form used for sale

Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 36 pcs Weight: 125 kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-300 grams Machine weight: 62 kg Delivery time: 6-8 weeks after advance payment

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Machine type: Standing Dough Sheeter Material: Full Stainless Steel Belt size: 630 x 2400 mm Expanded: 3100 x 1100 mm Folded: 760 x 1720 mm Dimensions: 3100 x 1060 x 1100 mm Roller adjustable gap: 1-38 mm Max rolling capacity: 6.5kg/time Electric power: 0.75 kW - 380 V Weight: 260 kg

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 730x390x900 mm

Spiral dough mixer Container capacity (capacity): 32 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 12.5 kg Bowl Capacity: 32 liters Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 750x435x900 mm

Spiral dough mixer Container capacity (capacity): 40 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 16 kg Bowl Capacity: 40 liter Mixing Speed: 150/200 r/min Bowl Speed: 15/20 r/min Voltage: 220V/380V 50Hz Electric Power: 3 kW Machine Size: 800x480x1000 mm

Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Automatic slicer Ital Form Dimensions: 480x650x530mm Electric power: 0.37 kW Voltage: 220V 50Hz Cutting thickness: 0-6mm Blade diameter: 300mm Weight: 65 kg

Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Hand wheel to blade ratio 1:3

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

1 piece U-shape impact protection Height: 400 mm Material thickness: 4 mm Inner dimensions: approx. 150x145 mm Material colour: yellow-black incl. 6 pieces of ground anchors NEW from Eitorf warehouse

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

ERCA Cup Form-Fill-Seal Machine – Oystar ERCA M-FFS-14 High-performance cup form-fill-seal (FFS) machine designed for efficient production and packaging of dairy and food products in plastic cups. The ERCA / Oystar ERCA M-FFS-14 offers reliable operation and high-speed output, making it suitable for industrial food processing lines. General Information - Manufacturer: ERCA - Model: Oystar ERCA M-FFS-14 - Year of Manufacture: 2011 Technical Specifications - Production Capacity: 14,300 cups per hour Cup Formats - The machine is designed for the following cup sizes: - 80 g cups - 125 g cups - 150 g cups Machine Type - Process: Form – Fill – Seal (FFS) - Suitable for automated cup forming, filling, and sealing operations Typical Applications - Ideal for packaging products such as: - Yogurt - Dairy desserts - Cream products - Other liquid or semi-liquid  ...

Exchange units for contour milling HOMAG

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

Manufacturer: Format 4, Type: Profit H20, Year: 2014, Feeding speed max m/min: X-80, Y-80, Z-20, Working range X: 3830, Working range Y-axis: 1680, Working range Z: 275, Vacuum pumps m³/h: 90, incl. tools: yes, Gesamtanschluss kw: 18, Weight approx. kg: 3350, Year :2014

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Bar diameters 8-10-12 mm Maximum Bending Angle: 180° Maximum Pulling Speed 144m/min Bending lenght : 1650 mm

FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...

Edge banding machine FORMAT 4 Tempora 60.06 Touchscreen swivelling control panel, Program memory, automatic pressure bridge adjustment, Feed by means of a transport chain, Pull-out workpiece support, Diamond joining milling cutters in synchronous and counter-rotation, glue basin below, Changing device for glue basins, Use of PUR adhesives possible, printing unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be swivelled pneumatically, Flush / radius milling unit, motorized positioning control of the milling unit, x-motion PLUS, Corner Copy Unit, Radius Drawing Blade, Radius scraper blade with motorized positioners, Wing scraper, Operation-controlled surface pulling blade, Spraying device release agent, Spraying device lubricant, Spraying device cleaning agents, -----Specifications----- Edge thickness roll stock: 0.4 - 3 mm, Workpiec ...

Key data: 3000 mm, 920 mm, 50 mm

CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

Formlabs Form 3L Wholesome Package including Form Wash L and Form Cure L. All devices have been running for a very short time: approx. 50 hours. Year of manufacture 2022, commissioning October 2022. Accessories: 2L each of Resin Tough 2000, High Temp, Rigid 10K and a separate tank for each type of resin., Installation space in mm (x/y/z): 335x200x300, Layer thickness: 25-300 microns, laser power: 2x 250 mW, Resin refill automatically or manually: Automatically, size of laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0, Resin refilling automatic or manual: Automatically, Size laser spot: 85 microns, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60H ...

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...

gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts

Power Pack generator power 60 A Table size (width × length) 350 mm × 600 mm Travel (X × Y × Z) 400 mm × 300 mm × 300 mm Control: CNC Incl. extinguishing system

Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg