freezing chamber used for sale

Smoking trolley with corrugated profile, only for skewers (1000'er) with smoke skewer Star profile (20pcs.) Stainless steel W.-No. 1.4301 Dimensions: 1021 x 985 x 1970 mm 6 floors, floor spacing: 270 mm H-shape, crossbar height: 390 mm Load capacity approx. 500 kg Condition: Used, but in very neat condition and ready for immediate use. Availability: On request

I would like to offer the UHG 500 Easy vacuum chamber. It was purchased in 2018 at a price of €24,980, has been in operation for a total of 510 hours and is in very good condition. In addition to two Memmert ovens (see attachment), the vacuum chamber also includes a handling table with a load capacity of 1,000 kg, a new silicone mixing attachment (for a drill). We will give the chamber a set of spare funnels, inserts, tubes, dividers, cups and anything else we can find for it. We are getting rid of the chamber due to the specialization of our company in 3D printing using stereolithography, due to capacity reasons it is no longer important for us to do vacuum casting as well. The buyer must arrange the transport, there is a loading ramp available.

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.

Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization

Multivac C 500 is double chamber packing machine. This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber Machine dimensions W x D x H (with open chamber lid) in mm: 1,600 x 1,055 x 1,365 Sealing bar arrangement/dimensions: 1 x front, 1 x rear (2 x 650 mm)

Offer a keypad/computer for various Kerres smoke systems. Completely intact - we kept it in reserve during operation!

Description: Temperature range up to 200° C Inlay trays 500 x 550 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,100 mm, weight approx.: 250 kg

Description: 50 Hz, 930 watts, , Approx. Onsite Dimension. (l x w x h): 800 x 800 x 500 mm, weight approx.: 45 kg

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture

Fermentation chamber W&, P GaerstarFermentation for 1x peeler or 3 freezer racks without floor External dimensions : 100x275cm Height 250cmInternal dimensions: 77x245cm Height 190cmready for loading is in stockThe device is outside for over 1 years, whether it still works we do not know if it is still working, it is not testedDetails see picture

Standard descriptionFermentation room air conditioner type PG1000PG1000 is a plug &, play unit that is used in existing fermentation rooms. Easily connected to the water and electricity supply on site. TEMPERATURE RANGE:? Heat / adjustable: +200 / +450 C? Humidity / adjustable: 60% / 95% R.H.Technical Information kW CapacityVoltage/volt (as required) kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in collaboration with its customersAutomatic emptying of the steam tankElectrodes by water typeColor touch screenExternal placement of PG1000Automatic drain valveTouch screen computerAnd much more moreSystem sizesDimensions: D200 x W500 x H1700mm 

with Automatic EmptyingStandard DescriptionFERMENTATION CHAMBER AIR CONDITIONER Type PG1000PG1000 is a plug &, play unit that is used in existing fermentation rooms. Easily connected to the water and electricity supply on site. TEMPERATURE RANGE:? Heat / adjustable: +200 / +450 C? Humidity / adjustable: 60% / 95% R.H.Technical Information kW CapacityVoltage/volt (as required) kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in collaboration with its customersAutomatic emptying of the steam tankElectrodes by water typeColor touch screenExternal placement of PG1000Automatic drain valveTouch screen computerAnd much more moreSystem sizesDimensions: D200 x W500 x H1700mm 

Filter Seitz Orion, diversion chamber 40 x 40 More then 300 machines new and second hand on our seema .de

Gernal rotating cooking chamber, type: KBG-SE-LPF-2A, number: 02/00475, year of construction: 2002, 415 V, 50 Hz, year of construction: 2002, 108 kW, 191.4 A, inside dimensions: 1000 mm x 1050 mm x 2000 mm, s/s rack, 15 floors, dimensions floors: (15x) 640 mm x 535 mm, total dimensions: 1350 mm x 1650 mm x 3050 mm.

Henkovac double chamber vacuum machine, type: H-5000, serial number: 509053147, 18 A, 7 kW, seal length: (4x) 820 mm, chamber dimensions: (2x) 840 mm x 830 mm, total dimensions: 1900 mm x 1200 mm x 1400 mm.

Hein storage and pre-baking chamber, 400 V, inside dimensions: 700 mm x 1000 mm x 1950 mm, total dimensions: 880 mm x 1300 mm x 2630 mm.

