frame used for sale

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible.

Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

A Brückner high-performance stenter, drying and fixing machine with steam heating is available. Chain type: SK917, min. product width: 600mm, max. product width: 3600mm, infeed length: 5000mm, outfeed length: 5000mm. Documentation available. An on-site inspection is possible.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 850 mm   table surface (front-back): 550 mm SLIDE   table surface (left-right): 560 mm   table surface (front-back): 376 mm   spigot hole diameter: 50 mm   stroke: 110 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 0 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 855 mm   space requirements -front/back-: 1635 mm   total height: 2640 mm   total weight approx.: 5400 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   ...

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 15 to PRESS TABLE   table surface (left-right): 360 mm   table surface (front-back): 260 mm SLIDE   stroke rate (max.): 165 /min SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke min.: 7 mm   stroke max.: 60 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 226 mm ELECTRICAL SPECIFICATIONS   total power consumption: 1.15 kW   mains voltage: 400 V DIMENSIONS / WEIGHTS   total weight approx.: 630 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

1 BABCOCK stenter for woven, roller width 340 cm, working width 320 cm, year 1995, 4 ECON-AIR chambers updated brand new in 2004, gas heated with MAXON burners, horizontal pin and clip chain, J-box entry, foulard, MAHLO weft streightener type RFMC 10-A from year 2001, cooling field, plaiter exit

1 UNITECH stenter type Redevo, year 2014, width 220 cm, 6 fields, gas heating, combined pin and clip horizontal chain, BIANCO finishing padder, MAHLO weft streigthener

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 50 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 430 mm   table surface (front-back): 200 mm   clamping surface diameter: 340 mm   spigot hole diameter: 40 mm   stroke: 90 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 700 mm   space requirements -front/back-: 1295 mm   total height: 2300 mm   total weight  ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   to ...

Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 1850 mm Depth 1200 mm Width 1000 mm Cubic design Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description MJ UNI HIGH 1000 liter tanks with two different dimensions: Height: 185 cm Width: 100 cm Depth: 120 cm Or Height: 182 cm Width: 100 cm Depth: 115 cm Topsoil: Flat bottom Filling nozzle Subsoil: Cone bottom pulled forward Remaining Schedule Tank on rack with forklift shoes

2 metal doors in mint condition, complete with frame 60 cm wide, 2 m high, had not yet been installed

Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear

✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗️ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...

355 x 185 cm, 3 stamps on top, 2 on the side Used machine

🚨 Be quick †limited stock! We offer top Layher Blitz scaffold packages †100  m ² of fa çade scaffolding , system width 1.09  m . Includes access deck with ladder, base jacks, and everything you need to get started. The complete set for your next façade scaffold project †ready to use and available while supplies last . ⚡   This package is based on the proven Layher Blitz frame scaffold system with a 1.09 m system width. It includes heavy-duty steel or aluminium decks, access decks with integrated ladders, diagonal braces for structural stability, and base jacks for safe height adjustment †all original Layher components .   Thanks to the standardized 2.57 m bay length, the system is easy to expand and fully compatible with other Layher Blitz parts †ideal for professionals who want to work quickly ...

Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.

Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded

PRESS DESIGN   drive system: eccentric / crank   table cushion: yes PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   opening in bed (diameter): 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   clamping surface diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATION ...

Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.

Frame from JCB loader, axles, hydraulics.

Closing frame for a blow molding machine Kautex KB 50 Year of manufacture 1984 Overhauled in 2023 all cylinders overhauled and with new seals. The same applies to protective grilles, guide shafts, shape height adjustments, etc. All mounting threads of mounting plates reworked.

Key data: 3550 mm, 2250 mm

Frame press Hess Type SPEEDY Built in 1995 Crimping dimension 3550 mm x 2250 mm Insertion depth 100 mm Electric height adjustment of the press cylinders Hydraulic 160 bar pressure capacity Hydraulic power unit 2.2 kW 3 vertical cylinders: 1000 mm stroke, 20,000 N pressing force per cylinder 2 horizontal cylinders: 80 mm stroke, 12,500 N pressing force per cylinder Smallest dimensions without medium pressure beam horizontal 380 mm, vertical 320 mm Dimensions 4500 mm x 950 mm x H 2600 mm Weight 1,800 kg Loading dimensions Length 4500 mm x Height 2450 mm Width approx. 2400 mm

A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t

Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t

Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 55 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 400 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 50 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 6 mm   stroke max.: 50 mm   stroke rate (min.): 50 /min   stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   spac ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz ...

Spindle machine on wooden base frame

Polishing jack BOLEY, no nameplate found

Granite measuring plate on base plate plate size approx. 1,000x800x170 mm, without the contents on the table

For cutting in vertical and horizontal position Heavy duty machine with a welded steel frame Automatic folding chassis for avoiding contact of the PVC slats with the saw, during horizontal cutting. Underlying support in aluminum with folding rollers for easier movement of panels. Manual movement of the pressure bar and carriage for vertical and horizontal cuts. The latter are mounted with 6 points on the batti. Adjustable cutting depth Automatic folding chassis : electric. Support 4680 mm divided into 2 parts for use of small panels 4 mechanical stops for horizontal cuts 2 stops for vertical cuts Extra stop for vertical cuts Device for repetitive horizontal cuts Folding rollers Brake motor Maximum cutting length: 5300mm Max vertical height: 2200mm Max horizontal height: 2100mm Max cutting depth: 80mm Power of Motor: 5.5kW Saw blade diameter: 300mm Saw blade speed: 5000r/min

Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor

Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile

PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 950 mm   table surface (front-back): 660 mm   thickness of bolster plate: 68 mm SLIDE   table surface (left-right): 540 mm   table surface (front-back): 450 mm   spigot hole diameter: 60 mm   stroke: 130 mm   stroke rate (max.): 65 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS   total weight approx.: 7000 kg Located in Barcelona - Spain 2 identical units available

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, sewer ring lifters -Manufacturer: Zagro, Hydraulic manhole frame lifter type HK 6 -Lifting round shafts: inner diameter of approx. 60 cm, outer diameter of approx. 78 cm -4 lifting cylinders -Transport wheels -Dimensions: 1400/1120/H1020 mm -Weight: 169 kg

Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Bra ...

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 570 mm, adjustable -Number: 11 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H570 mm -Weight: 12 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 660 mm, adjustable -Number: 8 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H660 mm -Weight: 12.5 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 460 mm, adjustable -Number: 13 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H460 mm -Weight: 11 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 400 mm, adjustable -Number: 14 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H400 mm -Weight: 8 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 295 mm, adjustable -Number: 14 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H295 mm -Weight: 7 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 200 mm, adjustable -Number: 14 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H200 mm -Weight: 4.9 kg/piece

equipment tested and working , sign of use are present Auction-ID: A7-45223-70

equipment tested and working , sign of use are present Auction-ID: A7-45223-89