form fill seal used for sale

Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.

Resolution: 1440dpi, working width: 1600mm, number of colors: 4, length: 2698mm, width: 845mm, height: 1600mm, weight: 182kg.

A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m².

Thermal CTP Cron CTP TP6032 UVP H Tiff catcher Aged 2022 Produced around 20.000 quadrat meter pro year Min size: 450 x 370 mm Max Size: 1524 x 1200 mm without RIP 32 Laser channels Speed 11 plates per hour Used the Sonora plates

Bobbio CNC 502 spring coiling

BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 236 spring coiling machine + AB1 decoiler cap wire diameter: 1 gt; 3 mm winding diameter: max 70 mm max spring length: 180 mm max length of leg: 80 mm speed: 80 m/min power: min 9 kW / max 13,4 kW length: 1500 mm width: 1100 mm height: 1500 mm weight: 1300 kg

BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,2 gt; 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 1300 mm weight: 620 kg

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

Wire diameter: 1 mm Number of bending slides: 1   CNC Brand: _Unknown / Other Integrated C-Axis 0-40 Rpm Min. distance table to quill : 215 Max. distance table to quill: 615 With seperate coolant tank X-Axis:                 700mm Y-Axis:                 500mm Z-Axis:                 400mm Table size L x W / or ø:870 x 550mm Table load:             50 Feed rate X-Axis:       1500mm/min. Feed rate Y-Axis:       1500mm/min. Feed rate Z-Axis:       1500mm/min. Length:                 3000mm Width:                  3000mm Height:         ...

MF-25 Corner Forming Machine

Inv. Num. : 6283 Type: Producer: Generated: 2000 Parameters: The line consists of: 2x shape lines (force shaper. 2x unwinding reel and automatic scissors at the end) 1x edge banding machine (corner shelf) automatic calculator for finished corners)

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Product number: 2643B Type: MultiFormer400 Serial number: 2489 Year of construction: 2013 Belt width: 400 mm Capacity: max 55 strokes/min. Hopper: 270 litres Power: 3 x 400V, 50Hz, 9kW Dimensions: 3350 x 1100 x 2650 mm Weight: 1200 kg WIth bridgebreaker Including trolley for forming plates and parts

: gebraucht : 9697 : prompt, Zwischenverkauf v : USA : 2800 € : 1 : 0.8 - 1.25 mm : 2.2 kW : 1500 mm : 620 mm : 1150 mm : 284 kg 1 set of rollers for Pittsburgh fold 1 set of rollers for long fold Mounted on wheels no User manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEATBALLS FORMER STORK TITAN B.V, MODEL: TVM 004 Technical description: Number of heads: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1500 x 2300 x 2680 mm Load lifter: Optional

MEATBALLS FORMER 1 HEAD, MENZING TITAN TYPE: VM 005 Technical description: Serial number: 641490 Number of heads: 1 Diaphragm diameter: ?70 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 1450 x 2170 mm

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Capacity: 100 t Stroke of each cylinder: 200 mm Width material maximum: 10 mm Distance grippers maximum: 710 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:710mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:         ...

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

We offer a new, universal element slab formwork system EVODECK 300m², directly from the factory at great conditions, special net price € 87,368.00 Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 150 Element EVODECK 150x120 cm with PP formwork plate 10 element EVODECK 150x75 cm with PP formwork board 10 element EVODECK 120x75 cm with PP formwork board 90 Drop head EVODECK 135 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 9 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and di ...

Seewer Rondo SSO62 pastry brake Stainless frame, belt dimensions 3200mm x 640mm, top mounted flour duster, mobile, 3Ph

Gebr. Stair formwork / delta formwork ramp, make HOWAL, for straight stairs - mechanically adjustable, stairs can be made in installation position up to approx. 2.26 m wide and 18 gradients, max. platform length: 2.00 m

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

thread diamter M8-M16 number of dies 5 number of stations (incl. cut off) 6 max. width across flats 24 mm output pieces/min 120 cutting length 19 mm press power 180 t

Product number: 2714B Type: MLF400 Serial number: 2412 Year of construction: 2010 Belt width: 400 mm Capacity: max 55 strokes/min. Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 8kW Dimensions: 3350 x 1100 x 2650 mm Weight: 1200 kg With bridge breaker

