freezing chamber used for sale

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Brick production plant consisting of: 1. OMAG Tronic 140/90 brick forming machine, built in 1992 2. Lifting ladder 3. Curing chamber (not included) 4. Vehicle group built in 2014 5. Countersunk scaffold 6. Stone Solver 7. Stone Doppler 8. Stone sliding table 9. Packaging, year of construction 2012 10. Board brush 11. Board turner 12. Board stacker 13. Board Stack Buffer 14. Board destacker 15. Plate Tape 16. Strapping not included Concrete Block production plant consisting of: 1. block making machine OMAG Tronic 140/90 built in 1992 2. Lifting ladder 3. curing chamber (not included) 4. vehicle group built in 2014 5. lowering ladder 6. Stone Pusher 7. Stone Layer Doubler 8. stone sliding table 9. packaging, year of construction 2012 10. Board Brush 11. Board Turner 12. Board Stacking Device 13. Board Stacking Buffer 14. Board Destacker  ...

X working range max .: 4000 mm Y Working range max .: 2000 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 3200 W Beam on: 13.762 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 12 mm Plate thickness Al. Max .: 8 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5-Lense - Cutting head with 7,5-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - tel ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 21.067 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard configuration - Closed machine frame with integrated laser unit - Automatic pallet changer - Conveyor belt for small parts / slug - Gantry drive in combination with direct linear drives - Universal quickchange device for cutting head - Lens cutting head with 250mm focal length - Programmable cutting gas pressure - ControlLine: automatic height control and sheet edge detection - AutoLas Plus (FocusLine) - Laser power control - Positioning laser diode - SprintLine (FastLine) - PMS (PlasmaLine) - Automatic metal sheet detection - PierceLine - Programmable power cycles - Work area lighting - Automatic shut-down devi ...

Dohmeyer Freezing Tunnel Cryogenic Year: 2012 Weight: 6000 kg Power: 18 kW

Fermentation chamber fermentation chamber WP Gärstar -Door stop on the left -for 4 Stikkenwagen

Vertical Steam Sterilizer with Stainless Steel Housing Manufacturer / Type: H&P Varioklav 300E ClassicLine Use: is particularly suitable for the sterilization of culture media in Erlenmeyer flasks, bottles or culture tubes also suitable for the sterilization of various instruments and devices suitable for smaller quantities of pharmaceutical preparations in ampoules or bottles Ideal for mushroom cultivation etc. to sterilize culture media User-friendly microprocessor control The VARIOKLAV 300 E is easy to operate via a clear control panel with self-explanatory image symbols and a clear display of the process parameters. Easily call up three sterilization programs (two preset, one user-configurable) for liquids, instruments/solids, and waste at the touch of a button Visual signal indicates that the program is ready for withdrawal. The VARIOKLAV autoclave has a corrosion-resi ...

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

Year of manufacture: 2015 Screw diameter: 55 mm Chamber volume: 665 cm3 Shot weight: 604 g

Miwe Condo CO 4.0608 2D floor shop oven My. 2011 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates Entrance floor height 13 cm digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2011 400/230 V / 50Hz / 19.1 kW Electric From this Miwe Condo oven we have many constantly available in our warehouse immediately. Built from 2009 to 2012.

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

Pin mill Netzsch Type CUM 250 Equipped with a temperature probe in the grinding chamber Year of manufacture: 1992 Engine power: 10 kilowatts Materials in contact with product: stainless steel Equipped with a safety system for the opening of the grinding chamber.

GAS incineration furnace powder furnace Chamber furnace SOFORT LIEFERBAR Gas oven with circulating air SGS-320O Price 47,444.00 EUR net • Working dimensions ca.in mm 1800 width x 2500 height x 6500 depth • External dimensions ca.in mm 2320 width x 3410 height x 7300 depth • Operation NG • Heating capacity 320 kW • Heating time of the empty and cold oven approx. 15-40 minutes from room temperature 20 °C to 180 °C • Max temperature 230°C • Circulating air • Fans 1.1 kW x4 3P 380-400V • Insulation thickness from 240 mm to 300 mm • Transport in the oven 5 rails

Schamottsteinboden Pizzaovenen Under-upper heat can be controlled individually Temperature 0 - 450°C adjustable for 4+4 pizza (32 cm) 2 baking chambers each 660 x 660 x 140 mm Stainless steel Connection 400V, 9 kW, 32A-CEE plug Dimensions: 890 x 735 x 595 mm, WxDxH Weight 126 kg Visit our large bakery machinery warehouse!

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs Technical data: Pieces: 30 dough pieces Unit weight: 40 - 120 grams (dough/ product dependent) Dough insert: 1,200 - 3,600 grams (dough/ product dependent) Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (WxDxH) Height with lever: 2 ...

High temperature oven LDO-250T High-temperature chamber (dry-heat oven) for sale. Used, in excellent condition - 2 pcs.

