129,384 used machines on RESALE, but how to find them? Machine Search
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
direct imaging very good condition in western europe, Print numbers: 11mio, Format: 37 x 52
PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: steps of 0.1 mm; correction ±2% Anilox roller internal diameter: 136,989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Drying Gas Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems ...
Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm Air core diameter 76,510 mm Repeat steel lock 310 mm Max. print length 600 mm Printing length setting In steps of 0.1 mm; set print length max. correction +/- 2 % Anilox cylinder Inner diameter 105,158 mm Perimeter 400 mm Sleeve length 900 mm Max. mechanical speed of the machine 300 m/min Operational printing speed of the machine It depends on the type and quality of the printed material, printing inks, ink transfer, printing length, printing plates, type of the printed motive: cross lines - picture screen density, capacity of anilox cylinders, reprint of inks, varnish, etc., environment temperature and doctor blade type. OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Soph ...
1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...
Canon Image Press V1000 Year:2022 Print Speed (BW/CL):100 ppm Recommended monthly volume: 75,000-600,000 pages Maximum monthly peak volume: Up to 1.2 million pages Registration tolerance: Front to back: 0,70 mm Printing method: Colour Laser Beam Printing Print Resolution (dpi): 2,400 x 2,400 Machine type: A3 Digital colour Press cut-sheet Core functions Reading: 600 dpi x 600 dpi Printing: Up to 1,200 dpi x 1,200 dpi Processor: 1.8GHz, 1.3GHz Dual Control Panel: 10.1 inch Memory: 6GB Hard Disk drive SSD 240GB Mirroring Hard Disk Drive: Yes Interface Connection: NETWORK Standard: 1000Base-T/100Base-TX/10Base-T Power supply: 220-240V/16Ax2(Main Station), 220-240V/16A(Fusing Station) Dimensions main engine (W x D x H): 1,583 x 872 x 1,040 mm Weight: Approx. 410 kg Copy Speed (BW/CL): 100 ppm First-Copy-Out Time (A4) (BW/CL) Weight ...
Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area) ...
Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph
Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg
Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
Kettner Pressant 300 Masch-Nr. 92/56001 With accessories, intermediate layer lifter, pallet magazine and pallet transport. More images available. Kettner Pressant 300 Machine no. 92/56001 With equipment, layer pad remover, pallet magazine and pallet transport. More pictures available.
Kettner Type: Pressant 2000EP Model: Box Depalletizer Year of construction: 1990 Capacity: max 40 pallets/pcs.
Kettner Year of construction: 1990 Type: Pressant 2000EP Model: Box Palletizer Capacity: max. 40 pallets/pcs.
S. No.: 43000129 Counter: 61 Mil. Clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm with Donaldson Ultrafilter Very good condition / tested, checked, cleaned, dismantled & secured by a specialist.
Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW
Tung-Yu Cold Forming Press 22” x 24” deep platens 12” daylight Pressure up to 35/40ton Year 2015 Overall dims: 1.2m deep x 1.8m x 2m high Weight: 2000kgs +/-
Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.
Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.
Roller press Make Swift Model roller press 61 Year 1980´s ? Width 610 mm Available Direct
Roller press Make Swift Model Roller press 76 Year 1980´s ? Width 760 mm Available Direct
new
Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;
Key data: 300 mm
Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg
Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986
Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar
Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg
Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
bizhub PRESS C1060 = Equipment No: 1817933817 – Digital Printing Machine Incl. DF-626 Original Feeder, PF-707 Paper Cassettes, SD-506 Finisher, PB-503 Perfect Binder, IC-308 ext. EFI Controller incl. VI-507 Interface kit, RU-509 Connection Unit
bizhub C3350 = Equipment No: 1818829867 – Color MFP Incl. PF-P13 second paper cassette, FK-512 fax module
Reference Num.: 4147 Brand: Xerox Type: Versant 180 Press Construction year: 2016 Impressions: 5 mio Available: directly Status: Not in production Location: Deutschland Machine size: Length: 1,212 mm, Width: 760 mm, Height: 831 mm Total weight: kg 295 / lbs 650 Equipment: - Duplexdruck - Finisher - Scanner
Reference Num.: 4148 Brand: Xerox Type: Versant 180 Press Construction year: 2016 Impressions: 4 mio Available: directly Status: Not in production Location: Deutschland Machine size: Length: 1,212 mm, Width: 760 mm, Height: 831 mm Total weight: kg 295 / lbs 650 Equipment: - Duplexdruck - Finisher - Scanner - Fiery
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3800 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 2200 operating hours
ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /
The Xerox iGen 150 Press is a high-performance digital printing press designed for commercial and industrial printing environments. It is known for its productivity, versatility, and print quality, making it a popular choice for print service providers. Key Specifications: - Print Speed: 150 pages per minute (ppm) - Monthly Duty Cycle: Up to 4.8 million pages - Print Resolution: 2400 x 2400 dpi for sharp image quality - Paper Handling: - Max Sheet Size: 364 x 660 mm (14.33" x 26") - Stock Weights: 60 to 350 gsm - Supports coated and uncoated stocks, textured papers, and synthetic materials - Color Management: Integrated with Xerox Automated Color Quality Suite (ACQS) for consistent, accurate color reproduction - Variable Data Printing (VDP): Ideal for personalized marketing materials Features and Benefits: - Productivity: High-speed digital press suitable for large-volume printing wi ...
This Press laminating machine is the perfect solution for automotive, aerospace, and various manufacturing applications. Built before 2015, it offers exceptional precision and durability .Designed to handle large and complex laminating projects efficiently, this machine is ideal for businesses seeking to improve quality and productivity. We have three machines from different years ( two dated before 2015 and one from 2018). Machine details : Dimensions (L x W x H): 3600 mm x 2850 mm x 4530 mm Table Size: 1600 mm x 900 mm Weight: - Overall: 4300 kg - Lower part: 4900 kg - Upper part: 4300 kg Find more here - / Contact us at -
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
Description N ° 1 column for Mir 270: length: 2900 mm diameter: 100 mm conditions: new
Description Thermoforming with vacuum and pressure Twin heated surface Working surface 1000 x 700 Vacuum pump Adjustable air presure Used to proceed PPSU
Size: Equipments: with pressing unit Upright stack delivery
Manufacturer: Brunotte & Niemeyer Year of Manufacture: 1968 Type of Machine : Hot cure tire press - Open/close system with hydraulic spindle - Plc cabinet - Press on it self can load tyres by own boards - Air max: 16bar pressure inside - Standard working pressure 8 bar - Hydraulic pump - Heating: Steam - Accessories: optional 24R20.5 XS mould Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
