ft 8 used for sale

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile racking -Width: 620 mm -Depth: 800 mm -Height: 1660 mm -Quantity: 2 available Price: per piece -Weight: 50 kg/piece

Geared motor, electric motor, electric geared motor -Speed: 25 rpm -Power: 0.55 kW -Design: Hollow shaft -Brake -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 16 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

starter -Voltage: 24 V -81466 - 002 - 24 V 008 -Weight: 20 kg

Braking resistor, charging resistor, damping resistor, filter resistor -BW 215 -150 ohms Item No.: 8254354 -600 W -Number: 2 resistors available Price: per piece -Weight: 5 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 2000 mm -Depth: 800 mm -Height: 890 mm -Weight: 145 kg

Reflective light barrier, light barrier -11-30 V DC Price: per piece -Quantity: 2 available -Weight: 0.7 kg

electric motor, three-phase motor -Power: 0.75 kW -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B14 -Protection class: IP 54 -Weight: 13 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 0.75 kW -Speed range: 120 to 600 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 18 mm -Dimensions: 550/240/H230 mm -Weight: 34 kg

Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 0.75 kW -Speed range: 39 to 213 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg

electric motor, three-phase motor -Power: 1.15 kW -Speed: 500 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -Weight: 11 kg

Milling tool holder, attachment milling arbor -Recording: PK50 -Cutter: Ø 32 mm -Weight: 7 kg

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 18 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 1/N/PE AC 230V 17A 50/60Hz -Output: 3/AC 0-230V 9.5A 2.2kW 0-480Hz -Dimensions: 80/280/H215 mm -Weight: 4 kg

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Quantity: 2 available -Weight: 0.6 kg

3/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 400 004 Price: per piece Quantity: 5 available -Weight: 0.4 kg

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available -Weight: 0.3 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 231 004 -Price: per piece -Quantity: 1x Available -Weight: 0.3 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 015 025 -Number: 1x valve available -Price: per piece -Weight: 0.7 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 235 101 Price: per piece Quantity: 3 available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 221 012 -Price: per piece -Quantity: 2 available -Weight: 0.5 kg/piece

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 022 503 Price: per piece Quantity: 5 available -Weight: 0.4 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 2 milling cutters Price: complete -Weight: 11 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 5 milling cutters -2x: left -3x: right Price: complete -Weight: 6 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 9 milling cutters -4x: left -5x: right Price: complete -Weight: 3.8 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 6 milling cutters -2x: left -4x: right -Price: complete -Weight: 4.6 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 2 milling cutters Price: complete -Weight: 12 kg

Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg

Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8kg

Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 15 mm -Price/Sale: complete -Weight: 0.9 kg

Switches, pushbuttons -Type: 800MR PA16 -Max.: 300 VAC Price: per piece -Number: 23x Available -Weight: 0.15 kg

Keyboard, logistics module -Manufacturer: Witron -Type: 88100159 -Price: per piece -Number: 2x available -Weight: 0.9 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

PLC control, compact device -Manufacturer: SIEMENS -Type: Simatic S5-95U 6ES5 095-8MA03 -Number: 2 modules available Price: per piece -Dimensions: 145/135/H140 mm -Weight: 1.3 kg

THERMO SCIENTIFIC 8000 WJ CO2 Incubator / Oven Water Jacket Technology (WJ) Model 3429 Capacity: 184L CO² range: 0 to 20% CO² inlet pressure: 103.4 kPa. CO₂ sensor: CT Temperature range: +5°C UT to +50°C. HEPA filter inside. Glazed interior door. Aluminum control panel with digital display. 4 stainless steel shelves 1 container of water External dimensions HxWxD: 100x66x60cm. Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm. 230V 50/60Hz. Net Weight: 120.2 kg Equipment tested at 37°C with a CO2 level of 5% In excellent working order and aesthetics Slight rust marks on the back of the outer shell (see photos) HEPA filters will need to be replaced The equipment will be delivered with the water jackets emptied. It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations Year of Manufacture: 2009

Thermo Scientific Multidrop 832 Microplate Dispenser The Multidrop 384 is an automatic, programmable eight-channel microplate dispenser. It features a peristaltic pump for fast, continuous dispensing of liquids into 96- and 384-well microplates. Microplate Dispenser 96 and 384 Precision, speed and reliability in distribution. Possibility of distribution by selecting the number of columns. External dimensions: 31x32x18 cm Weight: 7Kg Dispensing accuracy: 5 μL: ±3% (typical) 20 μL: ±2% (typical) 100 μL: ±1% (typical) Dispensing speed: 96-well plate: 20 μL in 5 seconds; 50 μL in 8 s 384-well plate: 20 μl in 20 s; 50 μl in 25 s Year of manufacture: 2005

LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072

cutting diameter: 800 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Used roasting/baking oven from Food Design Applications – Ireland Model: MSOG/2-100/800 Burners: Lanemark International Heating power: two burners: 2x 170kW = 340kW It is possible to connect steam. It can also work as a cooler, dehumidifier Two independent zones Electric blow height adjustment Electric blowing force adjustment Electric belt speed control Direct wash possible Indirect heat distribution system (tubular heat exchanger) Lower waste tray Stainless Tape, Braided with Belt Tensioning System Complete stainless steel chimneys, including exhaust gas control fans Natural gas Dimensions: Chamber (tunnel) height (adjustable) max. 250mm Tape width 950mm Belt width – working space 920mm Length of the whole machine 10250mm Baking Length 8000mm Machine width 2030mm Height with motors 3250mm Acid-resistant design.

Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /

Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 288 -Pmax: 315 bar -Quantity: 1x valve available -Dimensions: 215/46/H75 mm -Weight: 1.9 kg

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 � ...

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -