frequency inverter used for sale

Description: -Edge height: 13 - 50 mm -Max. solid wood cross-section: 15x45 mm -Min panel length: 140 mm -Min panel width (with 150 mm length): 85 mm -Min panel width (with length 250 mm): 50 mm -Three-phase line -Voltage: 380 V -A max: 22 -Frequency: 50 Hz -Max inverter frequency: 200 Hz -Control voltage: 110 V -Motor power: 15 Kw - 53 A - 11 Nl/cycle edge thickness: 0.5 - 15 mm, workpiece thickness: 10 - 45 mm, workpiece overhang: 25 mm, feed: 10 - 20 m/min, Approx. Onsite Dimension. (l x w x h): 6,300 x 1,450 x 1,450 mm, weight approx.: 2,550 kg

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...

75.0 kW, max. 10.0 bar, 14.02 m3/min. With frequency inverter. Volume flow 14.02 m3/min at 7 bar.

75,0 kW, max. 10,0 bar, 14,02 m3/min. With frequency inverter. Volume flow 14,02 m3/min at 7 bar.

90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.

75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.

75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.

75.0 kW, max. 8.50 bar, 12.28 m3/min. With built-in frequency inverter. Volume flow 2.89 - 12.28 m3 rpm.

75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.

45.0 kW, max. 10.0 bar, 6.10 m3/min. With frequency inverter. Volume flow 1.5 - 6.1 m3 rpm. New level in 2008 at 51000 operating hours.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

50,0 kW, max. 13,0 bar, 7,90 m3/min. With built-in frequency inverter. Volume flow 5,93 - 7,9 m3/min.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

Air Screw Compressor Atlas Copco GA 55 VSD 55 kW, max. 13 bar, 9.72 m3/min. With built-in frequency inverter. Volume flow 1.6 - 9.72 m3 rpm.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

Air screw compressor Atlas Copco oel-free ZR 160 VSD FF 160 kW, 10.40 bar, water-mounted, with frequency inverter, with built-in adsorption dryer, volume flow 6.9 - 24.4 m3/min.

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Planetary mixer RWH 200 - Mixing system mixer mixer stirrer as good as new condition with PLC control and monitor visualization Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: RWH 200/VA/VA/FU N°: 6150 ; Y.O.M.: 2008 State. As good as new Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation Attachment (batch) size: max. 200 liters with Siemens Symatic Multi Panel Touch / Control / Frequency Inverter with 1x cleaning container and 1x mixing container double-walled for cooling/heating (approx. H-640 mm (without rollers); 650/720 mm) The planetary mixer RWH200 is a mixing system in which eccentrically running mixing tools rotate once around their own axis and additionally around the container axis in the vertically arranged mixing container (exchange c ...

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Capacity: 8.4 m3/h Operating pressure test 13 bar Engine: 3.5 kW - With connectors: DN 65, DN 50, DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 2200 mm Width: 500 mm Height: 1080 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

Type: FPE 3522 Capacity: 200 l/min Operating pressure test 4.5 bar Engine: 4 kW - With connectors: suction side DN 50 and print side: DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 500 mm Width: 480 mm Height: 1000 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

The FAM TS-1D is a transversal cutter for fluid and uniform cutting of vegetables such as carrots, leeks, salads ... • Product diameter: 90 mm for hard products and 110 mm for flexible products • The slightly angled knives of the cutting wheel guarantee a perfect cutting result. • Cut shapes: flat cut, crinkle cut, julienne slices, halved slices • Optional frequency inverter adjusts the speed of the belts and the cutting wheel. · The cutting wheel can be replaced by a "spear" type head to cut longitudinal segments. · Cutting sizes: various cut sizes possible from 1,6 mm up to 40 mm • Articulated dump hopper and easy-to-disassemble covers give access to the product and transmission areas. · Infeed belt ± 1.400 mm

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

pressure: 150 t distance between columns: 1565 mm stroke: 450 mm : 700 mm adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm feed speeds: 9,0 mm/sec pressing speed: 2,0 mm/sec return speed: 15,4 mm/sec Pressure power: 320 bar table-size: 1550 x 3000 mm table height: 600 mm total power requirement: 15,4 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3250 x 2500 x 2550 m This 150 ton gantry press is eminently suitable for straightening large and heavy structures and sheets. These Profi Press portal presses have a movable frame and a movable cylinder. Thanks to these features you have an easy access the different pressing and straightening points of the material. The longitudinal displacement of the frame is carried out by a frequency inverter and cogged belt to ensure precise slides. The lateral movement of the cylinder / headstock is motorised ...

LIQUIDATION of flow pack machine of the Spanish manufacturer RAELMA. This machine performs the function of wrapping in horizontal system (flow-pack). The dragging or introduction of the product is done through bars synchronized with the weld, giving a perfect finish with equal margins in both short and long objects, making the minimum changes. Model HORIZONTAL ENVELOPER GALAXY V. Strong steel structure with reinforced zones for areas of greater effort. Easy movement of the machine through wheels and a good grip with suction cups, making the machine is regulated to about 90mm. Signaling of faults or openings of protections through the touch screen. Pre-selector stop counter via touch screen. Packet/minute production counter via touch screen. Control panel at twenty-four volts according to current regulations. It carries coils at the bottom with positioning of manual self-centerin ...

Tapping machine make VEB Hermann Matern type BSG 5Year 1984Tapping capacity8 spindle speeds: 130 - 1200 rpm.Projection: 340 mmQuill stroke: 40 mmTable size: 370 x 500 mmTable with 3 horizontal T-slotsTable movement up / down manually by handColumn diameter: 120 mmelec. Connection: 220/380 V / 50 HzConnected load: 0.42 kWExternal dimensions:Weight: 270 kgWith:- separate control cabinet with swivel control panel- Emergency stop button- Footrest on the bottom plate- V-belt drive- stepless speeds throughxa0xa0 retrofitted frequency inverter ROfre 899202 E, 0.37 kW- Drill chuck FS 6used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 KUSTERS finishing foulard type 222.54-4600, face roller width 4.800 mm, working width 4.600 mm, the upper roller is S-roll, year 1969 and fully overhauled in 2011, AC motor with frequency inverter, entry with ERHARDT & LEIMER KF selvedge spreaders and scroll rollers, exit with banana roller and dancing roller for speed adjustment

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

Crowner KOSME with 8 closing heads work direction: left to right year of manufacturing: 2013 capacity: 4.000 - 12.000 bph the machine will be complete recondition incl. - new electrical panel with Siemens frequency inverter - new safety housing

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.

Voltage limitation module SIEMENS VPM 200 ( VPM200 ) 6SN1113-1AA00-1KA0 Rated voltage: 430 / 480 V 3AC Rated current: max. 200 A inverter clock frequency: 3.2 to 8 kHz spare part for HECKERT CWK400 D machining center, among others ! used ! Dimensions: 330 x 250 x 180 mm

Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing  ...