frame saw used for sale

Caterpillar SR4 - Used - 2000 kW - 827 frame

Key data: 300 t, 800 mm

Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm

Key data: 800 t, 1350 mm

Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no

Hydraulic Press MURARO 500 ton Year of construction: 2001 Dimension table: 2600 x 1600 mm Dimension lower table: 2700 x 1600 mm Light max: 1500 mm Light min: 700 mm Slide stroke: 900 mm Cushion stroke: 400 mm Side upright clearance: 770

Key data: 1200 t, 1000 mm

Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no

This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...

The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...

Dimensions (L/W/H): 3600x800x1900 mm Weight: 2400 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Brückner Type of Machine : Clamping Frame Working width: max. 2200 mm Roller width: max. 2400 mm Number of temperature zones/sections: 3 Calator: 2250 mm Find more here - / Contact us at -

Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

4x shackles 2t per pair Auction-ID: A7-45172-154

4x shackles 2t per pair Auction-ID: A7-45172-155

Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition

Full frame saw Balfour boy with Chuck wagon Wood diameter of exceeding 60 cm Engine 55 kW L x W x H: 230 x 200 x 400 cm Weight approx. 8 to Built in 1958 Disassembly by buyer The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

For cutting in vertical and horizontal position Heavy duty machine with a welded steel frame Automatic folding chassis for avoiding contact of the PVC slats with the saw, during horizontal cutting. Underlying support in aluminum with folding rollers for easier movement of panels. Manual movement of the pressure bar and carriage for vertical and horizontal cuts. The latter are mounted with 6 points on the batti. Adjustable cutting depth Automatic folding chassis : electric. Support 4680 mm divided into 2 parts for use of small panels 4 mechanical stops for horizontal cuts 2 stops for vertical cuts Extra stop for vertical cuts Device for repetitive horizontal cuts Folding rollers Brake motor Maximum cutting length: 5300mm Max vertical height: 2200mm Max horizontal height: 2100mm Max cutting depth: 80mm Power of Motor: 5.5kW Saw blade diameter: 300mm Saw blade speed: 5000r/min

max. working pressure: 6 bar, with extraction system, type: LAS-A-X10, automatic stop, treadmill in front, aluminium frame tray and frame labelling unit, Fabr. EBS, type: 6200P, built in 2014 with digital display

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Type: Vertical band saw Electrical supply: 380V 3F 50 Hz Auction-ID: A7-44526-7

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Equipped with: 5-pin 400V plug, extraction connection 115mm, Auction-ID: A1-41990-111

Bone saw/band saw REICH KS 220, 380 V

Unaudited Auction-ID: A7-45427-179

Hilti WSR 1400-PE Reciprocating Saw Foxtail Tiger Saw with Case 230V 1400W Auction-ID: A7-45427-119

Unaudited Auction-ID: A7-45427-173

Good condition Auction-ID: A7-45427-118

used frame filter press / filter press REWA 1200x1200 chamber number: 50 pieces the arrangement is in an as good as new state.

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 28 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU countries (Austria, Italy etc.) with appropriate VAT number (E.g. AT/IT) will each receive a net ...