frame 6 used for sale

Specifications Maximum pressure: 5.7 tons Pressing force: 1.18 kg/cm Bale size: 600x800 mm Bale weight: approx. 70 kg Power connection: 400V / 1.5 kW Year of Make: 2009 Productivity: approx. 3 bales/hour

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

URBAN AMS 6010 very good condition fully operational

Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

Lippert belt conveyor GF 4485-750-600 RA1667 Technical data: Conveying length (NL): 4485 mm Framework width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4485 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.

Auger 600mm for tractor drill Jansen TBG-200

Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Auger 600mm for tractor drill Jansen TBG-200

Auger 600mm for tractor drill Jansen TBG-300

4.80 m lifting height, 8000 kg lifting capacity, length: 3,840 mm, width: 1,800 mm, height: 2,550 mm, free lift: 1,400 mm, load capacity: 8 t at 600 mm LSP, with tine shifting and tine height adjustment

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

HANDTMANN VF 620 Filling, Portioning. Year 2002

Sorting/Cutting Table

Key data: 6500 kN, 105 mm

Location is : Latino America !

Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -

Two inserting machines are available. 1) Grützmacher Rubin C5, max. mechanical output: 7500pieces/h, envelope format range: C6-C5, min. insert size: 99mm/148mm, max. insert size: 148mm/210mm, max. filling thickness: 5mm. 2) Bell and Howell CEXP-6RC, year of manufacture: 2006, max. mechanical output: approx. 10000cycles/h, envelope format range: C6-C5, max. insert dimensions X/Y: 110mm/220mm. Machine dimensions X/Y/Z: approx. 2200mm/950mm/1250mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

max. wheel diameter: 600 mm gear width: 0 mm max. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mm diameter of hob: 290 mm cutter length max.: 470 mm tangential adjustment: 450 mm milling head -swivable +/-: 45 ° milling head speed: 15 - 380 U/min table rotation speed: 50 U/min milling spindle drive: 37 kW table diameter: mm table load: 3750 kg feeds: 2000 mm/min Control: Siemens 840D total power requirement: 115 kVA weight of the machine ca.: 31 t dimensions of the machine ca.: m - 6-axis CNC control Siemens Sinumerik 840 D - complete covering - counter stay - Coolant Unit - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Recon Part Number: 0407 0013 Water-cooled Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0407 0073 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1231 3035 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Recon Part Number: 1227 6065 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Net weight= 340 kg, net weight: ca. 340 kg electr. power: 230/400 V; 50 HZ power consumption: 1,6 kW condition: refurbished In stock Made in Germany Description Depositor Krumbein DSM is ideal for filling muffin tins silicone molds blisters cake base rings and much more dosing rollers and nozzles for different applications. Eausy to change and clean high mobility – the machine can be employed at various stages of production user-friendly menu controller with 64-programme memory space max. sheet pan width 600 mm 1600 mm x 1000 mm x 1600 mm

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

EBO 68 - 320 IS 600 Electrical deck Oven with 4 decks and proofer Dimensions: 4 x 60x80cm For 2 plates 60x40cm The Oven is complete stainless steel Easy to clean Power of 1 deck: 4.85kW Voltage: 400V / 50Hz / 3/N/PE

Manufacturer: MAN Model: TGA 28.320 6x2-4BL Year of Manufacture: 2007 Engine Power: 235 kW (320 HP) Fuel Type: Diesel Engine Capacity: 10,518 cm³ Axle Configuration: 6x2-4 Permissible Total Weight: 27,000 kg Permissible Axle Loads: - Axle 1: 8,000 kg - Axle 2: 8,000 kg - Axle 3: 11,000 kg Unladen Weight: 19,000 kg Gross Vehicle Weight Range: 27,000–26,000 kg Wheelbase: 3,500–3,050 mm Tire Sizes: - Front: 315/80 R22.5 - Rear: 385/65 R22.5 Body Type / Equipment: FAUN Powerpress 524 Special Features: - Müllwagen (Refuse Compactor Truck) - Equipped with FAUN Powerpress body system - Red reflectors on foldable components as per StVZO exemption - Noise class: EG Lärmarmer (low-noise vehicle) Find more here - / Contact us at -

Screw Diameter: 64 mm // Throughput: 480 kg/h

Aquila Technic TD404C-670 pressure washer, - with max. pressure 400 bar, - Flow rate: 37 l/m, - Dead weight: 1250 kg, - hz.Gg.: 2000 kg, - reparaturbedürftig

An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.

Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible.

