136,420 used machines on RESALE, but how to find them? Machine Search
Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen
Sanding width 1350 mm. Workpiece thickness: 4 - 170 mm Equipped with 3 aggregates, 1st steelroller, motor 22kW 2nd roller 65? Shore, motor 15kW 3th Kombi unit, motor 12kW, combination roller with 45? Shore and pneumatic controlled sanding shoe cleaning brush at outfeed Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurementm with manual setting at the machine feed Sanding belt dimensions: 1370 x 2620 mm 5 rollers on in- and outfeed table
Unit 1: Combination sanding unit Effective sanding width: 650 mm. Sanding belt dimensions: 1900 x 650 mm. Sanding belt motor: 7.5 kW Sanding belt runs over a contact roller and sanding shoe Unit 2: Brush unit / structuring Sanding brush motor: 5.5 kW Brush diameter 240 mm, shaft bore 50 mm Minimum workpiece length: 290 mm. Workpiece thickness: 0.5 ? 200 mm. Workpiece feed via conveyor belt, feed speed 8 and 16 m/min Motorised height adjustment with digital electronic thickness gauge Thickness sensor Air Pressure safety device
Wide belt sander with 2 units Max. working width: 910 mm. Panel transport by belt, 2 feed speeds, 4,5 / 9 m/min Equipment: Roller with motor 11 kW, 90? Shore lifting facility of first roller on control panel Combi unit with single belt over roller and pad, roller 45? Shore mecanical lifting of second roller oscillation with infrared detection electro magnetic break main motors
Fine sanding machine Working width: 1300 mm. Workpiece thickness: 3-140 mm N? of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaning Brush cleaning unit scotch bride 250 mm diameter, 4 kW Brush cleaning unit 150 mm diameter, 1,5 kW Feedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency control Working height 930 mm +/- 20 mm Carpet cleaning brush EA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust
Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sou ...
Key data: 1900 mm, 4 , 380 mm
Description 1 indestructible 4 roller wide belt sanding machine from Böttcher & Gessner - grinding width ca. max.1900 mm, machine can drive up to approx. 390 mm, constant table machine. Two grinding rollers at the top and two at the bottom, one of which oscillates at the top and one at the bottom, retaining belts are clamped directly on the individual rollers. Weight approx. 10 t... With roller conveyor to the left and right of the machine 1. Performance data grinding machine Upper grinding motor No. 1 30 kW / 80 A Upper Grinding Motor No. 2 30 kW / 80 A Lower grinding motor No. 1 30 kW / 80 A Lower Grinding Motor No. 2 30 kW / 80 A Feed motor 7.5 kW / 25 A Motor table adjustment 7.5 kW / 25 A Fuse main switch with 400 A. Overhead crane for dismantling is available. Sale as seen without warranty from location and without dismantling.. But help is being provided. ...
Code: 0484 Brand: VOLPATO Model: LBO-60/G - CE Standard Cast-iron belt sanding machine with 3 motors for wood, composites, metals, aluminium and various materials - CE Standard Technical data: Cast iron base Table length mm 3000 Table width mm 1000 Vertical stroke mm 680 Belt size mm 8400 x 150 Motor Kw 4,12 - Speed 18 mt/sec Reverse belt rotation Vacuum motor Kw 0,56 Diameter pulleys mm 240 Suction diameter mm 120 Overall dimensions mm 4500 x 1500 x 1500 h Weight kg 600
Gebr. Long belt grinding machine JOHANNSEN T85 ST / PNEUMA YOC 1991 Total connected load: 5.62 kW / 13 A Motor power: 5.5 kW Table size: 280 x 95 cm Pneumatic grinding unit (pneumatic pressure) electr. Table lift Belt dimensions: 150 x 7,800 mm Offset (both sides): 550 x 310 mm 1 sanding shoe 450 mm Switch for clockwise/counterclockwise rotation Integrated lighting Rotating belt blow-out device Extraction connection: 140 + 120 mm Space requirements: 395 x 230 cm Weight: approx. 750 kg The machine comes from a 1-man operation.
Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Angled conveyor belt with protective cover -Speed: 4.2 m/min -Conveyor belt width: 80 mm -Conveyor belt length: 1355 mm / 340 mm -Motor: Groschopp 0.065 kW -Dimensions: 1780/500/H340 mm -Weight: 63 kg
Box with sanding belt grit 40 and 100x560 mm Auction-ID: A1-50251-146
Box with abrasive belt grit 60 and 100x560 mm Auction-ID: A1-50251-135
For wooden floors, with sanding belt and extraction Auction-ID: A1-50251-509
Box with sanding belt grit 40 and 100x560 mm Auction-ID: A1-50251-148
This machine is fixed to the ground. This lot must be dismantled by the buyer himself and must also provide the necessary tools, transport and/or packaging material. Auction-ID: A1-50251-533
Box with sanding belt grit 40 and 100x560 mm Auction-ID: A1-50251-145
Box with abrasive belt grit 60 and 100x560 mm And Rolls with abrasive belt grit 60 and 115x50 mm Auction-ID: A1-50251-136
Racking and otherwise parceled out items are not included. Auction-ID: A1-50251-251
Box with sanding belt grit 40 and 100x560 mm Auction-ID: A1-50251-147
Box with abrasive belt grit 60 and 100x560 mm Auction-ID: A1-50251-134
roll diameter: 400 mm throat: 900 mm workpiece height: 400 mm table-size: 700 x 660 mm saw band length: 4630 mm turning speeds: 45 - 500 m/min : mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Dimensions (LxWxH): 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0483 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050
Mado Rollekta MKB555 Bone Band Saw. One quarter of the table can be folded away to use the other quarter as a rolling table. Alternatively, the stop of the rolling table can be folded away to be able to use the saw like a normal, bone band saw. The saw has a neat and quiet run, video of the test run can be sent via WhatsApp. There are a few small things to do on the saw, such as replacing cables, renewing the star handle and doing a basic cleaning. Perfect for export. Three new saw belts are delivered with the saw, one of which is already assembled
Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm -Weight: 152 kg
Polishing wheel diameter 350mm Grinding wheel wheel 420mm Speed 1450rpm Motor power 4.4KW see pictures Condition: untested (6) Auction-ID: A7-50523-864
Belt sander Moror speed 2850rpm Moror power 3.0KW see pictures Condition: untested (6) Auction-ID: A7-50523-924
Throughput height: 180mm Auction-ID: A1-50090-96
Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5) Auction-ID: A7-50523-801
- Automatic belt checkweigher - Load cell: Mettler-Toledo SB60.2 Terminal: Mettler-Toledo ID1 Plus Maximum load: 35 kg Auction-ID: A1-50529-288
Belt sander with contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Dimensions approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50523-701
Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sander. Belt width 100 mm Belt length 1220 mm Belt speed 1140 m/min.Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-50523-706
Belt sanding machine with contact disc: 200 x 75 mm - Surface grinding table continuous: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-50523-788
Belt sander with contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Dimensions approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50523-730
Operating hours counter: 01577, equipped with 4 turbines, motor power: 11 KW, 1x mesh belt, speed infinitely adjustable, motor power: 2.2 KW, 1x elevator, 1x integrated filter installation with pneumatic knocking device, 2x motor driven in and out roller conveyor sector, 2x roller conveyor sector on rails, 1x main power control box and 2x control console. including 1 Kruizinga waste dump container Auction-ID: A1-49889-8
working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...
working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...
French papers - Net binding - 1 season driven -15 knives - Knife distance: 65mm - bale width: 120cm - bale diameter: 90 - 180cm Auction-ID: A3-46130-16540
Professional motorized belt conveyor for the transport and transfer of products in a production line, especially in the food, bakery and pastry sectors. The machine is equipped with a conveyor belt, stainless steel side guides to hold the products on the work area and an electric geared motor to drive the belt. Metal frame construction with adjustable feet for easy leveling and integration into an existing line. Auction-ID: A3-46129-37139
including rails (rails bolted to ground, studs need to be ground off) Auction-ID: A1-50566-1010
MAPANVA Professional Belt Rolling Mill MAPANVA professional sheeter for working and regularly displaying dough in bakery and pastry shops. Equipped with wide conveyor belts, rolling thickness adjustment system, control wheels, pressure gauge and remote on/off controls. Robust professional construction with stainless steel elements. Machine mounted on a mobile chassis with wheels, allowing it to be moved around the workshop. Folding belts to reduce space during storage. Spanish manufacturing – CE marking Auction-ID: A3-46129-37192
Webomatic CL-C 950 chamber belt vacuum packaging machine – condition: as new, The CL-C 950 is the entry-level model within the WEBOMATIC CleanDesign range and enables fully automatic bag packing with very little manual work. The patented Roll-Back-Lid allows the inside of the lid to be cleaned quickly and thoroughly without exposing the conveyor belt to cleaning fluids., Key features, - Chamber of 1,050 × 850 × 285 mm (l × w × h), suitable for large pouches, - 950 mm seal bar across the full width, - Conveyor belt for automatic product feed-through, - Patented Roll-Back-Lid for fast and thorough cleaning, - Mitsubishi PLC with colour touchscreen, - WEBOMATIC CleanDesign construction, Applications, - Meat and meat products, - Fish and seafood, - Cheese and dairy, - Ready meals, - Medium to large batch production, Located in Emmeloord, the Netherlands. Available immediately – price ...
Wide belt sander SCM Sandya 10 Working width 1100mm Working height 5-150mm Number of grinding units 2 1.Metal calibration shaft 2.Agrgat combi metal with boot Combi unit with sanding belt blowing Two feed speeds Material thickness gauge 15kw main motor Machine Weight: 1750kg Machine dimensions: 165x186x206cmH
Equipped with lifting eyes, floor is mounted. Extraction parts do not belong to the machine. Working width 110cm. Equipped with 3 rulers (solid, veneer and lacquer) adjustable in speed. Extraction on the sanding belt. Auction-ID: A1-47362-12
Intermediate conveyor belt / conveyor belt Type LTB 250-3500, S/N 81005, built in 1997 Length 3500 mm Width 250 mm Height 820-1000 mm Feed rate 20 m/min. with slip plate 3000 mm 2x pneum. Glass bead ejector Condition: technically and optically in very good functional condition Delivery: EXW Delivery time: at short notice by arrangement Viewing: by arrangement
Connecting conveyor belt size: 1500 x 610 x 950 mm (WxDxH) Auction-ID: A7-50729-130
maximum number of results exceeded
please refine your search
10 € 
