126,718 used machines on RESALE, but how to find them? Machine Search
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours
Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Supports. Side guide on one side and on both sides Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 1900 Nominal / outside widt ...
- HeidenHain ND780 3 Axis dro - Variomatic RPM speedrange - Steady rest - Multi fix Tool system
Machine data: Control Heidenhain TNC 355 Year of manufacture 1989 Travel: X 600 mm travel Y 450 mm travel Z 400 mm travel Spindle speed 20 – 4000 min-1 Angle table size 850 x 440 mm Swivel table 650 x 395 mm Electronic handwheel The machine is still energized and in good condition.
- Double Hydraulic chuck - Double chuck front and rear with 360 bore - API Threading Cutter attachment - Safety cover dfor front and rear chuck - Conical turning carriage - Multi fix tool system
Height=0.913 m, Overall length= 0.818 m, Overall width= 1.709 m, Net weight= 2 kg,
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 800 to PRESS TABLE table surface (left-right): 2600 mm table surface (front-back): 2000 mm height above floor level: 540 mm SLIDE stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 460 mm/s working velocity min.: 25 mm/s working velocity max.: 44 mm/s return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS total power consumption: 180 kW DIMENSIONS / WEIGHTS total weight approx.: 95000 kg ATTACHMENTS (PRESSES) press automation: yes gripper transfer system: yes acc. to actual accident protection ...
Travel X/Y/Z: 800mm/550mm/550mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 65, control: Siemens 840D, spindle hours: approx. 16000h. 3-axis robot System 3R Transformer WorkMaster, year of manufacture: 2008, transfer weight: 150kg, stroke: 1500mm, pallet positions: 2x12. Including System 3R GPS 240 zero-point clamping system, Knoll chip conveyor, Knoll paper band filter, Blum LaserControl laser measuring system, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible.
A crawler-mounted crushing plant Remax including a land conveyor system is available. 1) Double roll crusher Remax CR 810 Hybrid, year of manufacture: 2015, operating weight: approx. 230t, conveyor belt width: 1600mm, conveyor belt length: 12200mm, discharge belt type: Mobcon, discharge belt width: 1400mm, discharge belt length: 40m, feed hopper volume: approx. 30m², feed hopper length: 4500mm, feed hopper width: 6000mm. Including plate conveyor (1.8m/9.5m) with crawler track, cleaning conveyor (2m/5.3m), transfer station (1800mm/1800mm), electrical equipment and control. 2) Two-part land conveyor system, year of manufacture: 2015, width: 1400mm, belt speed: 1.5m/s, conveying capacity: approx. 1000t/h, length 1/2: 190m/165m. The enclosure of the land conveyor system is only partially available. Documentation available. An on-site inspection is possible.
A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible.
Injection moulding machine Demag erg. 250/560 840 BJ 2001
grinding diameter: 1000 mm grinding length: 8000 mm swing diameter: 1200 mm centre height: 600 mm max. workpiece weight between centres: 10000 kg workpiece weight max.: 20000 kg workpiece turning speeds: 5 - 60 U/min grinding slide speed stepless: 22 - 2240 mm/min rapid travel - grinding head longitudinal: 3500 mm/min turning speed range - grinding spindle: 450 - 1610 U/min grinding wheel size: 425 /710 x 63 x 305 mm tailstock adjustment: max. 6000 mm workpiece-drive: 20 kW grinding motor: 30 kW crowning with reference to bobbin radius: 0,01 - 1,5 mm total power requirement: 85 kW weight of the machine ca.: 35,4 t dimensions of the machine ca.: 13,1 x 3,3 x 2,35 m Roller grinding machine with movable grinding spindle carriage - Hollow and crown grinding device - Telescopic covers - Coolant system - Position tolerance 0.005 The data for this ad was created with ModulMWS - the software s ...
