frozen grinder used for sale

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

Main technical parameters: 1. Production capacity: 3000kg/h Total power: 11kw material channel width: 540mm Material channel height: 240mm Cylinder stroke: 700mm Gas source pressure: 4-6 kg/cm 2 Processing raw material meat specifications: 700 × 520 × 200 (mm) Weight: 800kg External dimensions: 2150 × 1030 × 1220 (mm)

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

EGLI Model V1 Usage :Frozen Butter Bulk Shreader /cutter Condition : Good Location : Dairy Machinery UK

Frozen in time Ltd Mini Lablyo Freeze dryer 2017, bench top freeze dryer with adjustable temp display, 20cm x 25cm deep ice condenser, chamber with 3kg ice capacity, condenser temp -55'C,

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

APV 16" Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16" wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625" x 1.25" - 3/60/480v - Machine on casters - Footprint approximately 11´ long x 4´ wide Find more here - / Contact us at -

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Grinder Rex vinkl

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Height 1950 Width 1300 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 45 kw Main material Stainlees Steel Throat Diameter 180 mm Feeding System Hooper Throat Material Stainless Steel

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

ZM punch grinder

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

USI Cumberland Grinder / Granulator 28x20 50 Hp 8mm Grid 2 new dead blades 3 sharpened fly blades One new start / stop control box

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Used-refurbished machine Enterprise cutter 1700 kg/h capacity 120 L mixing chamber 6 months warranty Technical data Motor power: 5,5 + 1,1 kW Power supply: 25A Feed height: 1267 mm Dimensions: 770x1350x1330 mm Weight: 480 kg

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Тype: Seydelmann AU 200 Completely made of special stainless steel Hole plate diameter: 200 mm Hopper content: about 400 L Throughput depending on material type, speed, cutting set up to 10000 kg/ h Speeds: 2-speed working worm and 3-speed feeding worm - independent of each other Bayonet lock of the cutting set Column lifting device Protection device at the outlet Machine dimensions in сm: Width: 255,0 Depth: 170,0 Height: 174,0 Installed power: 57 kW Voltage: 380 V, 50 Hz Machine weight: 1900 Kg

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment

Cato PA160 Meat grinder Serial: 327 Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph

Magurit Model 348, fully overhauled

Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives