We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Mixer with double rotation internal auger (conical-concentric). The BONFIGLIOLI gearmotor unit that turns the helical reel consists of: - Three-phase asynchronous motor (IP-55 protection degree), with nominal electrical power Pn = 0.37kW, and absorbed current (at the frequency of 50Hz which is in force in Europe), equal to: - In =1.85 Ampere if powered at 230Vac line voltage - In = 1.07A, if powered at the star voltage of 400Vac (as in the LdF factory) If, for example, it were used in the USA, where the frequency is equal to 60Hz and the power supply voltage is 460Vac, the power that the motor can develop is greater (Pn=0.45kW) and the absorbed current is In=1, 09Ampere.
used
Machine description: Longitudinal travel X = mm. 10.000 Vertical stroke Y = mm. 2.000 Cross travel Z = mm. 600 Relocation additional for W axis 600 mm. (continuous) Power supply voltage and frequency: 400 V. - 50 Hz. 1) Vertical tool magazine with 600 places HSKA63 - DIN 69893. 2) Device for washing the tool cone operated by high pressure coolant. 3) Tilting head unit - 90 ° A Axis tilting cradle - C Axis positions n. 360,000 4) 4-sided drum with a side of 1100 mm., - Spindle speed: 20,000 rpm. HSK 63A; - Spindle bearings a variable preload; - Equipment for automatic tool balancing control; 5) Ecological-accident prevention protection of the armored type machine for high speed machining; 6) Refrigerating unit for conditioning the spindle cartridge; 7) Spindle with provision for the supply of coolant through the center of the tool; 8) Air-conditioned electrical unit; 9) Scrap ...
used
We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...
used
Milk/whey cream separator. ALFA-LAVAL MRPX 418 TGV. Capacity 25000 l/u. Skid mounted. With 2 bowls, one for milk and one fow whey separation. Drive converted for operation with frequency conroller. Including OWM, backpressure valve end flowmeter. Controlpanel with Siemens PLC and Mitsubishi frequency controller. Back-up of PLC program included. Excellent condition, recently overhauled.
used
Description: Input DC Max input voltage: 600 V MPPT Range: 100...550 V Max input current: 22 A Overvoltage cat: 2 Output AC Nominal power: 4.6kVAc Power factor (cos phi): 0.98 ind… 0.98 cap Voltage: 230 V Max current: 22 A Frequency: 50 Hz Overvoltage cat: 3 max. temperature: 60 °C, Approx. Onsite Dimension. (l x w x h): 545 x 290 x 185 mm, efficiency: 97%, insulation class: integrated DC insulation switch according to VDE 0100-712, frequency: 5 kHz, weight approx.: 15 kg
used
Description: Input DC Max input voltage: 600 V MPPT Range: 100...550 V Max input current: 22 A Overvoltage cat: 2 Output AC Nominal power: 4.6kVAc Power factor (cos phi): 0.98 ind… 0.98 cap Voltage: 230 V Max current: 22 A Frequency: 50 Hz Overvoltage cat: 3 max. temperature: 60 °C, Approx. Onsite Dimension. (l x w x h): 545 x 290 x 185 mm, efficiency: 97%, insulation class: integrated DC insulation switch according to VDE 0100-712, frequency: 5 kHz, weight approx.: 15 kg
used
Description: Max Configurable Power (Watts) 32.0kWatts / 40.0kVA Output Voltage Note Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage Output Voltage Distortion Less than 5 % Output Frequency (sync to mains) 50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised, 50/60 Hz +/- 5 % Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised Input Input frequency 45 - 65 Hz Input voltage range for main operations 323 - 437 (380 V) Adjustable, 340 - 460 (400 V) Adjustable, 340 - 477, 357 - 477 (415 V) AdjustableV Batteries & Runtime Battery type Lead-acid battery Nominal Battery Voltage +/- 192 V (split battery referenced to neutral) Environmental Operating Temperature 0 - 35 °C Operating Relative Humidity 0 - 95 % Operating Elevation 0 - 3048meters  , Approx. Onsite Dimension. (l x w x h): 1,300 x 500 x 950 mm, weight approx.: 600 kg
used
Description: Max Configurable Power (Watts) 24.0kWatts / ,30.0kVA Output Voltage Note Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage Output Voltage Distortion Less than 5 % Output Frequency (sync to mains) 50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised, 50/60 Hz +/- 5 % Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised Other Output Voltages 380 ,V, 415 ,V Waveform type Sine wave Overload Operation 60 seconds at 120% and 30 seconds at 145% Maximum Output Current 65 Output Voltage THD <, 3% linear load and <, 5% non-linear load Output Voltage Tolerance +/- 2% static and 100% load step INPUT Input frequency 45 - 65 Hz Input voltage range for main operations 323 - 437 (380 V) Adjustable, 340 - 460 (400 V) Adjustable, 340 - 477, 357 - 477 (415 V) AdjustableV Input Total Harmonic Distortion Less than 5 % for full load ...