Broaching machine Karl Klink Technical data can be found in the photo

An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.

pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

Manufacturer: PolyTECH Type: KVD 650 Year of Make: 1995

Table 6000 x 3000 x 400 mm Thickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

table length: Rohmateriallänge 6500 mm table width: Rohrdurchmesser max. 230 mm burner heads: 1 Control: CNC workpiece weight: 300 kg traversing speed: 91 m/min weight: 5750 kg dimensions of the machine ca.: 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding dev ...

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 900 kg traversing speed: 91 m/min dimensions of the machine ca.: 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling  ...

Key data: 800 KW, 938 kVA, 450 V

Make: Yanmar Model: 6N21L-EV Mfg. Date: 2006-09 Cont Rating: 800 KW Speed: 720 RPM Generator: Taiyo Mfg. Date: 2007-09 Model: GE45C-10 Output: 937.5 kVA Frequency: 60 Hz Volts: 450 V Qty: 3 #Yanmar #engine #generator #vessel #ship #marine #power #energy

General SKU422U1430 LocationBarneveld MakeMotan-Fuller TypeD6 250/10,5 CC No.5576 Year of construction2001 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter380 mm Specified Features - Rotating valve Rotary valve for air transportcheck Rotor diameter120 mm Rotor width350 mm Number of locks:9 InletDia. 380 mm Inlet flange sizes320x380 mm OutletDia. 80 mm Installation height360 mm With hoppercheck With motor0.75 kW, 220/380 volt, 1380 rpm Rotor speed26 rpm Air purged sealingscheck CapacityApprox 20000 l/h MaterialStainless steel 1.4552 Information Total height1,10 m Weight300 kg Floorspace0,80x0,80 m Extra SpecificationsWith hopper, dim. 650x660mm Rotating valvesMotanRotary valves > Rotating valvesBrand > Motan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...

General SKU422U1432 LocationBarneveld MakeMotan TypeD6 280/14CC No.1891 Year of construction1990 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter140 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valve for air transportcheck Rotor diameter120 mm Rotor width350 mm Number of locks:9 Lock sizes80x80x350 mm InletDia. 140 mm Inlet flange sizes380x320 mm Outlet80 mm Installation heighttotal 660 mm With motor0,75kW, 220/380 volt, 1380/26 rpm Rotor speed26 Air purged sealingscheck Capacityapprox 20000 l/h Information Total height0,66 m Weight110 kg Floorspace0,70x0,75 m Extra SpecificationsInput dia. 140mm, output 2x dia. 80mmRotating valvesMotanRotary valves > Rotating valvesBrand > Motan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU279W436 LocationBarneveld MakeDinnissen Type322-365-650 No.120282 Year of construction2012 Main Features MaterialStainless steel Motor3 KW Length365 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia. 200x365 mm Screw sizesDia. 150 mm Inlet240x250 mm Outlet2x 150 mm With inspection hatchcheck Motor3,0 kW, 400 V, 1415 rpm Speed700 rpm Air purged glandscheck With sieve cagecheck Sieve perforation5x5 mm MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height1,50 m Weight360 kg CEcheck Floor space1,72x0,63 m Extra SpecificationsWith level switch and butterfly valve for outlet.Rotating sievesDinnissenSieves > Rotating sievesBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

General SKU294W557 LocationBarneveld MakeSchwarz TypeLP 600/800 No.01-56738 Year of construction1999 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelsOn legs Floor space1,10 x 1,10 m Total height3,0 m Extra SpecificationsVolume 190 l. max pressure 10 bar. max temperature +2°C/+150°C Miscellaneous filtersSchwarzFilters > Miscellaneous filtersBrand > Schwarz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U599 LocationBarneveld MakeDriam TypeDriacoater 500/600 vario No.KD37310 Year of construction1995 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Coating pan MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Coating pancheck Coating installationcheck Capacitymax: 1: 77 Ltr., 2: 148 Ltr. Batch size30 kg Pan diameter1: 500 mm, 2: 600 mm Pan depth1: 460 mm, 2: 600 mm Cylindrical width1: 330 mm, 2: 470 mm Conical width1: 120 mm, 2: 120 mm In-/Outletdia. 200 mm Motor0,55 kW, 230/400 volt (EX) With frequency controllercheck (Typ VLT 2015) Pan speed5-27 rpm With electric heatingcheck With fancheck Motor2,2 kW, 380/660Volt, 2825 rpm (EX) With air filtercheck With spraying armcheck (Model 970) With dosing pumpcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight850 kg CEche ...

General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!