frame 6 used for sale

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Hazardous goods container, REI 90 / F 90 fire protection warehouse type WFP, cantilever racks, interior lighting, drive-on ramp, leakage sensor – used - : Price ex location: 29.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of Make: 2013 Type: BMC-X 600-K-T90-2 Type: REI 90 / F 90 Fire Protection Bearing WFP-X 14; Surface room system Exterior paint RAL 9002 grey-white Interior paint RAL 9002 grey-white Door finish (both sides) RAL 9002 Grey White Dimensions Inside Exterior without extensions Width (mm) 2,560 2,952 Depth (mm) 5,500 5,938 Height (mm) 2,500 2,924 Collection volume Collection volume steel trough 1,560 litres Door arrangement short side Stainless Steel Door Handle with Anti-Panic Version 1 ST Technical ventilation fire protection system 1 ST Exhaust air monitoring 1 pc Door hold-open system  ...

Find more here - / Contact us at -

Key data: 6500 kN, 80 mm

Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...

Key data: 600 kN, 25 mm

Clamping force: 60t Year of Make: 2001 Injection Unit .../100 Screw diameter 25 mm Spec. Spray pressure 2240 bar Injection volume 49 cc Clamping unit 600/... Clamping force 60 t Size of the clamping plates 446 x 446 mm Lights spar spacing 320 x 320 mm Tool installation height 200 mm Opening way 350 mm Max. panel spacing 550 mm Weight 2440 kg Dimensions(m) LxWxH 3.6 x 1.6 x 2.2 m Year of construction 2001 Control type Selogica

Key data: 2000 kN, 55 mm

Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica

Manufacturer: Italpresse Model: BG/660 Year of Manufacture: 2002 Technical Specifications - Control Voltage: 220 V - Operating Voltage: 400 V - Frequency: 50 Hz - Phases: 3+MP+PE - Maximum Power: 108 kW - Maximum Current: 160 A - Cable Cross-Section (Supply): 70 mm2 - Static Load Capacity: 27,500 daN - Dynamic Load Capacity (with tooling): 36,000 daN Find more here - / Contact us at -

4 GENSET UNUSED X 6L27/38 MAN HYUNDAI – POT 2.111 KVA

Manufacturer: Elin Type: TDQ-632A01S5K-99 Category: 3-Phase Oil-Filled Power Transformer Year of Manufacture: 2001 Technical Specifications - Rated Power: 630 kVA - Cooling: ONAN (Oil Natural Air Natural) - Type: T (Oil-immersed) - Frequency: 50 Hz - Voltage Ratio: 12 / 1.1 kV - Vector Group: Dyn5 - Rated Voltage V1: 10,920 / 10,500 / 10,080 V (taps) - Rated Voltage V2: 420 V - Rated Current (HV): 34.65 A - Rated Current (LV): 866 A - Short Circuit Voltage: 3.77% - Short Circuit Duration: 2 seconds - Insulation Level: BS75 WS28/WS3 - Total Weight: 2,115 kg - Oil Weight: 0.285 t - Insulating Fluid: Technol US 4000 - PCB Content: less than 1 PPM - Max. Oil Temperature: 84 degrees C - Sound Pressure Level: 29 dB(A) Find more here - / Contact us at -

Offer 26113 Technical data approx.: - Operating hours ( read ) approx. 3093 h - Load capacity approx. 3500 kg - Lifting height up to approx. 3750 mm - Fork length approx. 1350 mm - Fork length hydr extended to approx. 2350 mm - Hydr tine adjustment min. / max. 510 to 1350 mm - Space requirement with forks approx. W 1450 x L 4200 mm - Overall height approx. 2690 mm - Weight approx. 7800 kg - hydr. Sideshift + hydr. Tine adjustment - hydr fork extension approx. 1000 mm - Work lights front + rear - Suspension seat with seat heating - Battery year 2020

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG

Laser Cutting Machine Manufacturer: Messer Type: Multilas 6020 Year of Make: 2001 CNC Control: Omnicom 160iL Working area: 2,000 x 6,000 mm Laser: Fanuc C4000 Laser power: 4000 W Connected load: 137 A

LINERS CYLINDER HEADS CONROD ROD PISTONS FUEL UNIT CRANKSHAFT CAMSHAFT BEARINGS All parts new, unused P

GLUING MACHINE, STORK, TYPE: ERT 630 Technical description: Bandwidht: 630 mm Material: Stainless steel Aisi 304 Power supply: 380/440 V - 50/60Hz Dimensions: 1500 x 1200 x 1800 mm

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same load. distributed load. 24x Shelf Racks, used suitable for slotted stands Material colour: sendz. ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Wire mesh shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight|pcs.: approx. 6,90 kg Note: Water permeable (up to 70%), suitable for sprinkler ...

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm

Key data: 5300 mm, 2200 mm

Panel Saw Striebig Type: Standard III TRK 6220 A Year of Build 2.98 T Cutting dimension 5300 mm x H vertical 2220 mm / H horizontal 2100 mm Motor power 4.4 kW Cutting depth maximum 80 mm Saw blade diameter 300 mm, min. 290 mm Saw blade bore 30 mm Saw blade speed 4,750 rpm. With center support rail Support rollers with locking mechanism Evasive slatted frame For wall mounting Good, ready-to-use condition Dimensions set-up: L 6665 mm x W 1426 mm x H 3015 mm Weight approx. 950 kg

Agilent HP 6890 Gas Chromatograph (G1530A) FID + G1888 Headspace Sampler + G1512A Controller + G1513A Autosampler Composition: Gc 6890 agilent Hewlett packard G1530A network headspace sampler G1888A Injection Turret 6890 - G1513A G1512A controller With software With accessories Without a computer Warning, equipment not tested Buy as is

Load capacity max. 600 kg, Platform size: approx. 750 × 1050 mm, Power connection: 380 V/50 Hz, The stack/pallet lift must be picked up at the location 77694 Kehl., Truck-loading ramp and/or forklift is available.

Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg

Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible.

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...

Size: approx. 3000x6000 mm, with control unit, own weight: 3500 kg

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested Equipment Without a computer Without software

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

- Drum length 5500 mm, diameter 2000 mm (as with Doppstadt SM 620) - Motor 15 kW - Control cabinet - Cleaning brush - Hole size of the drum according to customer requirements - New machine manufactured in Europe - Documentation and CE - 1 year warranty

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 € : 2740.5 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0.5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Net weight= 404 kg,

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Unused Alfa Laval disc centrifuge type HBPX 6000. Year of manufacture 2023. CE The centrifuge has never been connected and has not worked on production.

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz  ...

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.

Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg

Pastry line Seewer Rondo SPF 602 Condition: used, functional Year of Make: 2000 Calibration head, built in 1996 Cutting station Sprayer Filling station Guillotine Incl. cutting tools

Combi sheeter Seewer Rondo SKO 611 Year of Make: 2007 Condition: cleaned and tested 1 tape renewed Suitable for all types of dough (rolling out & touring) Stainless steel cladding With computer control Belt width: 635 mm Roller width: 670 mm Roller opening: 0.3 â€" 45 mm

Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device