friction press used for sale

Standard configuration Machine ⦁ C frame ⦁ Press beam ⦁ Highly dynamic electromechanical direct drive ⦁ Distance measurement system (Y-axis) with dynamic deflection compensation ⦁ Electrical cabinet air conditioning up to an ambient temperature of 40 °C Backgauge system ⦁ 3-axis backgauge with carbon fiber gauge finger (X, R and Z axis) Clamping system ⦁ Manual TRUMPF upper tool clamp ⦁ Manual TRUMPF lower tool clamp Control ⦁ TASC6000 machine controller ⦁ Integrated TRUMPF technology data ⦁ Data transfer ⦁ Network capability ⦁ USB interface Operation ⦁ Foot switch Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Backgauge system ⦁ 6-axis backgauge system Ergonomic package ⦁ Comfort support table (front) ⦁ Comfort foot rest ⦁ Front work area illumination (LED) ⦁ Swiveling control panel ⦁ Sitting and standing aid ⦁  ...

Working width: 3450 mm Working height: 2000 mm Number of cylinders: 5 St. loading dimensions L x W x H: 3600 x 1200 x 2720 mm Hess Multipress Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stro ...

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1900/1800/H4200 mm -Weight: kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 25 to PRESS TABLE   table surface (left-right): 500 mm   table surface (front-back): 310 mm SLIDE   table surface (left-right): 250 mm   table surface (front-back): 133 mm   spigot hole diameter: 40 mm   stroke rate (max.): 155 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 0 mm   stroke max.: 60 mm   main drive power: 1.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 275 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 980 mm   space requirements -front/back-: 1000 mm   total height: 1890 mm   total weight approx.: 950 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 440 mm   thickness of bolster plate: 60 mm SLIDE   table surface (left-right): 460 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 80 mm   stroke rate (max.): 140 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 10 mm   stroke max.: 80 mm   stroke rate (min.): 70 /min   stroke rate (max.): 190 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1225 mm   space requirements -front/back-: 1355 mm   total height: 2450 mm   total weight approx.: 3100 kg ATTACHMENTS (PRESSES)   strip feeder: optional   feeder type: grip feeder   foot engagem ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 43 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm SLIDE   stroke: 90 mm   stroke rate (max.): 105 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 63 to PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 530 mm SLIDE   table surface (left-right): 460 mm   table surface (front-back): 360 mm   stroke: 110 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   stroke min.: 6 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 450 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4 kW DIMENSIONS / WEIGHTS   total weight approx.: 4500 kg

CONTROLS   electronic controls SIEMENS PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, double sided   openings in uprights: yes   number of slide actions: 1 PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 1050 mm   opening in bed (left-right): 240 mm   opening in bed (front-back): 200 mm SLIDE   table surface (left-right): 900 mm   table surface (front-back): 600 mm   spigot hole diameter: 50 mm SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke min.: 20 mm   stroke max.: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 570 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1600 mm   space requirements -front/back-: 3000 mm   ...

: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet  ...

Key data: 50 t, 2000 mm

with 3-axis CNC control (Y, X, R) With Hydr. Foot pedal (with lock) incl. 1 set of bending tools (punches and dies) 3800 kg Loading onto truck included

N. 06 INOX CRELL - MORE STEAM BRAND BABCOK WANSON

The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.

Hammelmann Hochdruckpumpenanlage HDP 202 / S 1100-20, Baujahr 2019, mit nur ca. 300 Betriebsstunden. Die Anlage befindet sich in einem sehr guten Zustand, ist voll funktionsfähig und sofort verfügbar. Technische Daten: - Hersteller: Hammelmann - Typ: HDP 202 / S 1100-20 - Baujahr: 2019 - Maschinen-Nr.: B9.02202.0267 - Betriebsstunden: ca. 300 h - Max. Betriebsdruck: 3.000 bar - Förderleistung bei 3.000 bar: 28 l/min - Alternativer Betriebspunkt: 1.000 bar / 110 l/min - Antrieb: Volvo TAD 873 VE Dieselmotor - Motorleistung: 235 kW - Abgasstufe: Stage IV / Tier 4 Final - Motordrehzahl: 2.200 U/min - Pumpendrehzahl: 2.150 U/min - Max. Flüssigkeitstemperatur: 40 °C - Sauganschluss: DN100 - Ausführung im 10-Fuß-Container Die Anlage kann mit zwei unterschiedlichen Betriebspunkten betrieben werden: 1.000 bar / 110 l/min oder 3.000 bar / 28 l/min. Original Hammelmann M ...

