frozen grinder used for sale

Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V

Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

Key data: 150 mm, 6800 mm

Long belt sanding machine Langzauner LZG-E Long Fence Long Belt Sanding Machine, Belt Sanding Machine, Good Condition A long-belt sanding machine from the manufacturer Langzauner is offered here. The machine is in good condition, has a high quality workmanship and is comfortably equipped. A turntable is installed in the table (retractable) so that the workpiece can be rotated quickly. The turntable is raised slightly at the touch of a button by means of a pneumatic cylinder, so that the workpiece can be rotated without much effort. A high-quality and fully equipped sanding machine. Technical data: Table dimensions 2500 mm x 1000 mm Large stand load 1000 mm Motor power sanding belt 3/4.2 kW Fan motor power 1.1 kW Belt speed 11/22 m/sec Belt length 6800 x 150 mm (incl. spare sanding belts) Table height adjustment range 280 mm Electric table height adjustment Weight appro ...

Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg

Used spices in glass jars with grinder production line. Cartoning Machine The UNILINE AU-10-TA-R TF600x400x1500 automatic packaging line consists of: 1.TA-R grouper. 2.TF600x400x1500 tunnel. 3.UNILINE packaging line. Control cabinet containing the control equipment. This machine was designed and built for the production of bulk packaging of a given product. Packaged product types: •Grinder on a 2x3 foil tray with rim. •Grinder on a 2x2 foil tray with rim. •Grinder in 2x3 foil. •Grinder in 2x2 foil. •Grinder in 2x3 foil. •Grill tube in 2x3 foil. Grill tube in 2x2 foil. Sealer The machine consist of: •Feeder •Sleeve applicator head •Guide rollers •Sleeve ejection assembly •Format change kit •Infeed screw mechanism •Feeder assembly •Sleeveless package ejector assembly •Applicator pin assembly Optic check The s ...

G&N Kugelmüller MPS 1 Cup Grinder -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Year of construction 1996 -Drive motor 0.6KW -Machine enclosure -Well-maintained original condition Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150Kg

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

G&N Kugelmüller MPS 1 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg Errors / input errors excepted Hjbsvtrr Tjkn Au S Tol

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

Bench grinder ELU with belt sander, 230 V

Angle grinder MAKITA GA 5030 max. 125 mm, case

Drill Grinder KAINDL Schleiftechnik Typ BSG20/2 Bj. 2021-012, S/N 22104, Benchtop Tool

Double bench grinder REMA DS04/150 built in 2013, S/N 131024008, 160x25x51 mm, 400 V

Triangle Grinder BOSCH PMF220 CE Year 2017, Case

22,000 rpm, spindle Ø6 mm, maximum wheel capacity 25 mm, never used Overall dimensions: 250 x 200 x 100 mm Weight: 2 kg Auction-ID: A7-45834-311

22,000 rpm, spindle Ø6 mm, maximum wheel capacity 25 mm, never used Overall dimensions: 250 x 200 x 100 mm Weight: 2 kg Auction-ID: A7-45833-311

Height=1.15 m, Overall length= 0.95 m, Overall width= 0.7 m, Net weight= 215 kg,

Height=1.27 m, Overall length= 1.3 m, Overall width= 0.7 m, Net weight= 277 kg,

Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils

TOOL/CUTTER GRINDING MACHINE Inv. No. 12.993I1 Make PEETERS Model AP Distance between centers 500 mm Height of centers 120 mm Table movement 400 mm 4 spindle speeds 2900 – 5800 RPM Table length 840 mm Table width 140 mm Weigth 890 kg Auction-ID: A1-45737-125

TOOL/DRILL GRINDING MACHINE Inv. No. 13.031IM Make FARMAN Model FC 50N Mach.no. 6048 X axis (Left / Right) stroke 240 mm Y axis (Front / Back) stroke 180 mm Z axis (Up / Down) 110 mm Swiveling Shaft (angle) 0 - 20° Drill Size ø2 - ø51 mm Point Angle 40° - 180° Clearance Angle 0° - 18° HP 0.5 Volts 380 Cycles 50 Auction-ID: A1-45737-130

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

Angle grinder MAKITA GA9020R, year 2019, SN 636777R, cut-off wheel 230 Förch Beton, case

A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.

Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Bench grinder Grinding wheel diameter max. 400mm Speed 1420rpm see pictures Condition: unchecked (6) Auction-ID: A7-46460-572

Grinder Risco -Type: TR 130 -Power: 11.8 kW -Throat diameter: 130 mm -With 200L trolley loading -Capacity: 200L -Knife and sieve set -Weight: 600 kg -Dimensions: 1300 x 1950 x 2780 mm -Power supply: 400V 3Ph 50Hz -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Mounting diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A7-46460-583

Grinder Risco -Type: TR 130 -Power: 11.8 kW -Throat diameter: 130 mm -With 200L trolley loading -Capacity: 200L -Knife and sieve set -Weight: 600 kg -Dimensions: 1300 x 1950 x 2780 mm -Power supply: 400V 3Ph 50Hz -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Disc diameter 300mm Disc width 40mm Speed 1500rpm Power: 1.1KW see pictures Condition: unchecked (6) Auction-ID: A7-46460-604

Technical Specifications Height of tips: 171 mm Center spacing: 430 mm Maximum grindable length: 400 mm Maximum load allowed: 150 Kg X-axis travel: 170 mm Z-axis travel: 600 mm Fast feed: 12 m/min Spindle: 830 rpm; 24 Nm Grinding wheel dimensions: 508 x 80 x 203.2 mm Motor power: 7.5 kW Control: FAGOR 8055 TCO Approximate weight: 4500 Kg Accessories: Fume extractor; Paper filter; Mechanical filter; Grinding wheel balancer system Notes: 0-9° swivel table; Adjustable workpiece head; Inverter to keep the peripheral speed of the outdoor grinding wheel constant; Workpiece clamping device with pneumatic system; Tailstock with hydraulic opening and device for cylindricity search Item sold in unverified status Auction-ID: A1-44614-17

\" Industrial double bench grinder in heavy cast iron design on a stable column. Suitable for grinding and deburring work in workshops and maintenance. Version with two grinding stations, protective covers, workpiece supports and task light. Condition • Used • Manufacturer: ELBTALWERK Heidenau (GDR) • Type: Double bench grinder on column • Motor power: 0.18 kW • Speed: 3,000 rpm • Voltage: 220 / 380 V • Frequency: 50 Hz • Phases: 3-phase • Grinding wheel mount: both sides • Grinding wheels (approx.): Ø 135 mm • Power factor cos φ: 0.8 Dimensions (approx.) • Total width: 500 mm • Total depth: 500 mm • Total height: 1,350 mm \" Auction-ID: A7-46417-62

\" Compact industrial double bench grinder on a stable column. Suitable for grinding and deburring work on benches / workstations. Version with grinding wheels on both sides, protective covers, workpiece supports and task light. Condition • Used • Manufacturer: VEB Galvanotechnik Leipzig (GDR) • Type: ES 160/32 • Motor power: 700 W • Current consumption: 3.5 A • Voltage: 220 V • Frequency: 50 Hz • Speed: 3,000 rpm • Operating mode: S2 – 30 min • Protection class: IP43 • Max. grinding wheel Ø: 160 mm • Max. grinding wheel width: 32 mm Dimensions (approx.) • Total width: 500 mm • Total depth: 500 mm • Total height: 1,150 mm \" Auction-ID: A7-46417-63

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-46460-456

Disc diameter 350mm Speed 1400rpm Power: 1.8KW see pictures Auction-ID: A7-46460-558

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-46460-602

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-46460-591

Grinder Meissner -Type: AM 130 -Power: 13 kW -Throat diameter: 130 mm -Dimensions: 1250 x 1130 x 1300 mm -2 gears -With mixing arm -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Condition: Used in very good condition, ready to work, overhauled

Equipped with: Grohe built-in reservoir, Saniwell Pro Up tileable, movable by means of wheels Auction-ID: A1-40111-125

Lex 3 150mm, 2 Plates, Screws, Polishing Discs, Velcro Discs Auction-ID: A1-46501-2038

125mm cordless angle grinder, unused Auction-ID: A1-40418-334

Bäuerle Long Belt Grinder Auction-ID: A1-46501-2613