DUGARD EAGLE 850 VMC CNC vertical machining center was built in 2007 in Taiwan by C Dugard Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. All machining processes, i.e. milling, drilling and threading, are performed fully automatically by a reliable high-speed spindle. A large, 24-position magazine selects the shortest possible access path to the cutting tool, thus significantly reducing production cycle times. All this is complemented by an advanced CNC control with many useful functions, which minimises the need for the operator to operate the machine. The EAGLE 850 VMC CNC machining center weighs 5500 kg. Technical specifications of the DUGARD EAGLE 850 VMC CNC milling machine - CNC controller: FANUC 0i-MC - feed in the X/Y/Z axis: 850/520/510 mm - rapid traverse in the X/Y/Z axis: ...
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
Pellet sifter Screening Machine Screening Technology Brand: VAV Scan Vibro Screen area : 800 x 1300mm - 1 decker Drive: 1.37 kW electric motor
turning diameter: 500 mm turning length: 800 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 34 kW max. Torque: 380 Nm C-Axis: 0,01 ° max. chucking diameter: 320 mm milling spindle: milling spindle motor: 22,5 milling head speed: 12000 U/min b-axis: +/- 110 ° tail stock: axis stroke:: x-axis: 480 mm y-axis: +/- 100 mm z-axis: 845 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN switching time: 30°: 0,4 sec turret:: number of toolpositions: 24 pos. tool taper: HSK A 63 total power requirement: - kW weight of the machine ca.: 10 t NC - turning and milling center - CNC control Siemens 840D Ergo Pro - Milling head with B-axis - Y axis - Coolant system (through Spindle) 15bar with paper band filter - chip conveyor - Tailstoc ...
Rittal control cabinet TS 8806.500 Rittal standard enclosure TS 8806.500 Lighting PS 4155100 220x80x60 cm (HxWxD) Powder-coated Air conditioner Rittal SK 3304500 EAN: 4028177251038 You can find more control cabinets in other sizes - new and used - in our shop! International shipping costs on request!
Table dimensions X/Y: 400mm/800mm, max. workpiece height: 300mm, grinding wheel diameter: 300mm-350mm, weight: approx. 2000kg. An on-site inspection is possible.
- Y Travel with head 180 = 3700 - Y from floorplate to spindle middle = 4200 mm - Chain ATC Tool changer 80 positions - Rotary table 1500 x 1500 with V-Axis 1500 mm - Table load 15.000 Kg - Optional Box table 3500 x 1000 x 1000 mm - Under power - Spindle hours 9300 H
SLIDE total force (nominal): 880 to stroke: 305 mm cutting velocity min.: 5 mm/s cutting velocity max.: 70 mm/s closing velocity: 200 mm/s returning velocity: 200 mm/s V-RING nominal force: 400 to stroke: 40 mm COUNTER RAM nominal force: 200 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 1010 mm lower table (front-back): 1600 mm upper table (left-right): 1000 mm upper table (front-back): 1000 mm shut height max.: 460 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 450 mm sheet thickness max.: 16 mm feeding step min.: 1 mm feeding step max.: 999.9 mm sheet length min: 3950 mm speed max.: 48 m/min &nbs ...
A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.
pressure: 60 t stroke: 400 mm daylight longitudinal/sideways: 820 x 300 mm dayligth: 900 mm liter capacity: 6,5 l feed down: 6,1 mm/sec feed up: 10 mm/sec Motor output: 2,2 kW weight of the machine ca.: 0,675 t dimensions of the machine ca.: 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale
Used HydReclaim Film Recycling System Manufacturer: AEC inc. USA Model 812 Electricity: 400 VAC, 50-60 Hz, 3-phase AEC Hydreclaim fluff weigh system Model 50 cubic foot
The machine is in good technical condition, testing possible by prior arrangement. 20,000rpm, 24,000 hours, iTNC 530.
