four column press used for sale

Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple -Manufacturer: LAUDI GVE -Type: Four-rope orange peel grapple type 6.3 m³ -Condition: unused -Accessories: 3 replacement arms for the gripper, see pictures -Max. payload: 5600 kg -Height of the closed gripper: 3400 mm -Height of the open gripper: 3900 mm -Width of closed gripper: 3380 mm -Opening width: 4660 mm -Rope length in closed gripper: 8600 mm -Rope length in the open gripper: 17250 mm -Transport dimensions disassembled: 2460/5020/H2500 mm -Weight: 5500 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-45443-72

Capacity: 180 × 100 mm Configuration: 4 shafts Bottom with reference: 4 kW Right: 3 kW Left: 3 kW Top: 4 kW Electric raising and lowering 4 tool holders included Chain drive Jointing table 1.70 m Dimensions (estimate): approx. 2,900 × 1,600 × 1,600 mm (to be confirmed) Weight (estimate): approx. 1,750 kg (to be confirmed) Auction-ID: A1-45443-71

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

Used machine - completely overhauled - ready to use, no costs to be expected! Martin - T90 Year: 2004 Features: Length of entrance table: 2m Folding exit table: 0.80m Working width: 260 x 160mm Shaft speeds: 6000 RPM Tree Shoes Tersa 56 Amps 6 Bar Machine dimensions: Weight: 2.5 tons Length: 4.20m Depth: 1.40m Height: 1.60m Auction-ID: A1-45486-3

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-28

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-134

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-132

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-135

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-133

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

- Meyer hydraulic four-fork adjuster - ISO FEM 2 Auction-ID: A3-43511-17016

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-70

Equipped with 6- Cil. \"Deutz\" diesel engine; 120 hp; 4 x powershift 6 gears; creep gear; PTO: 540/540E/1000/1000E; 4 double-acting rear hydraulic valves; depressurized return; air system; adjustable tow bar; tipper knob; fender control; front linkage with accord stand; front PTO; 1 single working hydraulic valve for; front-loader preparation \"Stoll\"; front loader operation; Auction-ID: A1-40134-50

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-81

Featured; 6-cylinder long stroke; Tjalma manure intermediate tank 4 cubic meters; 4 Wheel steering; Dogwalk; Pressure change course; Front linkage without control valve Tjalma manure tank type; TZW4500 2018 ; Serial number; XLGTW10400638K99 Auction-ID: A1-40134-14

PTO speed 540/1000 with eco mode 4x double-acting hydraulic valve rear 1x double-acting hydraulic valve front speed 50Km/H equipped with 6.7 liter 6 cylinder diesel engine with 180Hp Auction-ID: A1-40134-24

Please note; Computer failure high-Low and powershift sometimes drop out CAUTION! This vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are additional costs involved) Auction-ID: A1-40134-82

1X double-acting 1x single-acting hydraulic connection equipped with extra oil tank equipped with English pick-up hook drives properly equipped with Deutz 6 cylinder engine with 90Hp equipped with original Swedish papers / registration PTO speed 540/1000 Auction-ID: A1-40134-135

Top serviced JCB Fastrac 4220 with Quicke front loader (Euro mount) Seamless service intervals as the device is on the road in the municipality before and then in the contracting company. Get in and go! Tractor is sold WITHOUT shovel! Auction-ID: A1-45733-18

Electronic linkageSuspended cab, Massey Ferguson 6465T3, dyna6, 40km eco, suspended front axle, suspended cab, datatronic 3, isobus, 24+24 gears, climatronic, ccls pump with 2 electric valves, 3rd mechanical. Rotating front fenders. 5400 / 1000 rpm, Rear lifting capacity: ± 7,500 – 8,000 kg, Hydraulic pump: ± 110 l/min Auction-ID: A1-40134-23

Four-sided planer WEINIG P23 -used-6 spindles reversible knife system, profile device, electric height adjustment, lubricant pump, dust tested---------- Technical data ----------planing width: 230 mm, planing height: 120 mm, number of spindles: 6, motor spindle 1: 5.5 kW, motor spindle 2 + 3: 7.5 kW, motor spindle 4: 7.5 kW, motor spindle 5: 5.5 kW, motor spindle 6: 4 kW, feed speeds: 5-24 m/min., suction nozzle Ã: 6 x 140 mm, dimensions (LxWxH): 4,000 x 1,700 x 1,600 mm, weight: 3,200 kg

Manufacturer: New Holland Type: t3 Category: Agricultural Tractor ROPS structure: SLTV3 (CE certified, tested by OECD/OSHA/SAE). The existing safety structure nameplate provides information on axle loads and permissible towing loads, which allows the tractor to be classified in the medium performance segments. Technical data (according to nameplate): Front axle load: 2200 – 2850 kg Rear axle load: 4600 kg Permissible towing capacity unbraked: 3700 kg With overrun brake: 8000 kg With independent brake: 6000 kg With assisted brake: 21000 kg Weight: Permissible total weight: approx. 7000 kg (derived) Net weight: not known Condition: Visually used condition with usual signs of wear Technical condition not checked Equipment: Roll-over protection (ROPS) available Notes: Arrange transportation by buyer Solid tractor for farming, farm operation or as  ...

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Delta version, cabin with air conditioning, oil pump replaced in 2022. Well working tractor. Auction-ID: A1-40135-17

Equipped with: Safety bar, lights, rear linkage with PTO, mechanical suspension seat, including ground bucket 1200mm, power steering Auction-ID: A1-40135-246

4 pieces toño pc 2000 step lens headlight (function not tested but probably ok) Transport case lid to open, very good condition Layout 6-fold, large. Auction-ID: A1-45889-674

Formwork inclined columns newly hot-dip galvanized 2,10-3,50m a 40,90EUR/ pcs. New galvanized or painted construction supports 3.00m, 3.50m, 4.00m at great conditions directly from the factory. From 21,50€/ piece.+ VAT Construction support painted 1,60m - 2,90m = 21,50€/ piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, ...

Column Drill ALZMETALL Type AB 4 SVMasch. No. 14805 Year of construction approx. 1980Drilling capacity 40 mmSpindle holder MK 4 - Short quillThroat projection 340 mmQuill stroke 180 mmTable size 710 x 560 mmColumn diameter 160 mmSpindle speed 30 - 765 rpm. infinitely variableMotor power 2.3 and 3.4 kW pole-switchableMains connection 380 volts, 50 Hz- Spindle speed over 2 motor speeds and infinitely variable gear- Gears with 2 gear stages for high torque at low speeds- Spindle on/off via

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton