frequency used for sale

Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Power: 500 kVA / 400 kW diesel engine / type / Nr.: / D 2840 LE / 46481330014101 Cylinder: 10 / V Cooling: 2-circuit cooling system Generator / type / Nr.: AEM / SE400SA4 / 309600073 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 min-1 Type: 20' HC Container generating set Tank: approx. 850 litres (+ connextion for external diesel supply) Switchgear / Starter: automatic switchgear SEG Battery voltage: 24 V Generator switch: No Power switch: No Accessories: No Dimensions (L X W X H): 6006 x 2440 x 2890 mm

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Power: 2000 kVA / 1600 kW Diesel engine: MTU 16V 396 TB34D Cylinder: V 16 Cooling: liquid-cooled Builder: A.v.Kaick DIDBN 130/125 h/4 Voltage: 400 / 230 V or 10 kV Frequency: 50 Hz Speed: 1500 min-1 type: 2pcs 40´ containers Tank: 4000 litres Switchgear / Starter device: Yes Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic: Yes Dimensions (L X W X H): approximately 12020 x 2500 x 5800 mm Weight: approx. 30 t Year of constr.: 1996 (aggregate)

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Continuous power: 310 kW / 248 kW Diesel engine: Iveco 8281 SI 15, code: 939520 Cylinders: 8 Cooling: Liquid-cooled Builder: A. v. Kaick DKB 80/400-4TS, no.: 5384135 Voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20' container Accessories: tank: 1000 l Switchgear / Starter: automatic switchgear, Kuhse KEA 071 Battery voltage / capacity: 24 V Dimensions (L X W X H): 150 x 2480 x 2380mm Weight: 9 tons

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

Power: 400 V (50 Hz): 650 kVA / 520 kW or 440 V (60 Hz): 750 kVA / kW 600 Possible total power when interconnected: 2600 kVA / 2080 kW or kVA 3000 / 2400 kW Diesel engine / type: MAN 2842 LE 211 Cylinder: V 12 Cooling: liquid-cooled Generator / type / Nr.: Marelli, MJB 355 MA/5 Voltage: 231 / 400 V up to 10 kV Frequency: 50 / 60 Hz Speed: 1500 / 1800 Type: in 20´ container Tank: 800 LTR. Switchgear / Starter: automatic switchgear Battery voltage / capacity: 24 V Generator switch: Yes Automatic: Symap Dimensions (L X W X H): 6058 x 2438 x 2591

Power: 690 kW / 552 kW Four-stroke diesel engine / type / Nr: Deutz MWM TBD 234 V16 No. 234.16.01156 Cylinders: V16 Cooling: E cooler Generator / type / Nr.: Marelli MX 400 SCI 4 No. MS-1003 Voltage: 400V Frequency: 50 HZ Speed: 1500 rpm Type: Complete unit on base frame in 40' container Tank: 1500 LTR. Switchgear / Starter: Automatic switchgear / electric start Battery voltage / capacity: 24V Generator switch: Yes Power switch: No Auto: Yes (Symap ECG), mains parallel operation Dimensions (L X W X H): 40' container Weight: approx. 18 t

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

Power: 250 kVA / 200 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / 101801/38 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AEG / SJRJ 80e/4 d / 806129 Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 rpm Design: soundproofed canopy Tank: approx. 720 l Switchgear / Starter: Automatic with no brake return / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: DEIF, type BGC 108 Dimensions (L X W X H): Approx. 4000 x 2500 x 2500 mm Year of manufacure: 1972, built into canopy 2016

Power: 450kVA / 360 KW Diesel engine (four-stroke) / type / no.: IVECO 8281 SRI 2709 / 509102 Cylinders: 8 V Cooling: water cooled Alternator / type / no.: Leroy Somer 47.1 L9 C6/4 / FJ092825/01 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

Power: 450 kVA / 320 KW Diesel engine (four-stroke) / type / Nr.: IVECO Aifo / 8281 SRi 27 / 831544 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: Mecc Alte / ECO 40-S2/4 / 0000949465 Voltage: 400/231V Frequency: 50 Hz Speed: 1500/min-1 Type: 20' soundproofed container Tank: 400 ltr. Day tank + external diesel supply option / Starter: Kuhse KEA 101 SPL Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic. Yes Accessories: -. Dimensions (L X W X H): Approx. 6058 x 2438 x 2591 mm Weight: Approximately 7800 kg (excluding diesel)

Cat.-No. 15 00059 new Measurements and Weight: Length: 1730 mm Width: 570 mm Height: 1340mm Weight: 300 kg Characteristics of the drive: Spur gear transmission: - Transmission 38 /min Screw rotational speed (output speed) 12-50 /min Electrical Data: - Power 5,5 kW - Rotational speed 1450 /min - Current consumption ~ 11A - Voltage 3/PE/400 V - Frequency 50 Hz Machine power: max. 80 kg/h of purifies rape seed Operating Instructions available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale Visit our Web-Site: www.eurolux-ag.com

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

1250 / 250 mm, case closed steel construction, with 2 x roller pacts arranged horizontally. each pair with kraftschlüssigem stock package, left and right,. Vibration damping and spherical roller bearings, 4 x built-in 1.Klassigem centrifugal casting, grinding rollers dynamically balanced grinding rollers - Riffel,., Roll diameter: 250 mm Roll length: 1250 mm pneumatic - mechanical roller contact pressure,. electronically controlled, automatic input and disengagement of the Milling and feed rolls, incl. drive pulleys for flat or v-belt,. Feed roller module with frequency-controlled feed rollers - speed machine is new, never used.

Mercury vapor lights to illuminate large halls Manufacturer: May Type: HQ 10/250 Technical data: Power: 250 Watts Voltage: 230 Volt Frequency: 50 Hz Lamps are waste. Therefore, these are inexpensive to make. They are fully functional and in very good condition!

Technical data Cup filling and sealing machine Easyline BF 4000: System: 2-track round runners Execution: Pneumatic Theoretical performance: 40 cycles / min Output quantity: approx. 2,500 3,000 cups per hour Efficiency: 95% for proper packaging and a head space of approx. 12 mm Standard system: - movable piston valve filler product container: stainless steel with approx. 40 L capacity Filling volume: e.g. 100 - 500 ml (adjustable by an initiator) Cleaning: Manual Energy data: Control: Siemens S7 - 1200 operation: 4 inch Siemens Touchpanel colour display Panel: stainless steel Type of protection up to IP 66 Power consumption: approx. 1,8 kW and maximum 10A. Power supply: 400 V Frequency: 50 Hz Air requirement: approx. 8-10 nm ³/h Operating pressure: 6 bar Machine frame / execution: base frame made of stainless steel 1.4301. Suitable for wet room.  ...

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

Compressed air screw compressor oel-free Atlas Copco ZT 90 VSD FF 90 kW, 8.75 bar, 15.50 m3/min Comment: oel-free, air-cooled, frequency-controlled. Delivery volume 4.7 - 15.5 m3/min. With integrated MD dryer.

Power: 1050 kVA / 840 kW Diesel engine / type / Nr: MTU / 12V 493 / 820 3309 Cylinder: V 12 Cooling: Water-cooled, E-cooler Generator / type / Nr.: Garbe Lahmeyer / AT 400 LB 9 / 9600.617 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 min-1 Type: 40' HC Container Tank: 2700 ltr Switchgear / Starter: yes / electric Battery voltage / capacity: 24 V Generator switch: yes Power switch: no Automatic: yes SYMAP Accessories: - Dimensions (L X W X H): approx. 12400 x 2480 x 2880 mm Weight: 22.000 kg Date of manufacture: Generating set: 1975 / Built into Container: 2017

GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

FOR SALE ALFA LAVAL ECOSTREAM OILY WATER CLEANING COMPLETE SYSTEM TO WHOM IT MAY CONCERN; WE VE COMPLETE SYSTEM ALFA LAVAL ECOSTREAM OILY WATER CLEANING SYSTEM AT OUR STOCK SYSTEM RUNNING HOUR IS ONLY 3HRS . IT IS BRAND NEW . , EPC 50, 15 PPM Alarm and all accessories PLS FIND DETAILS ON BELOW ALFA LAVAL ECOSTREAM ART-NO. 585420-01 AL R SA 52658 MADE IN ITALY 60 HZ FREQUENCY 440V SEPARATOR BRPX 307 TGD-71 ELECTRICAL BOOSTER EH-W25 L1500 YOB 2014 EX STOCK READY TO TRANSPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH SU. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Demonstration device. The system is designed to work in a closed circuit. It has two separate chambers / phases, the first chemical solution and the second with soapy water. The device is designed to minimize the effort of mixing of substances. A micro-processor controlled system allows easy operation of the unit with a user interface. Inside / work Maß 2000 B x 1500 T x 1500 H Outer dimensions 2800 B x 1600 T x 1800 H Operated electrically Voltage 380 V Power 9 kW Frequency 50-60 Hz Water pressure 60 / 160-200 bar Chemical pressure up to 15 bar Phase I chemistry circuit closed heated chemical tank Phase II water / tap water Capacity 7-10L/min Heating capacity 30 80 ° C Tank capacity 200 L Control manual / automatic Remaining warranty up to 12 months Continuously exhibition equipment on sale

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Leading Jet mixer Manufacturer: Ystral Type: Y 11,000 L / TFW - 4 D Year of construction: 2003 Technical data: Power: 11 kW / 15 HP Revolutions: 1,465 U/min Voltage: 230 / 400 V Frequency: 50 Hz Weight: 150 kg In very good condition!

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

industrial spare monitor 12.1 "TFT monitor Fits lid machines with dialog 11 control high quality anti-reflective glass Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Betriebstemeratur-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, Kontrastveraeltnis, car customization Phase position, clock, language install, reset Accessories: Achschlusskabel, power supply 24 month warranty! More monitors, new and used on request!

Replacement TFT monitor for MAHO machines with control of Philips CNC 432. Suitable for MAHO CNC 432/10 Philips control machines. Front panel aluminum black powder coated High quality anti-reflective glass Dimensions 400 x 308 mm front panel Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixel brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Operating temperature-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, contrast ratio, auto adjustment Install phase position, clock, language, reset Included accessories: power adapter, Achschlusskabel 15-pol. D-Sub 24 months warranty!

Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...