Spako climate chamber, 6 floors, dimensions floor: (6x) 600 mm x 710 mm, total dimensions: 800 mm x 820 mm x 2000 mm.

HFE vacuum systems bv mobile double chamber vacuum machine, type: SB-620, serial number: 20111547, year of construction: 2011, 220/240 V, 1 Ph, 50 Hz, 27.5 A, chamber: (2x) 610 mm x 405 mm, seal length: (4x) 600 mm, Busch vacuum pump, type: RA 0063 F 5K5, capacity: 63 m³ per hour, total dimensions: 1350 mm x 640 mm x 1050 mm.

Beelonia smoke chamber, model: F2 70/60 ICS, 7 floors, floor dimensions: 545 mm x 600 mm, total dimensions: 880 mm x 660 mm x 1800 mm.

Turbovac mobile double chamber vacuum machine, model: SB620, 380/400 V, 3 Ph, 50 Hz, 16 A, weight: 522 kg, chamber: (2x) 780 mm x 620 mm, seal length: (4x) 620 mm, Busch vacuum pump, total dimensions: 1600 mm x 1100 mm x 1400 mm.

Bastra smoking/cooking chamber for 1 trolley with friction smoke generator, type: 851C, number: 851C/0118, 400/230 V, 3 Ph, 50 Hz, 16 kW, volume: 1000 liter, inside dimensions: 1150 mm x 750 mm x 1350 mm, total dimensions: 1250 mm x 1100 mm x 2220 mm. Including 1 s/s smoke trolley 8 floors, dimensions each floor: 760 mm x 670 mm.

Holac dicer, chamber: 115 mm x 115 mm, total dimensions: 1870 mm x 1100 mm x 1980. Including pallet with extra parts.

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

-Stainless steel -6 plastic wheels -5 floors -Dimensions 100 × 100 × 180 cm

Refer to code 1109 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1110 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1111 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1112 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1113 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1114 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1115 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1116 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1117 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1118 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1119 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1120 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Chamber dimensions(LxBxH): 660x740x220 mm Machine dimensions(LxBxH): 1600x1100x1350 mm Seal bar length: 2 x 660 mm Gas injection Pump capacity: 160 m³/h Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 8,5 kW ; 24 A

1 piece used Double chamber cement silo Volume approx. 60 tons (30/30) in good condition completely as shown including base frame Location: near Brandenburg Price on request without guarantee and/or warranty; Sale takes place ex location in the current condition, as it is and/or stands; Errors and/or misrepresentations excepted, subject to prior sale

Hyperbaric oxygen therapy (HBOT) is a vital treatment modality used in various medical conditions, including wound healing, decompression sickness, and more. These hyperbaric chambers offer a controlled environment for delivering high-concentration oxygen under increased atmospheric pressure. The 2019 and 2021 models cater to the diverse needs of patients and healthcare professionals, providing top-quality treatment and comfort. Key Technical Specifications: Chamber Dimensions: Both chambers are 90cm in diameter, providing ample space for patients while ensuring efficient pressurization. Software Operation: The 2021 model boasts the latest software operation, offering enhanced control and precision in treatment. TV Systems: Equipped with TV systems, patients can comfortably pass the time during treatment sessions. Oxygen Concentrators: Included oxygen concentrators ensure a stea ...

General SKU204U028 LocationBarneveld MakeConthermo Type10180129 No.064930WE Year of construction2007 Main Features MaterialStainless steel Volume3000 Ltr. Max.temp.150 °C Specified Features - Drying oven Drying ovencheck Max. temperature150°C Number of compartments:1 Internal width1500 mm Internal depth1500 mm Internal height1500 mm Electric heatingcheck Electric capacity3x 4 kW, 400 volt Number of doors:2 With fancheck Motor0,55 kW, 240/400 volt With timercheck MaterialStainless steel Information With switchcheck Weight1500 kg CEcheck Floorspace1,90x1,75 m Total height2,50 m Extra SpecificationsWith double roll conveyor. roll size 580 mm : load cap. 450 kg New arrivalsDrying ovensConthermoNew arrivalsDryers > Drying ovensBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

Viessmann cooling/freezing chamber External dimensions: 3600 x 2400 x 2160 mm Internal dimensions: 3400 x 2200 x 1960 mm Plate thickness: 10 mm Stainless steel floor Cooling/freezing unit in set Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included

Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Kat-No 08-1208 in very good condition Stainless steel tanks installed made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.