Gas pressure and heat generator from 2018 with approx. 1,500 operating hours. 9.5 bar, 135 KWth, 1,200 – 1,800 rpm, Compressor: Compair EK 175 NG Manufacturer: Bosch Model: CA 570 NA Type: Gas CHP Pressure and Heat Engine: MAN E0834 E302 Compressor: Compair EK 175 NG Serial Number: 100866970 Output [bar]: 9.5 Power [KWth]: 135 Year of manufacture: 2018 Operating hours: approx. 1,500 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.3 x 1.0 x 1.85

Key data: 135 t, 3100 mm, 2600 mm

Control DELEM DA 69T the machine was distributed by Knuth and manufactured in Turkey. Pressure capacity 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Projection 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm X-axis travel 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power main drive 15 kW Hydraulic tank capacity 250 l Bwebpxv Izez Hmxujpeu Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some stamps and dies are included (see pictures) Viewing possible under power.

Combustion engine: 15 hp (11 kW) Electric start with 12 V battery Belt drive Recommended material moisture: 10–18% Production Capacity: Feed pellets: 200–300 kg/h Wood pellets: 80–120 kg/h Compatible materials: sawdust, refined crushed straw, cereals Dimensions (L × W × H): 1240 × 800 × 900 mm Net weight: 330 kg Gross Weight: 420 kg Auction-ID: A1-50704-403

Double screen belt press (DSP 23/53), Fabr. Andritz, type 200/LM-LCP-K6-S7/08986/1, built in 1989, f. thin material, screen width 2,100 mm, control room, w. video surveillance system, Comment: Real estate installation Auction-ID: A1-50608-158

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Configuration: Sliding worktable, vacuum/pressure vessel, pneumatic control manifold, vacuum pump protection/control, pressure gauges, safety mesh guarding and separate operator control console Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Approximate weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-18

Model: LDP150B Type: Three-phase electric pellet mill Engine power: 4 kW Power supply: 380 V – 50 Hz – 3 phases Recommended material moisture: 10–18% Production Capacity: Feed pellets: 90–120 kg/h Wood pellets: 50–100 kg/h Indicative production: 30–50 kg/h depending on the material used Galvanized steel feed hopper with protective grid Direct Coupling Transmission Independent electrical cabinet with: Ammeter Voltmeter Start/Stop Button Emergency stop Engine Thermal Protection Dimensions (L × W × H): 800 × 450 × 670 mm Net weight: 95 kg Gross weight: 110 kg Condition: New Auction-ID: A1-50704-410

Model: LDP150B Type: Three-phase electric pellet mill Engine power: 4 kW Power supply: 380 V – 50 Hz – 3 phases Recommended material moisture: 10–18% Production Capacity: Feed pellets: 90–120 kg/h Wood pellets: 50–100 kg/h Indicative production: 30–50 kg/h depending on the material used Galvanized steel feed hopper with protective grid Direct Coupling Transmission Independent electrical cabinet with: Ammeter Voltmeter Start/Stop Button Emergency stop Engine Thermal Protection Dimensions (L × W × H): 800 × 450 × 670 mm Net weight: 95 kg Gross weight: 110 kg Condition: New Auction-ID: A1-50704-409

AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic controls, pressure gauges, heating system and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-19

Vatan Otomasyon / VEEOS U.P.H.K.P. 010 Four-Column Hydraulic Press Four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Four-column hydraulic press with hydraulic power unit, reservoir, motor, pressure gauges and control system Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,200 × 2,300 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-11

Electromechanical linear actuator from PROMESS from the assembly and testing technology sector. The system consists of a servo drive with an integrated measuring system and an external connection box. With a nominal torque of 1.05 Nm, a nominal speed of 6000 rpm and an integrated holding brake, the device is suitable for force- and displacement-controlled joining and press-fit processes in industrial assembly. The device is used and shows normal signs of use due to use. The components are complete and in good condition. Scope of delivery: 1 Promess press-fit unit with servo drive DUM6-A4-24AW6-089B 1 external connection box with M12 connectors Connection cable between unit and junction box Type: DUM6-A4-24AW6-089B Year of manufacture: 2003 Serial number: 027516 Nominal torque (MN): 1.05 Nm Maximum torque (M0): 1.14 Nm Nominal current (IN): 1.64 A Nominal speed (nN): 6000 rpm E ...

Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Rated capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic upper ram, guided moving platen, T-slotted working table, separate hydraulic power pack with reservoir, valve block and pressure gauges, safety guarding and operator control/HMI Control system: Gani Otomasyon, project no. 14276177 Working table: Approx. 880 × 800 mm Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,300 × 2,400 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-13

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, membrane pressing chamber, vacuum system, pneumatic controls, safety guarding and separate operator console Control system: Schneider Electric Harmony HMI Worktable length: Approx. 2,530 mm Condition: Used Approximate dimensions: 4,500 × 3,000 × 2,800 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-16

ul> Model: LDP150B Type: Three-phase electric pellet mill Engine power: 4 kW Power supply: 380 V – 50 Hz – 3 phases Recommended material moisture: 10–18% Production Capacity: Feed pellets: 90–120 kg/h Wood pellets: 50–100 kg/h Indicative production: 30–50 kg/h depending on the material used Galvanized steel feed hopper with protective grid Direct Coupling Transmission Independent electrical cabinet with: Ammeter Voltmeter Start/Stop Button Emergency stop Engine Thermal Protection Dimensions (L × W × H): 800 × 450 × 670 mm Net weight: 95 kg Gross weight: 110 kg Condition: New Auction-ID: A1-50704-401

Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2022 Serial number: U.P.H.K.P. 1750 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 125 A Maximum main fuse: 125 A Electrical control supplies: 380 V AC / 220 V AC / 24 V DC Configuration: Four-column construction with hydraulic power unit, guarded working area and control cabinet Control system: Gani Otomasyon, project no. 16465453 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,200 kg All descriptions are indicative only. Auction-ID: A1-50546-15

Uğursan U.P.H.K.P. 010 Four-Column Hydraulic Rubber Press Four-column hydraulic press for rubber processing and controlled compression operations. Manufacturer: Uğursan Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Rated capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Upper hydraulic ram, guided moving platen, T-slotted lower working table, hydraulic power pack with reservoir, valves and pressure gauges, safety guarding, HMI/operator controls and stack light Control system: Vatan Otomasyon / VEEOS Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-12

Hydropneumatic TOX column press, special design, equipped with TOX powerhouse type X-K 095.3030.400.61. Stable steel frame, large work table with tool holder, upper crossbeam with integrated pressing/joining unit. Suitable for joining, pressing and assembly processes in series production. Pressing unit: TOX Pressotechnik Type powerhouse: X-K 095.3030.400.61 Serial number: 811193.4 Hydropneumatic column press with work table and T-slot holder. Technical data: Operating pressure: 6 bar force (estimated, TOX standard): At Ø 95 mm and 6 bar → ≈ 42–45 kN Final force ΔV (oil volume): 376 ml Functional principle: pneumohydraulic (TOX booster) Stroke: approx. 60 mm total movement (typical 30 mm rapid stroke + 30 mm force zone) Auction-ID: A7-50729-11

Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Serial number: U.P.H.K.P. 1010 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic power unit, heated upper and lower platens, HMI operator control, safety guarding and hydraulic oil system Control system: Gani Otomasyon, project no. 14276033 Hydraulic oil: Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-14

Vatan Otomasyon U.P.H.K.P. 010 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Press capacity: 10 t Electrical supply: 380 V Configuration: Upper moving platen, lower tool table, hydraulic power unit, pressure gauges, safety guarding, HMI/operator control panel and stack signal light Approximate tool/table width: 600 mm Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Approximate weight: 1,500 kg All descriptions are indicative only. Auction-ID: A1-50546-10

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17

AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-019 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, pressure vessel, pneumatic/vacuum system, heated upper pressing section, operator control panel, emergency stops and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-29

