four side used for sale

🚧 360 sqm wall formwork †available, ready to use, immediately deliverable Need formwork on short notice? This is exactly the package. No waiting times, no sourcing hassle †complete, available, and ready to go .   🔥 Why this package? 360 sqm formwork in one lot → ideal for active projects mostly 3.0 m panels (1000x3000) †standard jobsite size MODALU system by Jean Four †modular, robust, proven incl. connection material → no additional sourcing needed used condition, but ready for immediate use location: France   🧰 Flexible setup 👉 Additional accessories available on request †easy to adapt to your project needs.   ⚡ Only one package available ⚡ No split sale †first come, first served   🚀 Bottom line  ...

Consists of: collection of four English stationary engines – Lister & Ruston & Hornsby (ca. 1923–1941), three engines from R.A. Lister & Co. Ltd. from Dursley (Gloucestershire, England) and one engine from Ruston & Hornsby Ltd. from Lincoln (England), (1. R.A. Lister Type A, manufacturer: R.A. Lister & Co. Ltd., Dursley, England, type: A, specification: 10, power: 21/2 HP, speed: 600 RPM, serial number: 37212, probable year of manufacture: ca. 1923–1924, single-cylinder four-stroke petrol engine, hopper (open water cooling), original flywheels, original fuel tank, muffler present, chain drive to the ignition, mounted on transport chassis), (2. R.A. Lister Type B, manufacturer: R.A. Lister & Co. Ltd., Dursley, England, type: B, specification: 14A, power: 21/2 HP, rpm: 600 RPM, serial number: 50688, probable year of manufacture: 1925 (autumn), single-cylinder four-stroke, hopper cool ...

This Oak shelf is intended as a wall-mounted surface for a small surface-mounted fountain. On the left side is the recess for the drain of the fountain. The shelf is specifically suitable for the 20 cm surface-mounted fountain from Wiesbaden. The fountain itself is not included. A recess has been made at the front that can be used as a towel holder. A tap hole is not fitted as standard; Depending on the chosen faucet, this can be applied yourself. The item is sold on an \"as is\" basis (As-Is), and as described. The lot description is leading for the content; Any accessories, decorations or other items depicted that are not mentioned in the description are not part of the lot. Auction-ID: A1-49250-262

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost -Dimensions: Ø 190 x 65 mm -Weight: 8 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Number of spindles: 5 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ------------------------------- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm Th ...

2x - Ideal Standard compact ceramic fountain from the Ideal Standard Tiempo series. Equipped with one tap hole on the right side and without overflow. The fountain has dimensions of approximately 370 x 210 x 120 mm and is suitable for use in toilet rooms and other compact sanitary spaces. The model can be combined with the Tiempo fountain furniture R0271. Excluding tap and other connection materials, unless otherwise available. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-21

Compact corner fountain from Differnz from the Cleo series. Made of dark gray concrete with fiberglass reinforcement and a water-repellent coating. Thanks to the space-saving corner model, this fountain is suitable for small toilet rooms and guest toilets. Without a tap. Note: minor damage to one of the fountains (see photos). The tap hole is located in the corner of the fountain. Excluding faucet, siphon and drain plug. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-91

2x - Geberit compact fountain suitable for use in toilet rooms, guest bathrooms and other small sanitary spaces. Made of white sanitary ceramic and equipped with one tap hole on the right side and an integrated overflow. The fountain is suitable for wall mounting and can be combined with various siphons and fountain taps. Dimensions approximately 36 x 25 x 14.5 cm. Excluding faucet, siphon, drain plug and mounting material. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-20

Apple Engineering Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable -Weight: 39 kg

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 60 mm -Hole circle: Ø 170 mm -Weight: 9.3 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg

BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT  ...

Intermediate plate for column jib crane, crane foundation plate, overhead crane, workstation crane, crane foundation plate -Column jib crane: Intermediate plate/base plate, outer diameter: Ø 1050 mm -Thickness: 50 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Empty weight: 676 kg

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workstation crane, crane foundation plate -Pillar jib crane: intermediate plate/base plate, outside: Ø 1050 mm -Thickness: 40 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Own weight: 576 kg

Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple -Manufacturer: LAUDI GVE -Type: Four-rope orange peel grapple type 6.3 m³ -Condition: unused -Accessories: 3 replacement arms for the gripper, see pictures -Max. payload: 5600 kg -Height of the closed gripper: 3400 mm -Height of the open gripper: 3900 mm -Width of closed gripper: 3380 mm -Opening width: 4660 mm -Rope length in closed gripper: 8600 mm -Rope length in the open gripper: 17250 mm -Transport dimensions disassembled: 2460/5020/H2500 mm -Weight: 5500 kg

Magnetfundamentplatten / Flint Magnetic Foundation Plate Heidelberg OHT / GT Flint Magnetic Foundation Plate Heidelberg OHT / GT

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Wall fountain from the Wiesbaden Rhea Mini series, executed with the tap hole on the left side. The fountain has one sink and is equipped with a round drain hole of 50 mm. There is no landing. Faucet, siphon, drain plug and mounting material are not included as standard. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-83

Fountain siphon for washbasins and fountains with a connection of 5/4\" x 32 mm. Made of brass with a brushed bronze copper finish. The low model is suitable for visible mounting under a fountain or washbasin. Supplied with wall pipe and rosette. The height is adjustable up to approximately 8.5 cm. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-213

2x - Differnz compact wall fountain suitable for toilet rooms and smaller bathrooms. Made of ceramic with a glossy white finish. Equipped with one tap hole on the left side and suitable for wall mounting. The fountain has a rectangular shape with dimensions of approximately 38.5 x 18.5 x 9.5 cm. Excluding tap, siphon and drain. Delivery in accordance with existing content. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-14

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

Doka four-way head H20 - galvanized Ceiling support head for the support and stabilization of doka formwork carriers. Weight 4kg Length 25cm Width 20 Height 33 Doka 4-way head H20 - galvanized Floor-prop head for supporting and stabilising Doka formwork beams. Weight: 4kg Lenght: 25cm Width: 20 cm Height: 33 cm

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Four-sided planer with tools 7 chillers

Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

K240/12 nabertherm . Foundry machines furnace, ovens Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand

Key data: 6 , 230 mm, 150 mm

I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified