four side used for sale

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore Air ...

Pressure total: 2000 ton Stroke: 1500 mm Daylight: 2000 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 100 - 600 ton Die cushion stroke: 400 mm Die cushion pad area: 4000 x 1800 mm Cushion pressure in ram: 50 - 300 ton Approach speed: 200 mm / sec Working speed: 20 - 30 mm / sec Return speed: 200 mm / sec Oil volume: 5000 l Required power: 2 x 250 kW Weight of machine approx.: 360 ton

Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

5.5 kW, slot 260 x 260 mm. With or without conveyor belt possible

power capacity: 0,18 kW volt: 400/230 V ampere: 0,6/1,05 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details Manufacturer: Ho Hsing Machinery Co., Ltd. Model: RB50-5BU Type: Side channel blower / ring compressor Quantity: 3 units Country of origin: Taiwan Power: - 1.50 kW @ 50 Hz - 1.75 kW @ 60 Hz Voltage: - 200–240 / 345–416 V (50 Hz) - 208–275 / 380–480 V (60 Hz) Phase: Three phase Protection class: IP54 Maximum air flow: - 3.5 m³/min @ 50 Hz - 4.2 m³/min @ 60 Hz Maximum pressure: - +3.2 psi @ 50 Hz - +2.9 psi @ 60 Hz Configuration: - Oil-free regenerative blower design - Industrial motor drive - Integrated cooling fins - Heavy-duty mounting base Application: - Central vacuum systems - Textile machinery vacuum supply - Pneumatic conveying - Packaging machinery - Industrial air transport - Garment production systems - Process air supply Condition: Used Observed condition: - Three units included - Housing appears intact - Cooling ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steinbock Boss Type 556/MK5B-3 side-loading forklift for the efficient transport and stacking of long loads, pallets and wood-based materials in confined storage and production areas. Its robust construction ensures safe handling even with heavy loads. Ideal for sawmills, timber merchants and industrial manufacturing. Technical data: Load capacity: 5,000 kg Lifting height: 3,300 mm Centre of gravity: 600 mm Engine: Diesel Fork length: 1,200 mm Steering: hydraulic Operating hours: approx. 2003 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Second-hand, double-sided, freestanding cantilever racking designed for the storage and organised retrieval of long goods and materials. The structure is suitable for professional use in warehouses and industrial premises. Technical data: Length: ~ 6,000 mm Arm: 650 mm Height: 3,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

General Description Heavy-duty industrial hydraulic press with a nominal pressing capacity of 1,200 tonnes . The machine features a massive straight-side / H-frame construction with guided moving slide and is designed for heavy metal forming, pressing, punching and similar industrial fabrication operations. Technical Details Machine type: Heavy-duty hydraulic press Nominal pressing force: 1,200 t Straight-side / H-frame construction Large hydraulic ram / cylinder assembly Guided moving platen / slide Heavy-duty T-slotted working table Substantial die / tooling assembly installed Hydraulic power equipment Push-button operator controls Heavy bolted steel frame construction Condition Used industrial condition. The press appears substantially complete and remains installed with hydraulic equipment, moving slide, working table and tooling present. The main frame and guides  ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Workpiece thickness: 8 - 60 mm Workpiece overhang: 38 mm Edge material of the roll: 0.4 - 3 mm Edge material in strips: 0.4 - 6 mm. Min. workpiece width: 70 mm (with thickness 8-22 mm), 120 mm (with thickness 23-40 mm), 150 mm (with thickness 41-60 mm) Feed speed: 11 m/min Machine equipment: Joint milling unit, 2 x 2.2 kW motor Gluing unit with workpiece edge preheating Pressure zone with driven main pressure roller and 2 non-driven pressure rollers Hood unit, 2 x 0.18 kW, pneumatic adjustment phase/straight Radius and fine milling unit, 2 x 0.27 kW Form milling unit 1 x 0.35 kW Profile scrapers Glue joint scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

4 Edge Sealed Pouch Machine Manufacturer: Harro Höfliger Type: BRT II 120 L Year of Make: 2005 Fully automatic horizontal machine for 3-edge and 4-edge sealed bags for filling and packaging powdery products in double-bag operation (with perforation): Format range double bags (W x H) min. (2x50) x 50 mm, max. (2x80) x 260 mm Capacity max. 100 double bags/min (depending on bag size) Screw dosing SD 70/2 for double bags Main dosage min. / max. 2.5 – 90 g per sachet Microdosing min. / max. 0.3 – 5 g Max. roll Ø 600 mm Core Ø 76 mm Max. roll width 520 mm Gluing table with glue spot detection 2 pcs Allen Coding 5-line thermal transfer printers, individually switchable Longitudinal and Transverse Seam Heat Sealing Tool, Head Heat Sealing Tool Sealing stations manually adjustable Printing Mark Control Tearing aid by insertion needle Bag Inflation Device Bag op ...

