133,537 used machines on RESALE, but how to find them? Machine Search
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...
Working width: 3600 mm Working height: 2600 mm Number of cylinders: 5 St. loading dimensions L x W x H: 4400 x 1150 x 2970 mm weight: 3000 kg Schafberger + Sproedhuber Bavaria Frame Press --------------------------------- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoidi ...
Working width: 3500 mm Working height: 2550 mm Number of cylinders: 6 St. loading dimensions L x W x H: 4500x950x2900 mm Hess Speedy frame press -------------------------------------- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and press ...
CONTROLS conventional PRESS FORCES total force (nominal): 100 to SLIDE stroke rate (max.): 55 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 10 mm stroke max.: 120 mm DIMENSIONS / WEIGHTS total weight approx.: 4800 kg
Working width: 4000 mm Working height: 2550 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H: 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for mortise and tenon corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550 mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure p ...
Precision granite control marble with control square, intended for metrology operations, quality control, precision mechanics, CNC machining, tooling and industrial maintenance. This equipment allows the control of flatness, squaring, alignment and dimensional control of mechanical parts. Ideally suited for mechanical workshops, quality departments, metrology laboratories, industrial companies and technical schools. Auction-ID: A1-48554-1064
General Description Heavy-duty industrial hydraulic press with a nominal pressing capacity of 1,200 tonnes . The machine features a massive straight-side / H-frame construction with guided moving slide and is designed for heavy metal forming, pressing, punching and similar industrial fabrication operations. Technical Details Machine type: Heavy-duty hydraulic press Nominal pressing force: 1,200 t Straight-side / H-frame construction Large hydraulic ram / cylinder assembly Guided moving platen / slide Heavy-duty T-slotted working table Substantial die / tooling assembly installed Hydraulic power equipment Push-button operator controls Heavy bolted steel frame construction Condition Used industrial condition. The press appears substantially complete and remains installed with hydraulic equipment, moving slide, working table and tooling present. The main frame and guides ...
Technical data Manufacturer: SCHMIDT Technology GmbH Type: 36-12 Material no.: 40017503 Serial number: 0002 Year of Make: 2014 Compressive force: 60 kN Stroke: 12 mm Operating pressure: 3–6 bar Weight: 150 kg Configuration Press with workpiece holder / clamping device Pneumatic clamping and adjustment units Digital measurement display Mitutoyo ABSOLUTE Mahr gauge display Compressed air preparation and pneumatic components Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-139
METAL DOOR WITH FRAME - 5 PCS - - 80 x 120 x H60 Auction-ID: A7-49228-1125
100 t (100 Mp per Aufstellplan)ca. 22 t (22 Mp per Aufstellplan)40 t (40 Mp per Aufstellplan)560 mm200 mm720 x 720 mmca 3370ca. 2760 mm240 mm120 ms
Power (ton) 60 Table dimensions ( x-y/mm) 890 x 458 Slide Dimensions X-Y (mm) 890 x 458 Stroke (mm) 20 - 76 Slide Adjustment (mm) 80 Strokes type adjustable Stroke per minute 70 - 750 Overhauled in 2021
Raised office container with load-bearing metal structure, access staircase and numerous windows. Ideal solution for creating a supervisory station, workshop office, administrative room or independent workspace inside an industrial or logistics building. The elevation makes it possible to make efficient use of the available space under the structure. Robust construction with secure access via stairs and railings. Sold without contents. Auction-ID: A1-48554-195
Technical details Type: Electric motor stator assemblies Configuration: - Factory-wound copper stators - Cast aluminium motor housings - Laminated stator cores - Multiple IEC frame sizes Application: - Three-phase AC induction motors - Industrial electric motor assembly - OEM motor production - Spare parts inventory Construction: - Cast aluminium housings - Copper windings with insulated lacing - Laminated electrical steel cores Estimated frame sizes: - Approx. IEC 63–132 Estimated quantity: Approx. 18–22 units Dimensions (largest unit): - Length: Approx. 210 mm - Width: Approx. 210 mm - Height: Approx. 250 mm Weight: Approx. 12 kg per unit Condition: New old stock (unused) Observed condition: - Factory-wound stators installed in housings - Copper windings clean and intact - No visible corrosion or physical damage - Castings undamaged - Stored indoors ...