Hobart 305 G Dry Steam Quick Cooker The Hobart 305G Dry Steamer offers the chef fantastic portion management and the ability to reduce waste through the speed of cooking – 5 times faster than traditional cooking and 5 times more cost-effective. Execution: Gentle, healthy cooking: Steaming, steaming or blanching Electronically controlled program sequences Digital and analogue chamber pressure display Automatic defrosting Automatic boiler emptying with drain pump Automatic self-cleaning Exhaust steam destruction with vapour condensation Self-diagnostics with fault indication Time Entry Control Operation via sensor buttons 3 pressure cooking stages: 0 / 0.5 / 1 bar 0.0 bar at approx. 60°C – 99°C (manually adjustable) 0.5 bar at approx. 111°C 1.0 bar at approx. 121°C Manufacturer: Hobart Type: Dry Steam Quick Cooker Model: 305 G Series: 5 ML No. 305G-31 U ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Key data: 2100 , 9

CNC milling machine 2132 OPTIMAT 2100x3200 ATC 100% European product New for 2022! CNC milling machine 2132 with a weight of approx. 4100 KG and a working table area of 2100x3200mm, equipped with an automatic 12th tool linear magazine cooperating with the HSD / HITECO 9kW 24000rpm electrospindle (ceramic bearing, HSK F63 interface) enabling the use of tools with a diameter up to 26mm inclusive! Technical parameters: Effective working size: 2100x3200mm - Trouble-free processing of the entire size of the furniture board - Vacuum workbench made of HPL Machine weight: approx. 4100KG - The frame of the machine made of the highest quality alloy is welded in its entirety, then subjected to the stress relieving process in a special chamber with special conditions, and then milled. This process ensures that excellent results of structural rigidity and stability are achieved Z-axis stro ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Composite plant VPM355-4830 / 3604959 with condenser for freezing with 3 compressors: 4TCS-8.2Y-40P Compressors each have 8hp Built: 2006

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Miwe Econo oven 6.0604 with intermediate rack and proofer, YOC 2010 MIWE Econo 6.0604 FP - Second-hand oven - Year of construction 2010 - Baking chamber with 6 tray supports 60 x 40 cm - Steam generation: Sprayer - Door hinge links - MIWE FP12 controller - Extractor hood with steam condenser - Surface-mounted panel - Proofer 613 mm FX0WZELE7 . 2 x 6 editions . AS control . Tray evaporator . Water inlet: manual - Castors 108 mm - Water inlet and outlet hose Becker condition Uncleaned Condition: see original pictures Decorative items are not included in the scope of services. The device is fully functional. Viewing and test run is possible at any time in Gochsheim.

Mesh and intestinal retracting device Wiegand NetMan NE-30 in a very good used and functional condition. Special machine for the production of rolled roasts, salmon, nut or cooked ham. Completely made of stainless steel. Purely pneumatic drive (external compressed air supply 6 to 14 bar required), 70 cycles/minute, chamber length 300 mm. Several shapes of different sizes are available. Machine is rollable. Dimensions B/T/H 180/50/120 cm. Workshop-tested, ready to use. Further on request.

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Make: TRUMPF Type: TRUMATIC L 3030 RotoLas Built: 2002 Working range: 3000 x 1500 mm Laser power: 2000 watts Engine hours: 54,000 Control: Siemens Sinumerik 840D Standard: Closed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000 high frequency excited, mirror telescope, cooling unit, logbook function Automatic pallet changer and longitudinal conveyor belt Drives: Maintenance-free three-phase servomotors HI-LAS High-pressure cutting Plasma Sensors (PMS) Fast editing with SprintLas ContourLas for making small holes Cutting gas pressure setting programmable Laser cutting head with 5" lens and laser cutting head with 7.5" lens, DIAS III Cutting head quick-change device Position laser diode Automatic focus position setting AutoLas Plus Logbook function Laser Oil spraying device for safe thick sheet processing Auto shut-off Workspace lighting  ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Used sand miill Vollrath type VMSM 2/15 A. Two chambers 15 L volume each. Motor 24 kW, weight 1050 kg.

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

Description from year 2009 rectangular drying chamber Purchase price per piece was 20,000 euros plus VAT purchased for dehumidifying paper i.e. the bays can be removed

This combi steamer from the premium manufacturer Rational is a CombiMaster® Plus with 20 x 1/1 Gastronorm inserts in electric design. Please note that this device is in extremely well-maintained condition. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 18,920 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment s ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric version from 2012. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 27,110 net. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6 months warranty on all electri ...

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

Used slow speed ball mill for the production of chocolate creams made by Techmasz model WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. Full documentation.

Paper Thickness: 100 G/M-1,2MM (Cardboard + Foils), (CX) Cardboard Attachment (Up To 1.2 MM), 5 Colours Plus Coating Tower For UV- And Water Based Varnish, (ALV) Extended Delivery 2600mm, Weko AP 262 Powder Sprayer, 2x UV Interdeck Dryer In 2nd and 5th Unit, 1x UV- And IR- Hot Air Dryer, (FAPC) Fully Automatic Plate Change, (ITC) Inking Unit Temperature Control, Colortronic Control Centre, Varidamp Dampening, Varicontrol, Baldwin Cooling, Intercommunication System, Colour Managment Techion, Prepared For CIP Link, Recovered Rollers, Retrofitting Non-Stop Feeder and Delivery, (ACS) Air Cleaning System, (GTW) Auto-Wash System for Blankets and Rollers, Auto-Wash Devices For Impression Cylinders in 1,3 & 4 Unit, Anilox Rollers Chamber Doctor Blade System