form used for sale

Straight Machine, Format: Max. 530x750mm, Min. 210x350mm, Largest Printing Area: 510x740mm, Maximum Production Speed: 15,000 sheets/hour, Prinect Press Centre with Remote Ink Control, Prinect Press Center Software, Prinect Inpress Control, Diagonal Register, Preset Plus Feeder, Autoplate XL, Double Diameter Impression Cylinders, Alcolor Vario Continuous Dampening System, Technotrans Refrigerartion, AlcoSmart, Ink Temperature Control, Auto Ink Roller Wash, Auto Blanket Wash, Auto Impression Cylinder Wash, Preset Plus Delivery, Anilox Coater, AirStar, Air-Cooled, UV Package – Delivery (Delivery Includes All Components Required To Equip The Delivery For UV Operation. Machine Is Equipped With DryStar Combination UV, 2 DryStar IR-/Hotair, 1 UV With 3 Lamps á 160 Watt/cm), UV Package – Coating Unit, 6th Printing Unit Is Equipped With Combi-Rollers, Double Sheet Detector – Pulling Device ...

Platform Machine platform Length A 3400 mm Length B 1470 mm Cf8y2hdmwz Width. 800 mm Stand height.. 920 mm

EOS P100 in very good condition, machine has always been serviced, last service in 02/2023. Material on the machine is PA2200.

Model Forma two vertical drill beams 17 – spindly adjustable, 1 horizontal drill beam 17 – spindle mobile Sales on behalf of customers

Very little used CNC machining center for wood and plastics. In addition, a chip extraction unit with 3 capacitive filters of 10 kw has been added.

Exchange units for contour milling HOMAG

Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 300 mm workpiece height: 300 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Manufacturer: Homag Druckzone 6-fach, Spare part from machine: KL 79, Type: Formsttrecke, Year: ca.95, Rollers: yes, Free-standing: yes, Roller size: ca 40 mm, Gluing part right side: yes, Year :ca.95

machine for expanding and reducing tubes 2 heads

machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

machine for expanding and reducing tubes 13 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Shape tester Hommel Etamatik for roundness and shape measurement in very good condition.

Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 -Price: complete -Weight: 6.8 kg

Key data: 5300 mm, 2200 mm

SPECIFICATIONS: Diameter of saw blades: 290-300 mm Max. cutting length: 5300 mm Max. cutting height: 2200 mm Speed: 5000 rpm Installed capacity: 7.5 Hp Overall dimensions: 6500 x 2950 x 1500 mm

one used MEP Format S stirup bending machine • Single strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 12 mm from #2 to #4 fy = 600 N/mm² • Double strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 10 mm from #2 to #3 fy = 600 N/mm² – ft = 700 N/mm²

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

diameter: mm Cutting (quantity): 0 weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Acmi Case Erector 2009 Case Erector manufactured by ACMI in 2009 complete with safeguards and user manuals It reaches speeds of 8000 BPH Currently not operational mothballed Machinery has been kept in excellent condition and is ready for immediate sale [...for more information send your inquiry to the seller.] refno: FC17

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg

Formpack F660 allows you to package and seal products into pre-prepared trays using sealing, vacuum and modified atmosphere (MAP), as well as skin packaging. Frame length (mm) 3500 / 4500 Max tray height (mm) 100 Maximum forming film size (mm) 660 Maximum reel diameter (mm) 400 / 250 Max pitch (mm) 320 Maximum bobbin diameter flexible/rigid - min 500 µm Main Standard Features E-mec toggle mechanism for die lifting Stainless steel construction Motorized bobbin unwinders for forming and sealing Rotating touch screen control panel Stripe with customers logo Automatic lubrication and line cleaning Maximum customization Washing program Wide format Basic options and accessories Centered printing system Coding and printing system Compact option Rigid film packaging option Skin packaging option Additional cutting stations Mechanized unloading conveyor

Sawblade tiltable: 45 ° Length of the rolling table: 3200 mm cutting width: 1100 mm Motor output: 5,5 kW Cutting height: mm Cutting height at 45°: mm Saw blade diameter: 450 mm Speed: U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg

Inv. Num. : 7326 Type: FORMAT 16 3D HS Producer: MEP Created: 2012 Parameters: Bending steel: 6-16 mm Equipment: Unwinder

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.270 mm Motor output: 5,5 kW Cutting height: ca. 103 mm mm Saw blade diameter: 350 mm Speed: 4.000 U/min. weight of the machine ca.: ca. 800 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor power: 26,0-kW Year of construction:2020 Motor voltage:3x 400 V motor frequency:50 Hz Working field: X= 3090 mm, Y= 2100 mm, Z= 85 mm 3 different vacuum table zone DH8 cutting head 2 vacuum pump with a total suction of: 500 m³/h / 50Hz; Electro-pneumatic shaft 10 kW HSK F63