Sliding doors for industrial freezer with frame and sliding mechanism- 2 doors Auction-ID: A7-49776-7
Caterpillar 740 powershift transmission – 7F/1R – including transport frame Specifications: Brand: Caterpillar Application: Caterpillar 740 Part: complete transmission Type: planetary powershift Gears: 7 forward / 1 reverse Operation: electro-hydraulic Casting/house number: 6Y9577-03 Dimensions: approx. 1.30 x 0.80 x 1.20 m (L x W x H) Features: Electro-hydraulic control/switch block Solenoids Hydraulic lines and connections Various mounting points Integrated lifting eye Steel transport/storage frame Particularities: Suitable for use in Caterpillar 740 articulated dump trucks. Auction-ID: A1-47388-194
Equipped with: CW10 connection, working width 2,000 mm, suitable for excavators of approx. 6–14 tons, equipped with excavator quick-change mount, reinforced leveling/scraping bar, Auction-ID: A1-47388-322
Consisting of approx. 60 tubes with various sizes. Among other things, 340cm. Includes intermediate tubes, couplings, etc. Auction-ID: A1-49846-188
The Elephant trellis made of durable FSC hardwood (75x180 cm) is ideal for supporting climbing plants. Made of tropical hardwood, it offers longevity and stability, with diagonal slats and stainless steel screws. The Elephant hardwood trellis can be attached to a wall or wall or mounted between two posts as part of the fence with corner fittings. Auction-ID: A1-45099-2202
Hardwood interior door frame for flush doors, factory primed. Made from hardwood with a diameter of 56 x 90 mm. White grounded. Suitable for door widths from 630 to 930 mm and a maximum door height of 2115.5 mm. Delivery includes: 2 styles, 1 top rail and 1 stellat. Auction-ID: A1-45099-2205
The Elephant trellis made of durable FSC hardwood (75x180 cm) is ideal for supporting climbing plants. Made of tropical hardwood, it offers longevity and stability, with diagonal slats and stainless steel screws. The Elephant hardwood trellis can be attached to a wall or wall or mounted between two posts as part of the fence with corner fittings. Auction-ID: A1-45099-2201
The Elephant trellis made of durable FSC hardwood (75x180 cm) is ideal for supporting climbing plants. Made of tropical hardwood, it offers longevity and stability, with diagonal slats and stainless steel screws. The Elephant hardwood trellis can be attached to a wall or wall or mounted between two posts as part of the fence with corner fittings. Auction-ID: A1-45099-2203
Hardwood interior door frame for flush doors, factory primed. Made from hardwood with a diameter of 56 x 90 mm. White grounded. Suitable for door widths from 630 to 930 mm and a maximum door height of 2115.5 mm. Delivery includes: 2 styles, 1 top rail and 1 stellat. Auction-ID: A1-45099-2204
The Elephant trellis made of durable FSC hardwood (75x180 cm) is ideal for supporting climbing plants. Made of tropical hardwood, it offers longevity and stability, with diagonal slats and stainless steel screws. The Elephant hardwood trellis can be attached to a wall or wall or mounted between two posts as part of the fence with corner fittings. Auction-ID: A1-45099-2200
For sale is a new KOCH stainless steel material/granulate container for industrial plastics processing. The container is used for the storage and provision of plastic granulate and is particularly suitable for injection moulding companies and for integration into material conveying and supply systems. Technical data / equipment: Manufacturer: KOCH Technik Material: Stainless Steel Dimensions: approx. 1,200 × 1,200 × 1,180 mm Sturdy stainless steel base Funnel-shaped container bottom Material outlet in the lower area Large hinged lid Separate opening for material feeding Suitable for plastic granules and other free-flowing materials As good as new, very well maintained condition High-quality and robust industrial design for injection moulding companies, plastics processors and material supply systems. Viewing possible by prior appointment. Auction-ID: A1-49948-6
A total of about 120 pieces, see photos for more details Auction-ID: A7-49942-1060
Upholstered bench with metal frame – grey/ baige Auction-ID: A1-49989-101
2 x 4 adjustable centers for marking gutters Auction-ID: A1-47360-300
pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m
pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
pressure:6,3 t throat:300 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:450 x 400 mm hole in the table:80 mm table height over floor:700 mm ram surface:50 mm oil volume:90 l power requirement:5,5 kW weight:1,35 t dimensions (WxDxH):1,8 x 2,0 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical
