four side used for sale

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

planing width: 30-260 mm planing height: 10-200 mm number of spindles: 6 Weight: 6650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about  ...

Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...

Key data: 5 , 230 mm, 120 mm

5-spindles automatic planer with grooved table WEINIG PROFIMAT 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentat ...

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

Key data: 7 , 170 mm, 140 mm

Four-sided planer Weinig Type: U 17 A Year of Make: 1979 Planing width 170 mm Planing height 140 mm Dressing table 1960 mm long 7 Waves: 1. Bottom 4kw 2. Right 3 kW 3. Left 4 kW 4. Right 4 kW 5. Top 5.5kw 6. Bottom 4kw 7. Universal 4 kW Feed speed max. 18.5 m/min. with manual Waxilit pump well-functioning condition

Number of spindles: 6 St. Working width: 15 - 250 mm Working height: 10-200 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ------------------------------------ - Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9 Touchscreen Manufacturers Description (Summary): ------------------------------------ 1st Spindle: HORIZONTAL BOTTOM ------------------------------------ Siemens IE3 motor with inverter brake: 7.5 kW D ...

Weinig H25 high-speed automatic planing and moulding machine for four-sided planing and profiling of wet timber (freshly sawn) The photographs show the machine’s current condition. Among other things, a number of original new Weinig parts have been fitted, and the tables and stops have been sanded down and recoated. Further new parts are required to complete the machine. These will be ordered upon receipt of an order, taking the customer’s requirements into account. The control panel is for testing purposes only and is temporary. Technical data: Spindles: 5 Working width: 250 mm Working height: 160 mm Spindle 1: Bottom (7.5 kW) Spindle 2: Right (11 kW) Spindle 3: Left (11 kW) Spindle 4: Top (15 kW) Spindle 5: Bottom (tba) Hydraulic feed: 15 kW Powered table rollers: Yes Table tops: Resanded and recoated (hardened) Condition: Gebraucht Location: Tauberbischofsheim, Germa ...

Weinig Guilliet KXY automatic planing and chamfering machine for planing timber on all four sides, in very good original condition and including planing heads. Technical data: Spindles: 4 Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Working width: 180 mm Working height: 120 mm Feed rate: approx. 10 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring the ATS system and reinforced Technical data: Spindles: 6 Spindle 1: Bottom / 40 mm / 7.5 kW / 8,000 rpm Spindle 2: Right / 40 mm / 7.5 kW / 8,000 rpm Spindle 3: Left / 40 mm / 7.5 kW / 8,000 rpm Spindle 4: Top / 40 mm / 7.5 kW / 8,000 rpm Spindle 5: Bottom / 40 mm / 7.5 kW / 8,000 rpm Spindle 6: Universal / 40 mm / 7.5 kW / 6,000 rpm Working width: 230 mm Working height: 160 mm Powered table roller: 1 Feed rate: 24 m/min Feed motor: 4 kW Dressing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 universal planing and moulding machine for four-sided planing and profiling of timber. Includes a sawing package for cutting timber using the 4th and 5th spindles. Technical data: Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Working width: 230 mm Working height: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, including a set of planing heads. Technical data: Spindles: 5 Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom Working width: 230 mm Working height: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring five driven rollers in the table and a universal spindle. Technical data: Spindles: 7 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / 11 kW / 40 mm Spindle 4: Right / 7.5 kW / 40 mm Spindle 5: Top / 11 kW / 40 mm Spindle 6: Bottom / 5.5 kW / 40 mm Spindle 7: Universal / 5.5 kW / 40 mm Working width: 230 mm Working height: 160 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 5.5 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Unimat 23E automatic planing and moulding machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Technical data: Spindles: 6 Spindle 1: Bottom / 50 mm / 5.5 kW Spindle 2: Right / 50 mm / 11 kW Spindle 3: Left / 50 mm / Shared motor with spindle 2 Spindle 4: Top / 50 mm / 5.5 kW Spindle 5: Top / 50 mm / 5.5 kW Spindle 6: Bottom / 50 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Planing table length: 2,500 mm Feed: 5.5 kW Axial stroke of vertical spindles: 80 mm Axial stroke of horizontal spindles: 45 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min Dimensions (L/W/H): 4700/1800/1100 mm weight: ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ------------------------------------------ 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information accor ...

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2000 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2 - 12 m/min. Control: Memory Funktion 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ---------------------------------------------------------------------- -------- Machine will be cleaned and functionally tested before delivery ! Technical manufacturers description: -------------------------------------- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom --------------------------------------- Motor with brake: 5.5 kW Diameter 40 mm Speed 6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----------------------- ...

