fresadora universal used for sale

This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.

This 3-axis Auerbach FUW 625 was manufactured in 1997. It features a travel of 625 mm in the X-axis, 525 mm in the Y-axis, and 455 mm in the Z-axis. The machine is equipped with a 20-slot tool changer and operates at spindle speeds ranging from 25 to 5,000 RPM. If you are looking to get high-quality machining capabilities, consider the Auerbach FUW 625 vertical machining centre we have for sale. Contact us for further details.

Used Universal Dishwashers Decker DishwasherManufacturer : DeckerType : Dishwasher TT3920DECDDyear of construction: 2019For bakeries and butchers/butchersDetails see pictures

Stephan UM44-S Universal Machine two speeds, 1410 + 2820 rpm + engine brake! Membrane keyboard with impulse switch with knife insert Machine tiltable for removing the processed medium Machine is in good condition and runs neatly and smoothly at both speeds, but should be thoroughly cleaned before use Video about test run available

x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: HSK 63 Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: total power requirement: 43 kVA weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Universal machining centre manufactured in 2014. This 5 axis HERMLE C 400 U features a high-pressure IKZ, laser measuring system, and a 35-tool magazine. With a spindle speed of 18,000 rpm and a net weight of 10,500 kg, it offers robust capabilities for various machining tasks. Consider the opportunity to buy this HERMLE C 400 U universal machining centre. Contact us for further details.

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-27

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details.

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-29

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

machine ready for transport and to be assessed on viewing day. Machine clamp not included Auction-ID: A1-44905-105

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-30

swivel table, size: 255 x 600 mm Table height adjustment by hand approx.: 400 mm Table transverse adjustment by hand approx.: 150 mm Automatic longitudinal adjustment approx.: 260 mm Drive motor: 380 V, approx. 2.2 kW Space requirement: 1000 x 950 x 1520 mm

Auction-ID: A1-44905-179

: gebraucht : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 32800 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.100,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle pro ...

Inv. Num. : 9005 Type: BUC 63 A Producer: TOS Created: 1983 Parameters: Maximum grinding length: 2000 mm Grinding diameter: 630 mm Maximum weight of the workpiece: 2500 kg Maximum length of the workpiece: 3500 mm Machine weight: 5000 kg

hobart UXSBÄKO 10A Universal Dishwasher GastroProduct description:usedBakery conditionManufacturer: HobartModel: UXSBÄKO 10A Dishwasher, crate washer, dishes, …the all-round machine with great performance for boxes, trays, dishes, jugs, etc. Power supply: 400V, 50Hz, 15.6kW, 24.4A 3N PHDetails see pictures

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Hobart UX 30 ESB Universal Dishwasher Gastro Product description: - used - bakery condition - manufacturer: Hobart - model: UX 30 ESB - universal dishwasher, crate washer, dishes, … - the all-round machine with great performance for boxes, trays, dishes, jugs, etc. - Power supply: - 400 V, 50 Hz, 13.2 kW, 3N PH - Exterior dimensions W.: 77 cm, D.: 84 cm, H.: 195 cm Not tested untested See pictures for details.

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

Universal Tool Grinding Machine Two grinding wheels: diamond and corundum wheel Individually adjustable supports Finely adjustable guides and angle adjustments Electric motor with two-stage speed control (switching stages I / II) Stable cast iron body for low-vibration running High grinding accuracy Technical data (approx.): • Grinding wheels Ø: 125–150 mm • Motor power: 0.55 kW • Speed: 1,400 / 2,800 rpm • Electrical connection: 380 V three-phase current • Dimensions (L×W×H): 700 × 500 × 900 mm • Weight: approx. 90 kg Special features: • Two grinding wheels (diamond / corundum) • Stable angle adjustment devices • Solid cast iron housing with stable frame • Ideal for toolmaking, maintenance and precision workshops Auction-ID: 03U-EV4-5

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Inv. Num. : 8008 Type: DMG DMU 50 eco Producer: Deckel Maho Gildemeister Created: 2010 Parameters: Control system: Siemens Sinumerick 810D Switch-on hours: 56933 h Operating hours: 25670 h Number of axles: 5 pieces Number of stacking positions: 16 Maximum spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 450 mm Travel Z axis: 400 mm Equipment: ShopMill

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes -Weight: 12 kg

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA02 -Shaft: Ø 24 mm -Square: 15 x 15 mm -Dimensions: see photos -Number: 7x universal joints present - Price: per piece -Overall dimensions: 135/57/H46 mm -Weight: 0.8 kg/pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA01 -Shaft: Ø 36 mm -Square: 19 x 19 mm -Dimensions: see photos -Number: 5x universal joints available -Price: per piece -Overall dimensions: 165/70/H62 mm -Weight: 1.7 kg/pc.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA03 -Shaft: Ø 30 mm -Square: 15 x 15 mm -Measurements: see photos -Quantity: 4x universal joint available -Price per piece -Dimensions: 276/55 / H46 mm -Weight: 1.5 kg / pc.

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: AMF, universal clamping pad set in wooden box -Design/Dimensions: see photos -Quantity: 3x set available -Price: per set -Dimensions box: 280/160/H40 mm -Total weight: 7.0 kg/piece

Adjustable traverse, crane traverse, hall crane, crane hook traverse, load traverse, heavy-duty traverse, core for crane traverse -Cardan joint: for crane traverse -Art.No.: 1045 2761 G-12-02-02 -Hole: Ø 60 mm, hole spacing 220 mm -Dimensions: see photos -Quantity: 4 pieces available -Price: per piece -Transport dimensions: 350/140/H140 mm -Weight: 16.7 kg/piece

Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 -Elbe Art.No.: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 330 mm -Weight: 2.7 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Type: Ferroflux magnetic crack inspection device Brand / Model: TIEDE UNIVERSAL 12 GP NF Power: 35 A Included: Darkening chamber for visual inspection Condition: Used (details not specified) Auction-ID: A7-45255-3

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T