frako used for sale

Francis turbine, used 40 kW, 3 m³, height 2m Speed 106 / 375 RPM 69 HP, built in 1963 Generator Schorch GmbH Type KT 7315 s FB01 Z-Z 50 Hz, 512U/min 55kW

4 aluminium frames for meat hooks, length: (3x) 2900 mm and (1x) 4000 mm.

6 wall-mounted aluminium frames, dimensions: (6x) 520 mm x 40 mm x 1800 mm.

10 s/s wall mounted frames for smoke sticks, dimensions: (8x) 700 mm x 1700 mm and (2x) 700 mm x 1400 mm.

France transfo mobile transformer, type: NBN HD, serial number: 41 4886-01, year of construction: 2007, 400 V, 230.9 A, weight: 800 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

France transfo mobile transformer, type: NBN HD, serial number: 695430-01, year of construction: 2004, 400 V, 230.9 A, weight: 880 kg, 160 kVA, dimensions: 1200 mm x 800 mm x 1560 mm.

France transfo mobile transformer, type: NBN HD, serial number: 409976-01, year of construction: 2006, 400 V, 225.3 A, weight: 915 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

Used complete bottling line FRAMAX year 2016 Configuration and Versatility The complete 2016 FRAMAX bottling line is currently configured for 330ml long neck bottles As the line has been used to produce beer A notable aspect is the inclusion of interchangeable parts for taller Vichy bottles demonstrating the versatility of the line The availability of replacement components for 500ml and 660ml bottles further amplifies this flexibility This system is supplied with a set of interchangeable parts for larger bottles presumably 660ml but these have never been used Dimensions and Capping Capacity of the Used complete bottling line FRAMAX year 2016 A point of technical interest is the beer line s ability to handle different sizes of caps in particular the 26mm and 29mm formats Currently the cap configuration is set to 26mm with replacement components available for larger caps This flexibility  ...

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

liter capacity:21 l/min Pressure of coolant:50 bar rated current:20 A Clean water tank capacity:300 l total power requirement:16 kW weight of the machine ca.:200 Kg dimensions of the machine ca.:1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spin ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

Endmass Cary 1, Frank 0, Frank 1, Sel gr. 0, Sel gr. 1

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2005 Capacity: 35 m³/min Pressure: 40 bar incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2006 Capacity: 35 m³/min Pressure: 40-42 bar Electrical power: 355 KW incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

REF-371 FRATELLI INDELICATO ROTOFINISHER Fruit finisher (pulper and refining machine with adjustable pressing) Manufacturer: Fratelli Indelicato Model: Rotofinisher Applications: Designed to reduce the pulp content in citrus and tropical fruit juice Composed of two sieving bodies Power: 3kW Sieve dimensions: diameter-350mm, length-800mm Overall dimensions: l-1,600mm, w-1,300mm, h-1,700mm

Cylinder Albert Frankenthal, perforating and punching, Frame outer size: 42x59cm Frame size: 37,50 x 54cm, in good condition, immediately available

Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of manufacture: 2015, set up on 330 ml + 500 ml bottles, with depalletizer, labeling machine, self-adhesive labels, bottle transport, case sealer. Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2015, adjusted to 330 ml + 500 ml 0,33 + 0,50 glass bottles, with Depalletiser, Labeller Labelling machine, self adhesive labels, Bottle conveyors, carton sealer.

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

- Manufacturer: C.D.H FRANCE - Year of manufacture: 2003 - Machine type: M 220 V. - Power: 5 kW. - Voltage: 400 V 50 Hz. - Used machine.

TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box

TEKO composite system with 4 pcs. FRASCOLD compressor type S20.56Y With control box

Design: Machine base and plinth integrated in a steel housing, composit concrete interior, Steel sleeves on the floor for fixing Table: welded steel plate structure Manufacturer: Framag hydropol Model: 7447 Overall dimensions: 3700x3200x3600mm Weight: 22000kg

Test force: 250 kg checking height: 0-270 mm kind of tests:: Rockwell workpiece depth: 160 mm weight of the machine ca.: 88 kg dimensions of the machine ca.: 200 x 500 x 800 mm This hardness tester Frank 532 comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. - Table with manual adjustment - with precision dial indicator for direct reading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-chamber spray cleaning system FRANKE SRF-1000 l-RRS - Year of construction 09/2001 - 3 tanks -Stainless steel - Thermal insulation of the system - Spraying system arranged on all sides - Spray pipes with nozzle loading - Thermostatic heating control - Overheating protection for heaters - Level monitoring - Steam extraction fan - Removable filter basket - Lifting door with electromechanical drive - PLC control - SRF with special usable height and sliding door as well as transverse transfer carriage - Cleaning medium: water-soluble, non-flammable cleaners - Usable dimensions 1450x1450x1000 mm – 1000 kg - Electrical connection 3x 400 V 50 Hz + PE + N - Compressed air connection 6 bar - Fresh water connection 1/2" - Transport data System 3050x2200x3000 mm – 3000 kg Cart 1100x1150x300 mm – 45 kg Transverse sliding device 3800x1200x930 mm – 60 k ...

Frampton Grill Belt width: 800 mm Belt length: 10000 mm 180 kW

Frampton FR1-3 Flash roaster Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph

Servo valve, hydraulic valve HYDRAULIQUE CHATEAUDUN (FRANCE) Type: D 080 211-9 Model: 0 080 (BJ) R 03-99 121 NT 5510302 nom 100 l/min

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Frampton ST-2-3-P conveyor grill Stainless, two tier conveyor oven, belt dimensions 2800mm x 450mm, variable speed, digital temp controls, 20Kw, mobile, 3Ph

Stainless steel sink, Fabr. Frank

2 x Franz Müller Cord slitting Machine with Brushing in Best condition. with Huge needle and spareparts .

Manufacturer: Franke, Type: Beschlagbohrmaschine MInifix, Function: Beschlagbohren und Setzen, Work piece width min-max mm: 30-1200, Min.-max. workpiece length in mm: 150- ca.1700, Min.-max. workpiece height in mm: 10-40, Magazin for hinges!: Minifix, Set buffer: no, Working range X: 1700, Working range Z: 25, Drill gearings: 2, Drilling supprt from bottom: 2, Drill gearings: 2, Drill gearings: 2, Number of spindles: 2 + 2, Tool exchange places: yes, FREE TEXT: für leichtes rüsten Anschlag Arretirung all 16 mm,