pressure:160 t throat:370 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1000 x 700 mm hole in the table:100 mm table height over floor:820 mm ram surface:600 x 520 mm speed down:350 mm/s speed up:350 mm/s working speed:12 - 36 mm/s oil volume:1100 l power requirement:27,0 kW weight:16,5 t dimensions (WxDxH):1,8 x 2,7 x 3,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable
pressure:100 t throat:450 mm stroke:170 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:3220 x 800 mm table height over floor:850 mm ram surface:3220 x 800 mm speed down:50 mm/s speed up:150 mm/s working speed:7 mm/s oil volume:600 l power requirement:20,0 kW weight:16,0 t dimensions (WxDxH):3,7 x 2,5 x 2,6 m
pressure:160 t throat:360 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:920 x 700 mm Hole in the table:150 mm table height over floor:960 mm passage to the back:590 mm ram surface:620 x 560 mm speed down:390 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:16,0 t dimensions (WxDxH):1,6 x 2,5 x 3,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch
pressure:100 t throat:540 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:50 t stroke of drawing cushion in table:200 mm die cushion area:710 x 650 mm table height over floor:910 mm ram surface:1000 x 1000 mm capacity of ejector in ram:2 t ejector stroke in ram:200 mm return capacity:19,5 t speed down:400 mm/s speed up:300 mm/s working speed:57,7 mm/s oil volume:650 l power requirement:37,5 kW weight:15,0 t dimensions (WxDxH):1,5 x 2,5 x 4,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch
pressure:40 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:660 / 1000 mm table surface area:630 x 500 mm hole in the table:200 mm table height over floor:1060 / 720 mm ram surface:450 x 360 mm speed down:60 mm/s speed up:300 mm/s power requirement:7,5 kW weight:2,75 t dimensions (WxDxH):1,0 x 1,8 x 3,05 m additional plate in table:height approx. 340 mm
pressure:40 t throat:360 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:620 x 500 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:150 mm table height over floor:850 mm ram surface:300 x 250 mm speed down:200 mm/s speed up:200 mm/s working speed:40 mm/s power requirement:11,0 kW weight:2,8 t dimensions (WxDxH):1,1 x 1,7 x 3,0 m drawing cushion in table:hydraulisch
pressure:63 t throat:320 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:750 x 600 mm pressure of drawing cushion in table:6,5 t stroke of drawing cushion in table:80 mm die cushion area:240 mm table height over floor:800 mm ram surface:500 x 450 mm capacity of ejector in ram:0,5 t ejector stroke in ram:70 mm speed down:300 mm/s speed up:300 mm/s working speed:50 mm/s oil volume:380 l power requirement:12,0 kW weight:6,5 t dimensions (WxDxH):1,3 x 2,0 x 2,75 m drawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic
pressure:25 t throat:400 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:620 x 620 mm Hole in the table:80 mm table height over floor:650 mm ram surface:110 mm speed down:300 mm/s speed up:500 mm/s working speed:14 - 85 mm/s oil volume:400 l power requirement:6,0 kW weight:3,8 t dimensions (WxDxH):1,5 x 2,1 x 3,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:25 t throat:355 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:500 x 500 mm hole in the table:180 mm table height over floor:700 mm ram surface:250 x 250 mm power requirement:7,5 kW weight:2,1 t dimensions (WxDxH):1,45 x 0,9 x 2,55 m
pressure:160 t throat:500 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1140 x 980 mm hole in the table:180 mm table height over floor:860 mm ram surface:1000 x 800 mm oil volume:1000 l power requirement:50,0 kW weight:18,0 t dimensions (WxDxH):1,3 x 2,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical cutting impact cushioning:hydraulic
pressure:6,3 t throat:210 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:380 x 350 mm hole in the table:100 mm table height over floor:1050 mm ram surface:45 mm power requirement:4,0 kW weight:0,8 t dimensions (WxDxH):0,8 x 1,2 x 2,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:63 t throat:325 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:700 mm table surface area:640 x 640 mm pressure of drawing cushion in table:25 t stroke of drawing cushion in table:200 mm die cushion area:450 x 450 mm table height over floor:800 mm ram surface:560 x 560 mm oil volume:450 l power requirement:15,0 kW weight:7,0 t dimensions (WxDxH):1,2 x 2,0 x 3,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
pressure:100 t throat:320 mm stroke:160 mm distance table/ram, max. stroke up, adjustment up:480 mm table surface area:630 x 550 mm hole in the table:200 mm table height over floor:860 mm ram surface:560 x 450 mm oil volume:500 l power requirement:30,5 kW weight:6,4 t dimensions (WxDxH):1,6 x 2,0 x 2,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:hydraulic depth stop:mechanical
maximum number of results exceeded
please refine your search
300 € 
