128,272 used machines on RESALE, but how to find them? Machine Search
Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder -Stroke: 260 mm -Piston diameter: 80 mm -Piston rod: 18 mm -Total length: 610 mm -Total length extended: 870 mm -Weight: 6.55 kg/piece
ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons
Key data: 670 mm, 830 mm, 600 mm
Control: HEIDENHAIN ITNC 530 Travel: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Workspace Turntable diameter 800 mm, 9 T-slots, Table load 1200 kg, Tool changer Tool holder: HSK-A 63 96-fold tool changer Tool length max.: 300 mm Tool diameter max.: 75 mm Tool diameter with adjacent empty station max.: 125 mm Tool weight max.: 7 kg Tool change time: 3 s Rapid traverse and feed Express feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, Oil mist extraction IKZ Conveyor Nominal power 90 kVA Full load current 125 A max. current load 200 A 400 V 50 Hz
-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010
Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...
Mak 8M332 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information
Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 65 mm -Transport roller width: 820 mm -Total length: 830 mm -Socket: Ø 11 mm -Number: 17 rolls available -Price: per piece -Weight: 1.5 kg/piece
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 65 mm -Transport roller width: 820 mm -Total length: 830 mm -Socket: Ø 10.5 mm -Number: 3 rolls available -Price: per piece -Weight: 1.5 kg/piece
Technical data of the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbeam, new Material colour: Ral 2004 orange Box profile: 100 x 50 mm Truss type: PNB 0480 Agraffe: 4 HK (hook) Weight | Pcs.: approx. 7.21 kg Clear width: approx. 1,825 mm max. load per pair of trusses 2,000 kg at the same price. Distributed Load 02x Locking pins, new Execution: complete galvanized To secure the longitudinal members against unintentional lifting Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=
Transnorm conveyor belt GF 13900-900-800 RA2211 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): please contact Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 scop ...
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 275/190/H155 mm -Weight: 12 kg
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg
electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg
Completely overhauled fuel injector, even used ones we have all in stock
LBBC Steam Autoclave 800mm diam. x 1.2m long Quick Lock Door Hydraulic Test Pressure 180psi Safe Working pressure 120psi Welded construction
used
Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm
Metrohm 848 Titrino plus Titrator Dynamic Titrations (DET) with automat. Equivalence point Montone Titration (MET) with automat. Equivalence point Endpoint Titartion (SET) Red-Ox titare ions (e.g. iodometry, permanganometry, etc.) Complexometric titrations Titarions with pol. Electrodes (I pol.; Upol) etc.
Listing ID: 22707 Brand: CUMMINS Model:NT 855 M Power: 275 hp1800 rpm Dry Weight :+/- 1300 kg Dimensions: 130 x 82 x 136 cm
Button machine, toggle press, crimping machine -pneumatically operated -The machine is also suitable for processing snap fasteners, canvas eyelets... -Tool -Dimensions: 610/470/H1380 mm -Weight: 52 kg
Control unit for overpressure encapsulation system -Number: 1x available -Price: per piece -Dimensions: 270/160/H90 mm -Weight: 1.4 kg
Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece
LISTING ID: 22630 BRAND:IVECO MODEL: 8210 M22 POWER: 162 kW (220 hp) CD RPM: 2200 DISCPLACEMENT: 13.8 L BORE x STROKE (mm) 137 x 156 COMPRESSION RATIO: 16:1 HS CODE 84081019 NET WEIGHT 1130 kg (Dry)
Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg
Gear motor, electric motor, electric gear motor -Speed: 76 rpm -Power: 0.55 kW -Construction: bevel gear B5 -Diameter hollow shaft: 25 mm -Rezess: Ø 70 mm -Hole spacing: 55 mm -Protection class: IP 55 -Dimensions: 355/210/H155 mm -Weight: 15 kg
RECON - Part number 0405 2460 - Fully polished - from a new engine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
Key data: 3000 mm
Fiber Laser Machine YAWEI HLF with TOP Equipment - IMMEDIATELY AVAILABLE Laser power: 8kW Sheet format: 3000 x 1500mm Automatic changing table Siemens touchscreen control with LAN/USB Sheet metal layer measurement Siemens Drives Small parts conveyor belt Ball roller table for scratch-free material handling Precitec Auto Focus Procutter Cutting Head with Autofocus MAX Photonics Resonator with 8kW The machine will include "everything" 2-year warranty CAD CAM Software Commissioning Delivery within Germany and Operator / software training offered. We even provide on-site support during unloading + insertion. D7u2d3s The machine is a new machine and available from stock. An identical one can be tested with us at any time under power. In our exhibition we have various laser machines from our manufacturers under power and various materials to test. We would be happy ...
x-travel: 5000 mm y-travel: 2500 mm z-travel: 1500 mm Control: Typ Fidia C20/6H-SB total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg
Exterior mirror, exterior mirror -Number: 2x exterior mirrors, right and left -Price: complete -Manufacturer: VW -No.: 2D1 857 502A 01C -Weight: 3.6 kg
Gear motor, electric motor, electric gear motor -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg
Key data: 500 mm
804337 Spindle and nut X-axis TOS TRENS SN50 series
Stock number: 3739 CNC LATHE Manufacturer: RIKA, Type: D 8004-2 Machines NO.: 622160, Year of manufacture: 1999 Specifications: Max. circumferential diameter 240 mm dia. Turning length 350 mm Main motor power 5 kw Spindle bore 40 mm dia. C axis - main spindle movement 360 degrees Z ash movement 170 mm Z 2 Axis Movement 782 mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Sub-spindle Accessories: Hydr. Chuck main spindle mm dia Hydr. Chuck Subspindle mm dia Chip conveyance. Cooling water system. Length: 1600 mm, Height: 2100 mm, Width: 3100 mm, Weight: 2000 kg
Silo 8 m³ volume, payload, dead weight 1450 kg Diameter 2500 mm, height 4200 mm, outlet height 1050 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Filter frame in the silo roof (with filter on request) Footprint 1800 x 2400 mm
Key data: 800 mm, 670 mm, 500 mm
High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.
Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg
Line filter for frequency converters -Manufacturer: Corcom -Type: 80FCD10B -Number: 1x filter available -Price: per piece -Dimensions: 310/170/H140 mm -Weight: 8 kg
Silo 8 m³ volume, payload 14 to, dead weight 1450 kg Footprint 1800 x 2400 mm, height 4200 mm Spout height 1050 mm Outlet NW 250 Inspection Cover NW 500 Silo butterfly valve Blow-in line, vent line
Silo 8 m³ volume, payload 14 to, dead weight 1600 kg Footprint 1800 x 2400 mm, height 5000 mm Spout height 1800 / 2000 mm Outlet NW 250 Inspection Cover NW 500 Silo butterfly valve Blow-in line, vent line
Gear motor, electric motor, electric gear motor -Speed: 105 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x engines available -Price: per piece -Dimensions: 520/200/H225 mm -Weight: 32 kg
Gear motor electric motor Electric gear motor -Speed: 47 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 48 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 415/210/H260 mm -Weight: 20 kg
Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg
Silo 8 m³ volume, payload 14 to, dead weight 1450 kg Footprint 1800 x 2400 mm, height 4200 mm Spout height 1050 mm Outlet NW 250 Inspection Cover NW 500 Silo butterfly valve Blow-in line, vent line
filling amount: 180 l injection pressure: 1,3 bar : 700 l/min diameter: 800 mm voltage: 400 V frequency: 50 Hz dimensions: ca. 1200x1300x1100 mm weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Alternator regulator -Manufacturer: Bosch -Type: 0190113 004 850 -Number: 1x controller available -Price: per piece -Weight: 1.6 kg
5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg
maximum number of results exceeded
please refine your search