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. sliding table saw FORMAT4 Kappa 400 x-motion S/n 605.09.011.16 Year of construction 2016 Manufacturer: Felder Austria Cutting length 2800mm X-Roll sliding table ( 10 years warranty ) Cutting width 1200mm Boom table 1500 mm with cut-to-length fence 3200 mm Cut-to-length fence 3200 mm, swivel 90°–45°, 2 stop jaws Control x-motion CNC engine control with LCD screen 5.7" (145 mm) in overhead control panel Positioning control for saw blade height Positioning control for saw blade angles Automatic cutting height correction when panning Circular saw blade speed indicator Positioning control for rip fence w ...

Pastry Moulding Machines Mold Rolls5 pieces we have in stockDimensions 58.5cm x 12.5cmDetails see picture

Key data: 45 °, 2800 mm, 1200 mm

3 axis control with boom with digital display for inclination Sled with warranty Remaining warranty 4 years

10 and 20 ltr for sale. Closure 61 mm

Approx. Onsite Dimension. (l x w x h): 320 x 310 x 50 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 300 x 310 x 70 mm, weight approx.: 15 kg

CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz

Approx. Onsite Dimension. (l x w x h): 300 x 310 x 70 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 370 x 380 x 50 mm, weight approx.: 15 kg

Inv. Num. : 1608 Type: MM6-2.5-1.5 Producer: DYNOBEND B.V Created: 2011 Parameters: Specifications: • Measuring range L 6000 x W 2500 x H 1500mm (2500mm is 1250 on both sides of the rail) • Measuring time 6 mtr. 1 min • Calculation time data: 1 min • Machine weight +/- 500kg • Windows XP control incl. PC • Rommer Arm • Control computer Documentation: • Electrical circuit diagrams in paper form and CD • Spare parts list in paper form and CD • Maintenance instructions in paper form and CD • Cleaning instructions in paper form and CD • Instruction manual in paper form CD and "Help" Machine Requirement: • The machine is equipped with a connection • The IP address is available

Form tester MAHR MMQ 40 5440057 Test diameter: max. Ø 420 mm R axis: max. 180 mm Z-axis: max. 350 mm Pmax: 60 VA Operating voltage: 110 - 230 V 1AC 50 / 60 Hz 2x Length Gauge T6W 5400054 Form-PC-Interface 7023988 Form-PC FUJITSU SIEMENS CELSIUS W340 with monitor, keyboard, technical documentation and various connection cables used, tested ! Dimensions ( form tester ): 650 x 460 x 750 mm Dimensions ( Form PC ): 510 x 210 x 390 mm Dimensions ( assembled ): 1500 x 830 x 1600 mm

DMG Feed Drives 1x Form 80x30x3+3, S-No.: 916412, Art. SKU: 2654426 1x Form/ X-A, S-No.: 1638737 1x Form 63x30x3+3, S-No.: 1630671 1x Form 63x30x3+3, S-No.: 1616895

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

- NEW / UNUSED - Stock residues, were intended for use in a hall - 3 available types a) HRL 400W/230/E40 high-pressure mercury vapor lamps, ellipsoid form (b) HRI-E/P 400W/D/230/E40 halogen metal vapor lamps, ellipsoid form, coated (c) RNP-E/LR 400W/S/230/E40 high-pressure sodium vapor lamps, ellipsoid form, coated - Quantities: to a) 900 pieces (150 packages each 6 pieces) to b) 576 pieces (48 packages per 12 pieces) to c) 600 pieces (50 packages per 12 pieces) - Partial quantities possible - We will be happy to send complete manufacturer data sheets on request!

Machine type Machining center universal BAZ Manufacturer Heller Model MCS-H / U 300 Year of construction 2002 Condition good (used) Specifications Bright MCS-H/U 300 Year of construction: 2002 Control: Siemens 840 D Workspace: Longitudinal stroke X-axis 1000 mm Vertical stroke Y-axis 800 mm Transverse stroke Z-axis 1100 mm Lifting position longitudinally to the center of the table MCS-H X-axis +500 to -500 mm Lifting position vertically over. Palettes. MCS-H Y-axis +120 to +920 mm Lifting position transverse to the center of the table MCS-H Z-axis +200 to +1300 mm Guidance system: Linear compact roller guide version Size 55 Transfer elements: Accuracy Ball Screws Diameter x Slope Diameter 50 x 20 mm Feed drive system: Three-phase servo motors Closed design Feed forces: X-axis at ED S3-40% 15000 N Y-axis at ED S3-40% 15000 N Z-axis at ED S3-40% 20000 N Positio ...