four column press used for sale

grinding length: 6000 mm grinding width: 2200 mm workpiece height: 2000 mm column daylight: mm table surface area: 6000 x 2200 mm table speed -stepless-: 2 - 50 m/min workpiece weight: 15 t adjustment speed of cross-rail: 560 mm/min grind. wheel dimensions for face grinding: 63...200 mm grind. wheel dimensions for peripheral grind.: 315x50x76 mm grind. wheel dimensions for peripheral grind.: 400x40x127 mm adjustment range - horizontal: 500 mm swival range +/-: 60 ° total power requirement: 86 kW total wight: 130 t dimensions of the machine ca.: 22x7x4 m weight of the machine ca.: 56 t - Digital Read Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.

An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible.

Replacement column for IDRA 2500, extendable, D300mm x 7360mm, (1), 181091, Idra, refurbished Special price Replacement column for IDRA 2500, D300mm x 7360mm,Trapezoidal thread 300 x 10, 4082 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Idra, refurbished Special price Replacement column for IDRA 2500, D300mm x 7115mm,Trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Idra, new Special price Replacement column for IDRA 2500, D300mm x 7115mm, Trapezoidal thread TR300 x 10, 3944 kg New! The column has been produced from Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, extendable, D330mm x 7410mm, (4), 240186, Idra, refurbished Special price Replacement column for IDRA 3300, D330mm x 7410mm, Trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, extendable, D330mm x 7350mm, (5), PR11708354, Idra, refurbished Special price Replacement column 5 for IDRA 3300, D330mm x 7350mm, Trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column has been overhauled by Druckguss Service, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, Idra, refurbished Special price Replacement column 6 for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Idra, refurbished Special price Replacement column for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Idra, used Special price Replacement column for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. This column is therefore being sold at a very favourable price. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

bore capacity in steel (diameter): 32 mm throat: 265 mm bore stroke: 150 mm taper MK: 3 MK table-size: 390 x 390 mm feeds: mm/U turning speeds: 100 - 3300 U/min total power requirement: 1,5 KW weight of the machine ca.: 0,35 t dimensions: 0,8 x 0,6 x 1,95 m Unused display machine with: - Thread cutting attachment - Variable spindle speed - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flott Mk3

taper MK: 4 feeds:: ja weight of the machine ca.: 1,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 230 mm bore stroke: 130 mm taper MK: 4 MK table-size: 400 x 315 mm feeds: mm/U turning speeds: 105 - 1257 U/min total power requirement: 2,55 KW weight of the machine ca.: 0,35 t dimensions: 0,8 x 0,6 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.

bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 180 mm spindle turning speed range: 25-640 U/min column diameter: 180 mm table-size: Ø ca. 560 mm surface area: Ø 445 mm feeds: 0,1, 0,2, 0,3 mm/U spindle taper MT: 4 weight of the machine ca.: 1 t dimensions: ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante NICOLÁS CORREA Modelo L30-43 Año 1998 CNC HEIDENHAIN TNC 426 PB Superficie de la mesa 6.120 x 1.000 mm Peso Admisible sobre mesa 20.000 Kg. Recorridos (X/Y/Z)) 4.300 mm Avance Rápido Ejes 12.000 mm/min Avance Máximo de Trabajo 5.000 mm/min Cabezal de Giro Automático 2. 5º – 2. 5º Cono Cabezal ISO-50 Potencia Motor Principal 30 kW Gama de Revoluciones 20 – 3.000 r.p.m. Cargador Automático Herramientas INCLUIDO Posiciones en cargador de htas. 40 Equipo de Taladrina con sistema de filtrado de papel INCLUIDO Volante electrónico portátil HEIDENHAIN HR-410 Peso de la Máquina 28.000 Kg.

Fabricante NICOLAS CORREA Modelo L30/58 Año 1999 CNC HEIDENHAIN TNC 430 D Mesa Superficie de la mesa 6.120 x 1.000 mm Peso max permitido sobre mesa 20.000 kg. Recorridos y avances Longitudinal (Eje X) 5.850 mm Transversal (Eje Y) 1.200 mm Vertical (Eje Z) 2.000 mm Avance rápido ejes 12.000 mm/min Avance max. de Trabajo 5.000 mm/min Cabezal Cabezal de giro automático 2. 5º – 2. 5º Cono cabezal ISO-50 Potencia motor principal 30 kW Gama de revoluciones 20 – 3.000 r.p.m. Equipamiento Cargador automático merramientas INCLUIDO POsiciones en almacén de herramientas 60 Volante Portátil HEIDENHAIN HR-410 Evacuador viruta INCLUIDO 4 mesas supletorias INCLUIDO Preparación oara 4º Eje INCLUIDO Refrigeración interna 20 Bar INCLUIDO Equipo de taladrina con sistema de filtrado de papel INCLUIDO Otros Peso de la Máquina 31.000 kg. Potencia total instala ...

bore capacity in steel (diameter): 25 mm throat: 220 mm bore stroke: 110 mm taper MK: 3 MK table-size: 350 rund mm feeds: mm/U turning speeds: 100 - 2080 U/min connected load frequency: 400 V total power requirement: 0,9 KW weight of the machine ca.: 0,2 t dimensions: 0,8 x 0,6 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mm weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column-mounted jib crane, Vetter, 1,500kg, 6m boom, 6m high – unused - : Price from location: only 13.950.-€ (net)! Manufacturer: Vetter Type Master M Year of Make: 2022 Load capacity P: 1500kg M15-6.0 Column-mounted jib crane designed in accordance with the EC Machinery Directive, EN 13001 and VDE regulations, for outdoor use 4 Beaufort (20 – 28 km/h; moderate breeze). Identification number: 50010400 EN 13001 HC2 S3 HD2 Swivel range SB: 360° ∞ Max. permissible Hoist weight Gk 180kg Max. permissible Hoist speed VH 16m/min Projection A 6000mm Bottom edge boom UK 6000mm Overall height B 6470mm Bolt circle diameter DL 630mm Flange Outer Diameter DF 710mm Beam flange width F 180mm Approach dimension Aa 250mm Approach dimension Ai 915mm Pressure Column Length B1 1540mm max. vertical force Vk max. 32kN max. moment Mk max. 11575kNcm Weight 1756kg Operating ...

Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.

Hydraulic cylinder with 4 guide columns, BSE 250.40/25.01.4.201.400, Merkle, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, Technical information: - Double-acting hydraulic cylinder with 4 guide columns - Merkle BSE 250.40/25.01.4.201.400, - Piston diameter 40mm, piston rod diameter 25mm - Max. stroke 400mm, max. 250bar 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. O ...

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

Technical data: Installed power: 0.58 kW Voltage: 380 V Spindle speed: max. 3000 rpm

taper MK: 1 bore capacity in steel (diameter): - mm weight of the machine ca.: 140 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

type ABUS VS - 1000/5,0 (406) Overall height 3.65 m Lower edge height 3.30 m Column diameter stlpa 406 mm Projection 5,000 [mm] Hook travel 2,900 [mm] Btto 941 [kg] Swivel 360 [°] Chain hoist ABUS GM 3, lifting speed 1/4 m/ min, cat motor. Powered Original crane book with inspections Last test 2025 new paint job Column RAL 7038 light grey Boom RAL 1007 - daffodil yellow current price - new 10.580 eur -without packaging, transport and VAT. - Pictures - original condition before overhaul

Column jib crane, overhead crane, workstation crane -Manufacturer: VEB, Column jib crane, lifting capacity 250 kg -Base plate: 440 x 440 mm -Projection: 1,800 mm -Total height: 2,700 mm -Hook height: 2,490 mm -Chain hoist: VEB Type 250F -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Transport dimensions: 2530/800/H440 mm -Weight: 272 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Intermediate plate for column jib crane, crane foundation plate, overhead crane, workstation crane, crane foundation plate -Column jib crane: Intermediate plate/base plate, outer diameter: Ø 1050 mm -Thickness: 50 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Empty weight: 676 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: 800 x 800 mm -Load capacity: 1000 kg -Chain hoist: SWF type SKB 080.22-FND, year of manufacture 2008 -2x lifting speed: 4.0/1.0 m/min -Reach: 2100 mm -Total height: 2630 mm -Hook height: 1980 mm -Swivel range: 270° -Transport dimensions: 800/2640/H1500 mm -Empty weight: 458 kg

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Key data: 35 mm, 280 mm, 180 mm

Column drilling machine ALZMETALL AB 3 ES – Powerful & immediately ready for use For sale is a high-quality column drill from the renowned manufacturer Alzmetall, model AB 3 ES. The machine impresses with its robust design, precise operation and reliable performance. Ideally suited for workshop, metalworking and industrial applications. General information: Machine Type: Column Drilling Machine Manufacturer: Alzmetall Model: AB 3 ES Condition: Used, good general condition, fully functional Shipping time: Immediately available Technical data: Drilling capacity in steel: approx. 35 mm Projection: approx. 280 mm Drilling stroke: approx. 180 mm Recording: MK 3 Speed: Infinitely variable Table size: approx. 600 × 470 mm Equipment: • Drilling depth stop • Drill chuck Machine data: Dimensions (L × W × H): approx. 1200 × 800 × 2100 mm Weight:  ...

Inv. Num. : 9068 Type: VHC 3 XTS Producer: AXA Created: 2016 Parameters: Control system: HEIDENHAIN iTNC 530 Maximum vertical spindle speed: 10000 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Z-axis travel: 950 mm Cone: HSK – A 63 Number of all tools: 36 pieces Equipment: Chip conveyor NC rotary table AXA RTA 2-300 (diameter 300 mm) 3D Measuring Probe RMP60 Handwheel Hand Dishwashing Gun

Heavy Duty Column Drill Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 130 - 480 rpm - Stage 2. 480 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Separate coolant device - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 275 mm bore stroke: 100 mm taper MK: 4 MK table-size: 420 x 340 mm feeds: nein mm/U turning speeds: 80 - 2000 U/min total power requirement: 0,9 / 1,45 KW weight of the machine ca.: 0,22 t dimensions: 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 140 mm taper MK: 3 MK table-size: 380 x 360 mm feeds: über Handrad turning speeds: 85 - 1100 U/min total power requirement: 1,3 KW weight of the machine ca.: 0,27 t dimensions: 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg

For sale is a heavy and robust industrial column drill from the manufacturer Perfect, model BF 40 VS. The machine impresses with its solid cast construction, high stability and reliable technology. Thanks to its automatic feed and variable speed control, it is ideal for metalworking, mechanical engineering, locksmithing, repair shops or training workshops. The machine is in used, working condition with signs of wear and tear. General information Machine Type: Industrial Column Drilling Machine Manufacturer: Perfect Model: BF 40 VS Year of Make: 1988 Condition: Used, functional Availability: Immediately available Technical data Drilling capacity steel: 40 mm Threading: up to approx. M30 Spindle holder: MK4 Quill stroke: approx. 180–200 mm Speed range: approx. 50–2000 rpm Feed: automatic Motor power: approx. 2.2–3 kW Operating voltage: 400 V Projection: app ...