can significantly increase their productivity. The machine enables faster grinding processes while maintaining the highest accuracy and excellent repeatability. Its extremely robust machine design forms the basis for stable machining processes, even for large workpiece diameters of up to 762 mm. Combined with a powerful FANUC CNC control system, the 800HG offers maximum flexibility for a wide range of gear geometries—from spiral and hypoid bevel gears to special forms. Thanks to its well-thought-out machine concept, the Phoenix® 800HG allows for reduced setup ti ...

Baking plate / stone plate / oven plate for quail Piccolo 600x865x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 600 mm x 865 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

x-travel: 1400 mm y-travel: 1200 mm z-travel: 1325 mm control: Mazatrol Smotth G numbers of pallets: 2 size of pallet: 800 x 800 mm max. workpiece height: 1450 mm max. workpiecediameter: 1450 mm turning speed range - milling: 10000 U/min tool taper: BT 50 Tool changer: 120 pos. power capacity - milling spindle: 37 kW b-axis (table): 360000 x 1 ° rapid traverse: 60 m/min workpiece weight: 2200 kg total power requirement: 102 kVA weight of the machine ca.: 31 t dimensions of the machine ca.: 3,88 x 8,05 m equipped with: - CNC Control MAZATROL Smooth G - ATC 120-fold (BT 50) - Chip Conveyor - HP Coolant with internal Spindle Cooling 70 BAR - 360000 ° positions indexing table - pallet changer with safety cover (2 Pallets) - Spindle cooling unit - Flood cooling - Niagara cooling / rinsing system - Blowout through the spindle - Coolant and chip protection through fully enclosed working space ...

Pullers for deck ovens 80cm deep NINEew pullers / pullers for deck ovensPullers made of ALUAspullers for 80cm deep ovenPuller dimensions : W: 115cm D: 58cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Fastening hook belowideal for pizza, rolls, small bread, baquettes, croissant etc. do we have various large pullers in stockDetails see picture 

BasysPrint 867 1500DPI Fully Automatic with 4 Cassettes and Bacher Punch One laser module with 2560 hours, optionally a second module can be offered. Operating counter plates: 404960 pieces Machine was discontinued due to plate conversion to thermal Dismantled by BasysPrint technicians and secured for transport. If you are interested, videos of the functionality can be sent via WhatsApp BasysPrint 867 1500DPI fully automatic printer with 4 cassettes and Bacher die-cutting unit One laser module with 2560 hours of operation; a second module is available as an option. Plate counter: 404,960 The machine was sold due to a plate conversion to thermal printing. Dismantled and secured for transport by BasysPrint technicians. If interested, videos of the functionality can be sent via WhatsApp.

Pullers with puller carriage for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cmInternal dimensions: W: 118cm D: 64cm10 pieces Pullers made of ALUAducts for 80cm deep ovenPuller dimensions: W: 115cm T: 58cmWe have various large pullers in stockDetails see picture 

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm CNC-control: SIEMENS table-size: 1000 x 560 mm max. table load: 800 kg spindle taper: SK 40 spindle turning speed range: 20 - 8.000 U/min feed stepless: 1 - 20.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 13 / 9 kW tool change unit: 20 Pos coolant: voltage: 380 V total power requirement: 35 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,50 x 3,50 x 2,70 m - Serial No.: 15415027604 - machine as good as new - Machine ON: 2.599 h program ON: 1.027 h - tool measurement BLUM-MICRO incl. calibration tool - infrared probe HEIDENHAIN TS 640 - Tool changer 20 pos. with double gripper - chip tray (no chip conveyor) - div. tool holder - coolant unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Code: 0285 Brand: CENTAURO Model: CO 800 - CE Standard Band saw for cutting wood, plastics, aluminium - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 500 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1625 x 940 x 2500 h Weight kg 630

Execution: max. pressure : 10 bar Number of candles : 24 Height : 30" Adapter : 7 (Code: 25) Gasket : Silicone Emptying : none Ventilation : TC 1.5" Surface : Mechanically polished Input/Output Connection: DIN 11851 Male Part DN80

Transnorm conveyor belt GF 15600-900-800 RA2217 Technical data: Conveyor length (NL): 15600mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 15600 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...

x-travel: 8000 mm y-travel: 2600 mm z-travel: 1500 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Schiebe- und Drehtisch 2 Stück table load: max. 20 t turning speeds: 100 U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 43 kW number of tables: faceplate: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Precision universal cylindrical grinding machine -Max. Shaft diameter: 203 mm -Max. Grinding length: 490 mm -Collet: Ø 32 x 87 mm -Grinding wheels diameter: 160 mm -Dimensions: 1660/1500/H1500 mm -Weight: 1802 kg

Used packaging machine Trepko type 821. New 2020. Technical specifications: Capacity: up to 100 packages/min. Capable of packaging cottage cheese, butter, or lard in 200g and 250g cubes. Power: 5.5 kW. Air pressure: 6 bar. Weight: 1,500 kg.

Furniture dollies, furniture dollies with plastic wheels, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, panel trolleys, pipe trolleys, pallet trolleys -Transport trolley: for Euro pallets -Material: Stainless steel (VA) -Length: 1218 mm -Width: 817 mm -Height: 260 mm -Version: 2x swivel casters, 2x fixed casters -Number: 27 transport trolleys available Price: per piece -Weight: 11 kg/piece

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer -Manufacturer: INA, bearing washer shaft washer for axial cylindrical roller bearings 20 pcs. unused OVP -Type: WS 811 12 -Carton: with 20 pieces of bearing washers -Quantity: 2 boxes available -Price/Sale: per carton -Carton dimensions: 100/150/H95 mm -Weight: 2.1 kg/piece