Number of spindles: 5 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ------------------------------- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm Th ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 8 ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ------------------------------------ Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) -------------------------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 m ...

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. control: MemoryPlus Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. control: Powercom Weinig Powermat 500 (Window Version for window producers) -------------------------------------------------------- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ---------------- ...

Weinig Powermat 1000 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle layout: Down 7.5kw Right 5.5kw (power lock) Left 5.5kw Right 5.5kw (power lock) Mount 11kw (power lock) Down 15kw Top 7.5kw (power lock) Down 7.5kw All spindles 8000r.p.m Inverter-adjustable feed speed up to 30m/min Electro-motorized positioning of the working height and width Weinig power com system Pneumatic Material Clamps 2 smooth rolls in a working balat Worktop length 1970mm Carda shaft drive Net price

Weinig Powermat 1000 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle layout: Down 7.5kw Right 5.5kw (power lock) Left 5.5kw Right 5.5kw (power lock) Mount 11kw (power lock) Down 15kw Top 7.5kw (power lock) Down 7.5kw All spindles 8000r.p.m Inverter-adjustable feed speed up to 30m/min Electro-motorized positioning of the working height and width Weinig power com system Pneumatic Material Clamps 2 smooth rolls in a working balat Worktop length 1970mm Carda shaft drive Net price

Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 5–24 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany

Key data: 4 , 230 mm, 150 mm

Four-sided planer Weinig Type: Q 22 Quattromat Year of Make: 1990 Planing width 230 mm Planing height 150 mm Length of dressing table 1960 mm 4 shafts: 1 Bottom 4 kW 2 on the right and 3 left driven by 1 motor 5.5 kW 4 above 5.5 kW Feed speed 6 - 22 m/min. Feed cardan, feed motor 2.2 kW Lubricant pump manual With soundproof hood Including planer heads 2 pieces length 230 mm 2 pieces length 150 mm Weight with substructure 1,620 kg Dimensions 3350 mm x 1450 mm x H 1600 mm

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Down 7.5kw 7.5kw rights Left Mount 7.5kw 11kw pit Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pull roller clamps Electric pressure beam adjustment Input table length 1970mm Table top lubrication system Year of manufacture 1999 Machine dimensions 420x180x189cmH Machine Weight: 3200kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - The machine renovated and functionally checked ! Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5  ...

Number of spindles: 5 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ------------------------------- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter  ...

Number of spindles: 5 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min. Weight: ca. 3500 kg control: SCM Control 10 SCM Superset NT with workpiece return ---------------------------------- The machine is in cleaning and completely checking process at the moment. Brief Summary: ---------------------------------- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ---------------------------------- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ---------------------------------- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ---------------------------------- First left vertical spindle Motor with bra ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left -------------- ...

Number of spindles: 9 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 7,5 kW Working speed: 6-36 m/min weight of the machine ca.: 6500 kg Control: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock ------------------------------------------------------------ Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM Set-up - SCM T-Set - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions o ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------ ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ------------------------------------- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ---------- ...

Number of spindles: 6 St. Working width: 240 mm Working height: 200 mm Length of the planing table: 2500 mm Feed speed: 6-36 m/min. Dimensions (L/W/H): 4900x1700x2000 mm weight of the machine ca.: 3500 kg Control: SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----------------------------------------------- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: app ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Weinig Unimat 300 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle layout: 1.Down 5.5kw 2.Left 3.11kw rights 4.Top 5.5kw 5.Down 4kw Feed speed adjustable by inverter up to 12min/min Pneumatic Clamps Net price

Number of spindles: 5 St. Working width: 250 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With three feed shaft extensions for wide wood with additional steel toothed feed wheels. The air pressure of the front and rear steel feed wheels can be infinitely regulated from 0 bar to 6 bar. Digital adjustment in height and width and readout of 100-200 programmable planing dimensions. Tersa planer heads with 4 quick-change blades per head. Automatic oscillation of the width axis for falling widths of wood. 4 to 25 m/min Infeed table 2,000 mm long, with extra pressure pieces for thin wood, and extensions for the infeed shafts. Spare set of feed wheels, 2x spare belts, 2x spare gas springs. The preset planing width sizes can sometimes have a deviation of max. 0.2 mm. At the pendle axle, the light-sensitive eye does not work properly. This is solved by bridging the eye with the on/off switch H. The pendle axle is completely in order and automatically goes out when you press wood ...

Number of spindles: 6 St. Working width: 230 mm Working height: 140 mm Feed motor: 4 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.