TECHNICAL SPECIFICATIONS Manufacturer: Unknown Description: Ascending Conveyor Belt Wheelbase: 55,000 mm Belt width: 800 mm Drive power: 30 kW Horizontal conveyor length: approx. 25,000 mm Belt type horizontal: C-profile Conveyor length with pitch: approx. 30,000 mm Belt type with pitch: grid construction Discharge height: approx. 11,000 mm Hot-dip galvanized: yes Length of pavement: approx. 30,000 mm, on one side Outrigger: 1 pc A-supports Maintenance platform: Yes, drive station Distance between upper chord stations: 1,000 mm
BATTERIJ : 20 kW - 80 V Capaciteit: 3500 kg bouwjaar: 2015 Zijverschuiving automatische vorken
x-travel: 1400 mm y-travel: 1050 mm z-travel: 1200 mm Control: Fanuc 31i spindle turning speed - stepless: 6000 U/min spindle taper: ISO 50 spindle motor: 35 / 22 kW pallet table size: 800 x 800 mm workpiece weight: 2000 kg distance spindle center to table: 75 - 1125 mm Rapid Travel X / Y / Z-Achse: 24 m/min dimension of workpiece: 1450 x 1550 mm total power requirement: 71 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 7,3 x 4,3 x 3,75 m Horizontal 4-axis CNC machining centre - Fanuc 31i CNC control - 60-position tool changer (ISO 50) - Rotary table (1° division) with 2 pallets - High-pressure cooling 70 bar with cyclone filter system - Chip conveyor - Tool loading management - Renishaw RMP 60 - TS 27R tool probe Spindle running hours 6000h, running hours: 8050h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Switch-on hours 51800 h Program running hours 15100 h Specifications: Speed, max.: 12,000 rpm Power: 77 kVA Weight, approx.: 18,100 kg
Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, ma ...
Lippert belt conveyor GF 8560-550-400 RA1615 Technical data: Conveying length (NL): 8560 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 8560 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 1600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...
Lippert belt conveyor riser with arch GF 8530-550-400 RA2434 Technical data: Conveying length (NL): 8530 mm (riser 2000 mm + bow 6530 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 7285 ( 4000 + 3285 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor sp ...
König Brötchenanlage composed of: Dough dividing and rounding machine type REX Classic T6S Pre-proofer type ECO TWIN 800 with cutting station with Stüpfler (Kaiser) with lateral pretzel discharge Deduction - Bakery condition not cleaned - partially. in need of overhaul
Key data: 800 t, 1350 mm
Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no
Danoflex Ø 800 mm cylindrical abrasive grinding
Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
Lippert belt conveyor GF 8260-550-400 RA1621 Technical data: Conveying length (NL): 8260 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 8260 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
Year of construction 1988, with Marrel Grue 1150 crane: Year of construction 1995, 2-fold hydraulic extension to max. 7 m, 3650 kg maximum lifting capacity,
B&A REF: 9222 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2 MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
Vögele Super 800 asphalt paver, Technical specifications:, - Operating weight: 6100kg, - max. operating weight: 6300kg, - Operating hours: 3260h, - Year of construction: 2007, - bunker side wall hydraulically foldable, - ready for immediate use, Equipment:, - AB200TV Bohle, - 2x 35cm extensions
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...
Soyer KTS 850 Working Area: X 800mm x Y 750mm Positioning accuracy according to the manufacturer: +/- 0.2 mm Welding range from M3-M10 to 40mm length 2 welding heads: Head 1 works perfectly, head 2 no longer welds reliably but works. Intuitive component programming via dxf data Machine completely enclosed with safety-monitored door Weight approx. 900kg 2x welding machines BMS-10N tip ignition according to DVS leaflet 0903 with gap and contact welding Weight approx. 20Kg 2x Universal vibrator UVR-300 Automatic bolt feeding from M3 to M8 and bushings up to M5 Weight approx. 48kg/vibrator plus accessories Other accessories: Various bolt holders for external threads from M3 to M8 Various push-in pistons with spacer rings for different bolt lengths Pneumatic Mass Tensioners Various feed hoses from M3 to M8 male thread
maximum number of results exceeded
please refine your search