used
ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...
used
Description: UPS system Serial number 734E14005 Main input-output voltage: 208 V 3 phases / 480 V 3 phases / 600 V 3 phases Rated power in W: 24000 W Rated power in Va: 30000 VA Input-output frequencies: 50 / 50 Hz Output connector type hard wire 5-wire (3P + N + E): 1 Battery type: VRLA Battery life: 5 to 10 years Network frequency: 60 Hz +/- 3 Hz Number of input connectors: 1 hard wire 5-wire (3P + N + E) Input voltage limits: 166 to 239 V Maximum input current: 56 A Input-output harmonic distortion: less than 3 % for full load Input protection type: 3-pole circuit breaker Load power factor: 0.8 Input power factor at full load: 0.98 Output frequency: 60 Hz sync to mains / 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised Wave type: Sine wave Output voltage tolerance: +/- 1% static and +/- 5% at 100% load step Output overload operation: 60 seconds at 130% and 30 seconds at 145% Bypass ty ...
used
Description: UPS system Serial number 734J2200A Main input-output voltage: 208 V 3 phases / 480 V 3 phases / 600 V 3 phases Rated power in W: 24000 W Rated power in Va: 30000 VA Input-output frequencies: 50 / 50 Hz Output connector type hard wire 5-wire (3P + N + E): 1 Battery type: VRLA Battery life: 5 to 10 years Network frequency: 60 Hz +/- 3 Hz Number of input connectors: 1 hard wire 5-wire (3P + N + E) Input voltage limits: 166 to 239 V Maximum input current: 56 A Input-output harmonic distortion: less than 3 % for full load Input protection type: 3-pole circuit breaker Load power factor: 0.8 Input power factor at full load: 0.98 Output frequency: 60 Hz sync to mains / 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised Wave type: Sine wave Output voltage tolerance: +/- 1% static and +/- 5% at 100% load step Output overload operation: 60 seconds at 130% and 30 seconds at 145% Bypass ty ...
used
Key data: 5 A, 80 V, 400 V
- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V ...
used
Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection ...
used
Description: Power: 140kva Rated standby power: 150 kva Voltage: 233/400v Rated Current: 202,1a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Machenical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 27 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274E Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:140kva Controller - ComAp Model Intelilite AMF 25 ...
used
Description: Power: 100kva Rated standby power: 110 kva Voltage: 233/400v Rated Current: 144,3a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 19 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:100kva Controller - ComAp Model Intelilite AMF 25 c ...
used
Description: Power: 140kva Rated standby power: 150 kva Voltage: 233/400v Rated Current: 202,1a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Machenical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 27 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274E Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:140kva Controller - ComAp Model Intelilite AMF 25 ...
used
Description: IPower: 50kva Voltage: 233/400v Rated Current: 72,2a Max. sound level: ≤78 Engine : Model: N4105ZDS Air Intake system: Turbocharged Nº cylinders: 4 Raded speed: 1500 r/min Rated Power: 56 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 198 m3/min Gas temp: ≤600 Max. back pressure: 3kpa Air Intake System: Intakepipe diameter: 60 mm Fuel System: Load prime power: 10 l/h Fuel tank capacity: 120 l Lubrication System: Total system oil capacity 13 l Oil consumption: ≤2,4 g/kw.h Min oil pressure: 1,5 MPa Cooling System: total coolant capacity: 18,5 l Thermostat 75-95ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU224D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power: 50kva Controller - ComAp Model Intelilite AMF 25 comap Protective Functions : oil pressure ...