Used side channel compressor (ring blower) with directly coupled Siemens electric motor, mounted on a common base plate. The system is designed as a pneumatic high-performance pump and is suitable for industrial compressed air and vacuum applications, e.g. in food, chemical or process technology. The device is used and has clear soiling and deposits on the surface due to use. Mechanical damage is not recognizable. Scope of delivery: 1 side channel compressor with Siemens motor 1 black intake silencer (mounted) Machine type: Side channel compressor / ring blower Motor manufacturer: Siemens System description: VWB Kompl. HFM5 Pneumatic High Performance Pump Plant No.: 151505-0000 Inventory No.: 1076515 ― Length: approx. 110 cm Width: approx. 60 cm Height: approx. 70 cm Weight: approx. 175 kg Auction-ID: A7-49816-223

HBM 250 mm. Circular Saw Table With 2 Side Tables 2000 Watt Auction-ID: A1-40897-213

Auction-ID: A1-40311-38

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/mJdlsZsA8YY - Former Linde full-service device - Battery: 24/2023 24V 465Ah, very good performance measured with 25.58V - Load capacity: 1,000 kg - Duplex mast with full free lift - Free lift: 1,700 mm - Fork length: 1,150 mm - 3rd valve; integrated sideshift - Load protection grille (can be easily dismantled) - Net weight: 2,100 kg - Foot brake without function Auction-ID: A1-50006-534

WANNER granulator / side mill C17.31SV – built in 2006 For sale is a well-preserved and fully functional WANNER side mill type C17.31SV, built in 2006, for use in plastics processing. The machine was used to shred sprues and plastic production residues and works perfectly. The good condition of the knives is particularly noteworthy. They show no chipping or damage. Since comparatively gentle material was mainly used, there are only minor signs of use. Technical data / condition: Manufacturer: WANNER Type: C17.31SV Year of Make: 2006 Motor power: 4 kW Connection: 400 V Grinding chamber opening: approx. 170 × 310 mm Rotor diameter: approx. 220 mm Knife in good condition No chipping or damage to the blades Fully functional Clean and well-maintained overall condition No significant damage Ideal as an auxiliary mill on injection moulding machines for the direct reprocessing of sp ...

With 3-part mast With freelift With side shift With spoon adjustment With suspension seat With power steering With good ties With good battery Leak-proof Viewing by appointment! Auction-ID: A1-40311-128

With 3-part mast With freelift With side shift With power steering With good ties With good battery Leak-proof Viewing by appointment Auction-ID: A1-40311-142

5 valves Auction-ID: A1-40311-174

Strong and reliable Kalmar DC12-600 diesel forklift, ideal for heavy material handling, logistics and industrial applications. With a lifting capacity of 12,000 kg at 600 mm load centre and a lifting height of 3.5 metres, this machine is perfectly suited for moving heavy loads. Equipped with hydraulic fork positioner and side-shift, making precise and efficient work easy. The robust construction and powerful powertrain make this Kalmar an excellent choice for intensive daily use. Specifications: • Lifting capacity: 12,000 kg @ 600 mm • Lifting height: 3,500 mm • Diesel engine • Fork positioner • Side-shift • Robust industrial design • Immediately deployable Auction-ID: A1-40311-11

Auction-ID: A1-40311-2

With 3-part mast With freelift With side shift With suspension seat With power steering With good ties With good battery Leak-proof Viewing by appointment Auction-ID: A1-40311-126

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-47444-70

Viewing by appointment! Auction-ID: A1-40311-42

Longwall board 3750mm long, camera system Complete with charger! Viewing by appointment Auction-ID: A1-40311-7

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-47389-283

AP VDC 1400 feed dosing container – 2001 – two-sided unloading Specifications: Brand/type: AP VDC 1400 Year of construction: 2001 Serial Number: 1011471 Capacity: approx. 1,400 litres Chaining: two-sided, left and right Drive: hydraulic Version: two free-rotating augers Security: shear bolt protection Features: Two free-rotating augers for dosing and distributing various feed products Shear bolt protection to protect against overload Jack suspension where the jacks rotate freely from the ground Execution for spill-free operation Hydraulic hoses and connections CE marking Particularities: The feed dosing container is sold as shown. Forklift available for loading. Loading dock available. Auction-ID: A1-47389-209

Auction-ID: A1-40311-39

4th function to carriage Auction-ID: A1-40311-97

5th function to carriage Auction-ID: A1-40311-21

With 3-part mast With freelift With side shift With power steering With good ties With good battery Auction-ID: A1-40311-67

Closed cab. Viewing by appointment! Auction-ID: A1-40311-107

With 3-part mast With freelift With side shift With suspension seat With power steering With good ties With good battery Leak-proof Viewing by appointment Auction-ID: A1-40311-143

Auction-ID: A1-40311-32

Ravas weighing system Battery of 2019 Viewing by appointment Auction-ID: A1-40311-121

Battery of 2023 Auction-ID: A1-40311-93

Battery of 2023 Viewing by appointment! Auction-ID: A1-40311-120

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-47360-84