ft 8 used for sale

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 358 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/135, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V1600 G20F; Transport weight [kg]: 1600

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 3 , Flywheel SAE: SAE 10 , Working Hours: 250 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 2980 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/iveco-8061-si-13-05-used/1 99, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8061 SI 13.05; Transport weight [kg]: 900

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 237 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/134, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V71N 7083-7000; Transport weight [kg]: 1050

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/107, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1240

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/101, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1260

Engine Brand: DAF, Condition: USED, Engine Aspiration Type: TURBO INTERCOOLER , Bore: 118 mm, Stroke: 126 mm, Engine Capacity: 8270 cc, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-dhs-825-used/859, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DHS 825; Transport weight [kg]: 728

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-4bt3-9-cpl-8534-us ed/550, , = More information =, , Type: Engine, Type number: 4BT3.9 CPL 8534; Transport weight [kg]: 346

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-d348-98s-4n-89 27-used/810, , = More information =, , Type: Engine, Year of construction: 1010, Type number: D348 98S 4N-8927

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 246.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 246 Kw, Rated Speed: 1900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3406-11n-8n540 5-used/647, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 11N-8N5405; Transport weight [kg]: 1740

General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C Viscosity test machines MaterialStainless steel Information TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 342 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1330 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 850 , Generator Hz: 60 , Generator Volts: 600 , Generator Amps: 117 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3512-24z-8n-5806-g enerator-850-kva-used/304, , = More information =, , Empty weight: 10.800 kg, Type number: 3512 24Z 8N-5806 Generator 850 K

Engine Brand: DORMAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3215 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/dorman-8jt-used-engine-par ts/42341, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 2.390 kg, Type number: 8JT

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 225 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-43557 07-used/42350, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 940 kg, Type number: C7.1 881-4355707

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-45865 16-used/42338, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: C7.1 881-4586516

workpiece diameter: 1000 mm workpiece weight: - kg workpiece height: - mm Control: grinding wheel motor: 11 kW total power requirement: 25 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4100 x 3200 x 2600 mm Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich.

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

A tray packaging machine Multivac including an auxiliary packaging machine MCS 260 is available. Tray dimensions X/Y 1: 187mm/137mm, film width 1: 335mm, tray dimensions X/Y 2: 340mm/128mm, film width 2: 315mm, max. cycle rate: 15cycles/min, throughput: approx. 45trays/min, max. tray depth: 130mm. Machine dimensions X/Y/Z: approx. 4500mm/1050mm/2100mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Aircooled chiller CARRIER 30XB 0900 0041 890 kW Cooling capacity: 890 kW / 253.1 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Recuperation. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06TUA483SW1E (screw) Type of refrigerant: R134а Number of fans: 14 pcs. (Frequency inverter) Dimensions: 7.2x2.26x2.3 m Weight: 7321 kg Working hours: 6088/6061 h. Condition: Good

Dimensions (L/W/H): 1050x850x1300 mm Weight: 420 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4850x4650x1820 mm Weight: 6500 kg Total power requirement: 47 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1000x1350 mm Weight: 420 kg Total power requirement: 2,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1210x1160x1270 mm Weight: 1100 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5350x4650x1820 mm Weight: 7500 kg Total power requirement: 47 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.

Gorman Rupp 82H52 supra Electric starting. The perfect pump in combination of pressure and capacity., Sucks in very quickly., Widely used for spraying filters for well drainage, NEW and UNUSED 3 x in stock, Applications:, -Pumping surface water, -Spray scorching, - well drainage, spraying filters, - irrigation of sports fields, - drill and arc zinc work, , Max: 61 MWK (Pressure), Max: 45m3 H (capacity), , Available with any desired connection., If you are interested, we are happy to help you., , Throughput capacity: 45 m3/h, Max dirt passage: 19 mm, Motor brand: Hatz, Max. head: 61 MWK, Max dirt passage: 3000 rpm, Weight: 89 kg, , = More information =, , Year of manufacture: 2025, Empty weight: 89 kg, Cargo space capacity: 750 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, s ...

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design Description Topsoil: Cone bottom with 3% slope Threaded Socket DN50 Manhole 500 round Tank cylinder: Insulation 10 cm Ladder hooks Dip shaft sleeve with thermometer analogue Sewage DN100 Vapour trigger DN100 top Subsoil: Inclined cone base 3%Bevel Forward-drawn residual drain pipe DN120 3 feet with domes, height adjustable

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Last Use: Chemical Industry Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20° C Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Ladder hooks Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 12850 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4600 mm Height 2000 mm Diameter 2400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C Description Topsoil: Clapper bottom Downward-swept filling line DN50 CIP Cleaning Pressure fitting Tank cylinder: Cooling coil Ladder hooks Sample tap 5/8" Clear drain with threaded weld-on nozzle DN65 Level Indicator - Hose Subsoil: Clapper base 60° with cooling pipes Residual drain thread neck DN32 Conical flange DN 600 with outlet DN80 with disc valve 4 profiled feet with calottes height-adjustable

turning diameter over bed: 840 mm turning diameter over slide rest: 640 mm turning length: 3300 mm spindle bore: 74 mm turning speeds: 7,1-1400 U/min 3-jaw chuck: 315 mm steady: rapid traverse: turning dia. in gap: 920 mm length of gap: 370 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

The machine is completely overhauled and therefore as good as new! Technical data Drilling method: Lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 400 mm Max. workpiece length 400 mm Manufacturer: TBT / SFT New electrics and new CNC control Siemens! We see ourselves as a competent partner in the field of deep hole drilling. You are also welcome to send us inquiries in the contract processing of deep hole drilling work.

Features: Volume 16800 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 5100 mm Height 4000 mm Diameter width 2200 mm Surface inside 2B=IIIC ground Surface on the outside marbled at the front Description: Topsoil: curved bottom Airlock DN50 central 2 retaining brackets Tank cylinder: Level indicator with bar and scale Manhole 450 x 360 mm Tasting tap Nozzle Flap Size 37 Underbody: curved bottom Forward-drawn residual drain pipe central with disc valve DN65 flush with the tank wall 4 trumpet feet - fixed

x-travel: 4500 mm y-travel: 800 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 rapid traverse: 30/40/40 m/min table surface area: 5300 x 750 mm table load: 4,5 t tool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/min spindle motor: 29 kW spindle distance: 325 - 925 mm tool piece magazine with: 30 Plätzen total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m equipped with: - CNC-Control Heidenhain iTNC 530 - IKZ 20 bar - NC Swivable Table - Chip Conveyor - Coolant - Tool Changer 30-fold (SK 40) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Veit Tunnel Finisher 8657 with inbound and outbound transport Price from stock Külsheim 19.500 € In addition, the steam generator and compressor can be can be requested

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

Manufacturer: Reggiani Model : Renoir 808/71 Year of Manufacture: 2013 Type of Machine : Digital Textile Printing Machine Configuration:Without printheads Printing Width: 180 cm Printheads Capacity: Up to 16 printheads (not included) Drying System: Integrated dryer with steam heating Material Handling: - Large Dynaplast transport roller - Infeed frame with jaw drive for stress-free fabric feeding Material Compatibility: - Woven fabrics - Jersey fabrics Printing Modes: - Roll-to-roll - Caul printing - Pallet printing Condition: Used Find more here - / Contact us at -