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002M Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Hydraulic pressure: Up to 500 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic valve system, heated upper press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,920 kg All descriptions are indicative only. Auction-ID: A1-50546-23

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2104-014 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic control system, vacuum system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,385 kg All descriptions are indicative only. Auction-ID: A1-50546-26

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-016 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-24

ESER E 925 Veneer Cutting Press Heavy-duty swing-arm cutting press for die-cutting veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Year: 2017 Serial number: KKP 03 Power: 1.5 kW Electrical supply: 220–380 V Configuration: Manually adjustable upper cutting head, cutting table and separate electrical control cabinet Control cabinet: Marian Galád, type KKP 01, 2018, 400/230 V, 16 A, 50 Hz, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-32

Double screen belt press DSE 23/51, manufacturer Andritz, type 200/RM-LCP-107-67/08968/1, year of construction 1989, for thin material, screen width 2,100 mm Auction-ID: A1-50608-156

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

Binks 83Z-211-CE Pressure Feed Paint Tank & Spray System Pneumatic pressure-fed coating system comprising a Binks pressure tank, regulators, pressure gauge, hoses, DeVilbiss spray gun and auxiliary spray cup. Manufacturer: Binks / Carlisle Fluid Technologies Model: 83Z-211-CE Power: Pneumatic Tank capacity: 9.5 L Maximum operating pressure: 5.5 bar Safety valve: 5.5 bar Fluid group: 1 Operating temperature: 0–50 °C Hazardous-area classification: Suitable for Zone 1; Ex II 2 G X Included equipment: Pressure tank, regulators, gauge, hoses, DeVilbiss spray gun and auxiliary spray cup Condition: Used Approximate dimensions: 450 × 450 × 700 mm Approximate weight: 25 kg All descriptions are indicative only. Auction-ID: A1-50546-66

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane and foil onto panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum pump/system, pressure vessel, pneumatic controls, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-25

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating decorative films and similar materials onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Industrial sliding worktable, hydraulic/vacuum system, pressure vessel, heated upper pressing section, operator control panel with HMI, emergency stops and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-30

Uğursan HKP 200 Hydraulic Heated Rubber Press Hydraulic rubber press for heated compression moulding and pressing of rubber products, with large heated upper and lower platens, hydraulic power unit, touchscreen operator control and safety light barriers. Manufacturer: Uğursan Model: HKP 200 Year: 2022 Serial number: UP.HKP.3028 Pressing force: 200 t Operating pressure: 210 bar Total power: 51 kW Motor power: 15 kW Resistance heating: 36 kW Electrical supply: 380 V Configuration: Four-column construction, heated upper and lower platens, hydraulic power unit, touchscreen control, automatic heating controls and safety light barriers Condition: Used Approximate dimensions: 2,300 × 1,800 × 3,900 mm Approximate weight: 13,600 kg All descriptions are indicative only. Auction-ID: A1-50546-50

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2101-01 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, hydraulic power unit, pneumatic/vacuum controls, pressure vessel, heated upper pressing section, operator control panel and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-28

Technical data Manufacturer: INGERSOLL-RAND Type: C80MX2-2RH Year of Make: 1996 Serial No.: V-4716 Power: 350 kW Speed: 2,975 rpm Pressure: 800 kPa Control: Atlas Copco, Elektronikon Cubicle: Atlas Copco, Type 1900 0619 80, Serial No. AIF 108951 Installation: 2006 Configuration Version: Turbo compressor / control air compressor with separate control cabinet and connected piping technology. Auction-ID: A1-50608-40

Double screen belt press (DSP 23/52), Fabr. Andritz, type 200/LM-LCP-K6-S7/08986/1, built in 1989, for thin material, screen width 2,100 mm, control room, with video surveillance system, Comment: Real estate installation Auction-ID: A1-50608-157

Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21

ESER E 925 Veneer Cutting Press Used swing-arm veneer cutting and punching press for processing veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Configuration: Swing-arm cutting head, cutting table and separate electrical control cabinet Electrical cabinet: Marian Galád, type KKP 02, production no. 2062018, 2018 Electrical specifications: 400/230 V, three-phase, 50 Hz, 16 A, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Approximate weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-33

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27