used
Description: Power: 50kva Voltage: 233/400v Rated Current: 72,2a Max. sound level: ≤78 Engine: Model: N4105ZDS Air Intake system: Turbocharged Nº cylinders: 4 rated speed: 1500 r/min Rated Power: 56 kw Intellite governor type: Mechanical Start Motor: 24v exhaust system: exhaust gas flow 198 m3/min Gas temp: ≤600 Max. back pressure: 3kpa Air Intake System: Intakepipe diameter: 60 mm Fuel System: Load prime power: 10 l/h Fuel tank capacity: 120 l Lubrication System: Total system oil capacity 13 l Oil consumption: ≤2,4 g/kw.h Min oil pressure: 1,5 MPa Cooling System: total coolant capacity: 18,5 l Thermostat 75-95ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU224D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power: 50kva Controller - ComAp Model Intelilite AMF 25 comap Protective Functions: oil pressure HIgh ...
used
Sealing machine for the production of sealed and pre-cut bags wound on cardboard cores. With a mixed seal (English cover) Automatic FIFE web guide Photocell for printed material Material width 600-2000mm Thickness from 2x8 my to 4x80 my Maximum roll diameter 380/400mm Roll width 600-2000mm Warranty: No warranty Operational: In operation Voltage 400V three-phase Frequency 50Hz Installed power 14Kw Materials: LDPE Condition: In production Machine dimension: (length 5580mm /width 4208mm /height 3730mm) Welding width: 2000mm Plastic type bag: bottom seal bag / Soudure mixte Final positioning of the bags: Roll Bag length: Max: No limit ; Min: 200 mm Bag width: Max: 2000 mm; Min: 600 mm Film thickness: Max: 4 x 80 microns; Min: 2 x 8 microns Bottom gusseting: NO Side gusseting: NO Production: Meters/min: 130 Unwinder: Type: Standard Mother roll width: 2000 ...
used
Vibratory feeder, vibratory feeder, vibratory feeder, feeder, automatic feeder hopper, spiral feeder -Handover: in current condition as seen -Condition/add-on parts: see photos -Manufacturer: Oku automatic, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm -Shelve conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg
used
Description: IPower: 50kva Voltage: 233/400v Rated Current: 72,2a Max. sound level: ≤78 Engine : Model: N4105ZDS Air Intake system: Turbocharged Nº cylinders: 4 Raded speed: 1500 r/min Rated Power: 56 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 198 m3/min Gas temp: ≤600 Max. back pressure: 3kpa Air Intake System: Intakepipe diameter: 60 mm Fuel System: Load prime power: 10 l/h Fuel tank capacity: 120 l Lubrication System: Total system oil capacity 13 l Oil consumption: ≤2,4 g/kw.h Min oil pressure: 1,5 MPa Cooling System: total coolant capacity: 18,5 l Thermostat 75-95ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU224D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power: 50kva Controller - ComAp Model Intelilite AMF 25 comap Protective Functions : oil pressure ...
used
Description: Power: 100kva Rated standby power: 110 kva Voltage: 233/400v Rated Current: 144,3a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 19 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:100kva Controller - ComAp Model Intelilite AMF 25 c ...
used
Description: Power: 50kva Voltage: 233/400v Rated Current: 72,2a Max. sound level: ≤78 Engine: Model: N4105ZDS Air Intake system: Turbocharged Nº cylinders: 4 Raded speed: 1500 r/min Rated Power: 56 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 198 m3/min Gas temp: ≤600 Max. back pressure: 3kpa Air Intake System: Intakepipe diameter: 60 mm Fuel System: Load prime power: 10 l/h Fuel tank capacity: 120 l Lubrication System: Total system oil capacity 13 l Oil consumption: ≤2,4 g/kw.h Min oil pressure: 1,5 MPa Cooling System: total coolant capacity: 18,5 l Thermostat 75-95ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU224D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power: 50kva Controller - ComAp Model Intelilite AMF 25 comap Protective Functions: oil pressure HIg ...
used
Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg
used
Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2022). The format on the machine is 250 gram, 100 x 75 x 35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil on ...
used
Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 500 gram, 125 x 75 x ±56 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 70 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...
used
Description: Power: 100kva Rated standby power: 110 kva Voltage: 233/400v Rated Current: 144,3a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 19 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:100kva Controller - ComAp Model Intelilite AMF 25 ...
used
Description: IPower: 50kva Voltage: 233/400v Rated Current: 72,2a Max. sound level: ≤78 Engine : Model: N4105ZDS Air Intake system: Turbocharged Nº cylinders: 4 Raded speed: 1500 r/min Rated Power: 56 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 198 m3/min Gas temp: ≤600 Max. back pressure: 3kpa Air Intake System: Intakepipe diameter: 60 mm Fuel System: Load prime power: 10 l/h Fuel tank capacity: 120 l Lubrication System: Total system oil capacity 13 l Oil consumption: ≤2,4 g/kw.h Min oil pressure: 1,5 MPa Cooling System: total coolant capacity: 18,5 l Thermostat 75-95ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU224D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power: 50kva Controller - ComAp Model Intelilite AMF 25 comap Protective Functions : oil pressure ...
used
turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...
new
internal diameter:250 mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:250 (selbstschließend), 1 Satz harte Backen, 1 Satz weiche Backen, 1 Satz Innen mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:RPM 28.000, diam. 60 mm. Min. diam. cap. 25 mm. x Bohrung 50 mm, Max. diam. cap. 100 mm. x Bohrung 115 mm . internal grinding spindle: ...
new
internal diameter:300 mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:350 (selbst zentrierend) mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:auf Anfrage internal grinding spindle:auf Anfrage fixed steady rests:10-100 mm, 100-170 mm PERFORMANCE AND PRECISION DEGREE Robbi grinding machines are according to the international precision normes ...
used
Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm, model NLZ427B, are designed for cutting sheet metal with a thickness of up to 20 mm and a tensile strength of S 500 MPa. Scissors can be used in the procurement workshops of metal structures, machine-building enterprises, repair and other plants, when used in climatic zones with a temperate and cold climate version UHL, dry and humid tropical - version O; placement category 4 according to GOST 15150 - 69 The lower value of the air temperature must be at least +5 0С. Designed for cutting metal up to 20mm thick 1. Maximum cutting force, kN 1000 2. The largest dimensions of the metal being cut with temporary 3. resistance
used
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
used
Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...
used
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: link drive feedstock transport direction: left to right SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 80 /min COUNTER RAM nominal force: 22 to stroke: 8 mm V-RING nominal force: 25 to stroke: 15 mm TOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 220 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm &nbs ...
used
Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...
used
We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB
used
Hot counter/ hot display case with 5 bays 650x700 (GN2/1) and 2 glass doors front and rear for handling and removal. The display case is in a very good, cleaned and functional condition. Undertable also available on request, can also be used as Bain-Marie. Technical data: -External size: 980x870x1020mm. -Indoor size: 5x650x700mm. -elek. Voltage: 230V -Frequency: 50 Hz -elek. Power: 3.5kW. -Serial Number: 100010826
used
Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
used
Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops ...
used
75.0 kW, max. 10.0 bar, 14.02 m3/min. With frequency inverter. Volume flow 14.02 m3/min at 7 bar.
used
75,0 kW, max. 10,0 bar, 14,02 m3/min. With frequency inverter. Volume flow 14,02 m3/min at 7 bar.
used
90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.
used
90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.
used
75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.
used
75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.
used
Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
75.0 kW, max. 8.50 bar, 12.28 m3/min. With built-in frequency inverter. Volume flow 2.89 - 12.28 m3 rpm.
used
75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.
used
45.0 kW, max. 10.0 bar, 6.10 m3/min. With frequency inverter. Volume flow 1.5 - 6.1 m3 rpm. New level in 2008 at 51000 operating hours.