Product number: 2728 Type: MFD Model: 51670-C-0014 Serial number: 208280 Year of construction: 2010 Working width: 400 mm Lanes: 4 pieces Product size: max 55 mm Outfeed height: 1150 mm Power: 230VAC, 50Hz, 2kW Dimensions: 950 x 1200 x 1800 mm For forming filled products

Jungjohann Coating format saw blade 302 x 3,2 x 30mm Z=60 sharp

Gebr. Sectional formwork Fabr. Technoplan, L = 26.50 m, max. chamber dimension = 1.65 m x 1.80 m Steel formwork, incl. vibrating system (vibrator, converter) Formwork can be moved hydraulically

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Three-phase meter AEG form C11H 3x 220 / 380 V 10 (30) A 50 Hz 1 kWh = 187.5 armature revolutions used, tested ! Dimensions: 290 x 185 x 135 mm

Three-phase meter LANDIS & GYR form ML262 3x 230 / 400 V 10 (60) A 50 Hz 1 kWh = 187.5 armature revolutions cable cover defective used, checked ! Dimensions: 320 x 180 x 135 mm

Drawing cabinet, architect's cabinet, plan cabinet, 2-part PAGUS format DIN A0 width: 1320 mm depth: 950 mm height: 800 mm ( 2x 400 mm ) Material: sheet steel 8 drawers: width: 1260 mm, depth: 900 mm, height: 55 mm used, tested ! Dimensions: 1320 x 980 x 800 mm

Tightening bolt, sealed, 10 pieces PAGUS form B 40 with bore: Ø 7 mm thread M 16 x 2.0 suitable for steep taper SK 40 used, tested ! 10 pieces ! Dimensions(Packed): 110 x 110 x 20 mm

Tightening bolt, 10 pieces PAGUS form B 40 with bore: Ø 7 mm thread M 16 x 2.0 suitable for steep taper SK 40 used, tested ! 10 pieces ! Dimensions(Packed): 110 x 110 x 20 mm

Position feet, 20 pieces PAGUS form A M8 pitch: 1.25 thread length: 10 mm foot area: Ø 15 mm height: 10 mm width across flats: 17 mm Other quantities on request ! New ! Dimensions ( single position foot ): 20 x 17 x 20 mm Dimensions ( packaging ): 140 x 100 x 20 mm

HSS hand reamer, hand reamer, right-hand reamer PAGUS DIN 206 nominal diameter: Ø 34 mm form A ( straight grooves ) number of grooves: 12 cutting edge length: 155 mm cylinder shank: Ø 34 mm square: 26 x 26 mm, length: 28 mm Total length: 310 mm New, preserved ! Dimensions ( packaging ): 350 x 47 x 47 mm

Slip-on reamer, right-hand cutting POLAND 62 H7 SS DIN 219 Nominal diameter: Ø 62 mm form A ( straight grooves ) Number of grooves: 12 Cutting edge length: 60 mm with taper bore: Ø 29,5 / 31.5 mm, length: 69 mm transverse groove ( according to DIN 138 ) : 11 x 10 mm ( width x height ) Total length: 80 mm New, preserved ! Dimensions ( packaging ): 90 x 75 x 85 mm

Slip-on reamer, right-hand cutting POLAND 70 H8 SS DIN 219 Nominal diameter: Ø 70 mm Form A ( straight grooves ) Number of grooves: 16 Cutting edge length: 62 mm with taper bore: Ø 37 / 70 mm, length: 77 mm transverse groove ( according to DIN 138 ) : 13 x 12 mm ( width x height ) Total length: 90 mm New, preserved ! Dimensions ( packaging ): 85 x 80 x 95 mm

Make WM Model FC 780E Speedmaster Year 2010 Condition Very Good Hours approx 21500 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Make WM Model FC 780E Year 2007 Condition Excellent Hours approx 29950 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Product number: 2786 Type: MLF600 Serial number: 726 Year of construction: 2001 Belt width: 600 mm Capacity: max. 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2270 x 1660 x 2550 mm Weight: 1782 kg

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Pastry machine Janssen Model: FF 2500 with 1 rollers and 10 sheets Table Machine Biscuit machine! Connection 400 V, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery equipment warehouse!

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg