form fill seal used for sale

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...

Various spare parts for capsule filling machine BOSCH, type GKF1500.

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

FAM piston filling machine for pasty products,, below level filling,, rotary machine with 10 stations,, Cylinder diameter: approx. 100 mm, cylinder length: approx. 390 mm,, Piston: diameter: approx. 100 mm, height: approx. 250 mm,, set up for container diameter: approx. 56 mm,, 2 sets of filling nozzles: filling opening 11 and 17 mm, filling tube length: approx. 162 mm,, Plastic conveyor belt, belt width: 85 mm,, Overall dimensions: 2,750mm x 1,500mm x 2,400mm., With pallet with s/s tank and control cabinet,, Internal tank dimensions: Ø 580 m x 690 mm,, Tank dimensions: 770 mm x 600 mm x 1570 mm,, Dimensions control cabinet: 800 mm x 600 mm x 2100 mm, and with trolley with parts,, Dimensions trolley: 1150 mm x 600 mm x 950 mm and pallet with parts,, without a platform, which can be seen in some pictures.

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

Used Used Case Packer Monoblock Tmg: Year: 1999 Condition: Good Used Case Packer Monoblock Tmg Year: 1999. Speed: 2.500 bph. Box forming machine | American box. Case packer | 6 heads Box closing machine | hot glue. Safety protections Code: JM 14 More details: https://bottlingscout.com

Bottling plant with canteen kitchen, which is located in a complete enclosure, is sold due to site closure. 7 pieces of Schneider cooking kettles in V2A double-walled heated with a 24KW) 400 litres (together 2800 litres!) and a Nüssler extraction system and a Novapack filling system (rotary machine) with LFA air filter system and complete equipment for filling currently 500 gram cups with UV disinfection solution for cups and circuit boards. Plastic lids are placed fully automatically after capping. See photos for details. Various accessories and spare parts are also sold as the site is closed. The facility has been proven to have been used very little and can still be visited until the end of March 2026. System available immediately from site. Lead time for optional dismantling and delivery and assembly currently approx. 2 weeks. A bottling plant with a commercial kitchen, housed in a ...

Used Used Case Packer Monoblock Mondo&Scaglione: Year: 2008 Condition: Good Used Case Packer Monoblock Mondo&Scaglione Year: 2008 Speed: 2.000 bph Direction: linear Box forming machine Case packer Hives inserter Box closing machine Gluer meler Safety protections. Code: JM 60 More details: https://bottlingscout.com

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Used Used Case Packer Monoblock Italproject Mif 39: Year: 2003 Condition: Good Used Case Packer Monoblock Italproject Mif 39 Year: 2003 Speed: 8 cycles per minute Model: mif 39 American boxes Type of heads: 6 ? 12 Heads available: Double head on box: 3?2 Single head on box: 3?4 Box forming with glue Box closing with glue Code: JM 88 More details: https://bottlingscout.com

KEG wash and fill, 7-10 KEG/h, manual, new

Used Used Case Packer Monoblock TMG: Year: 2000 Condition: Good Used Case Packer Monoblock TMG Year: 2000 Speed: 20 pz/min ? 7.200 Bph model: A1 E M1 Box Sealer | 2004 Model: N A 43 Closure type: Tape Formats: Box of 6 and 12 bottles Safety protections Code: JM 92 More details: https://bottlingscout.com

KEG wash and fill, 20-30 KEG/h, automatic, new

Used Used Case Packer Monoblock Bortolin-Kemo: Year: 2002 Condition: Good Used Case Packer Monoblock Bortolin-Kemo Year: 2002 Speed: 5.500 Bph Case erector Hives inserter Case Packer Single head for 2 cartons of 6 bottles Case Sealer Glue closure above and below NORDSON Safety protections Code: JM 95 More details: https://bottlingscout.com

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. The machine is currently set on 10 gram. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil at the first folding station, the machine will stop. Mechanical belt driven outfeed conveyor of ± 1.000 mm, mounted 90° on the machine to the semi automatic case packer, Benhil 8534. The Benhil 8304 ma ...

Used Used Case Packer Monoblock Fipal: Year: 2010 Condition: Good Used Case Packer Monoblock Fipal: Model: Combi 1000 C Year: 2010 Speed: 1000 CPH 2 heads with 4 clamps Suitable for trays. (with new clamps work bottles) Case erector by hot melt Gluer Melton Closing machine by hot melt Safety protections Code: JM 98 More details: https://bottlingscout.com

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

Used Used Packer Monoblock & Palletizer Prosystem: Year: 2016 Condition: Good Used Packer Monoblock & Palletizer Prosystem: Model: Compal 4F 003 NS Year: 2016 Speed: 280 CPH Suitable for: ? 2?2 with bottles of 4 L ? 3?2 with bottles of 2 L ? 3?4 with bottles of 1 L Case erector Case packer Single head 12 registrable clamps Closing carton machine By tape Closing above and bottom Palletizer Dimensions: ? Lenght 6700 mm (including entry conveyor) ? Weidth minimum 2250 mm; maximum 3000 mm ? Height 3400 mm (arm ?s palletizer) Manuals available Safety Protections Code: JM 104 More details: https://bottlingscout.com

Used Used Krones Monoblock PET Volumetic 32.000 bph: Year: 2001 Condition: As Is The machine is equipped with: 120 filling valves 88 rinsing stations 2 rinsing channels (currently configured for ClO? and fresh water) Clockwise rotation Formats currently available: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures Production capacity: Up to 32,000 bottles per hour at 1.0 L Safety protections Availability: Beginning of October 2026 Code: BQ 01 More details: https://bottlingscout.com

Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2023). The machine is only used some weeks for trial production by the previous owner. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a direct connection with compensator (build on the machine) or with a hopper with agitator screw inside, mechanically drive from out of the main machine (loose delivered wit h the machine). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print ...

Used Used monoblock capper | wirehooder Bertolaso: Year: 2017 Condition: Good Monoblock Capper | Wirehooder BERTOLASO Year: 2017 Speed: 18.000 BPH Direction: Clockwise Capper 16 heads | Delta 816S Mushroom Cork Wirehooder | Minerva 200 20 Heads Long autonomy distributor cages Caps Elevator Safety protections Code: HJ 69 More details: https://bottlingscout.com

Complete aseptic carton filling line, previously used for the production of aseptic juice products in carton packaging. The line is centred around an Shikoku / Elopak S-PS80HA PURE-PAK aseptic carton filler, designed for 500 ml, 750 ml and 1,000 ml Gable Top Diamond Curve cartons with screw cap. The installation includes a conveyor system with integrated buffering section, as well as three cap applicators (Elopak E-PLA-S30, year 2009, serial numbers 22184, 22185 and 22186) and a cap feeding bunker (Elopak CSFS, year 2009, serial number 28119). Downstream packaging is handled by a flexible cardboard tray packer (Oystar A+F Traypacker TF, year 2011, serial number 320 606 01), suitable for pack configurations of 4×3, 4×2 and 2×3 cartons per tray. The scope of supply further includes control cabinets and cabling, interconnecting piping and valves, as well as instruction manuals and spare  ...

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/27 rpm or 1600/34 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

ENVASQUIM brand liquid filler model ENV1/43B. Dosage range: 100-1,000 ml Power supply: 380 V (50 Hz) Working temperature: 0-40ºC Compressed air supply: 6 bar Usable width of tape 100 mm Documentation: Technical file CE marking Technical characteristics Model ENV1/43B Transportation Information Length 2100 mm Width 1400 mm Height 1700 mm Weight 350 Kg Documentation CE Certificate Status In your state Manufactured by Envasquim

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

Fillet system, consisting of: Filleting machine Manufacturer: PRIMA s.r.l Model No.: WCLSE-1000/1 Capacity: 200-800 kg/h Climbing snail Machine: Conveyor Manufacturer: PRIMA s.r.l Type: Cochlear Enhancer Model No.: CHT50B003 Schnetzler Machine: Cutting Device Manufacturer: PRIMA s.r.l Model No.: CHT50B003 Lifting and tilting device Manufacturer: Frontmatec Hygiene GmbH Type: 27000 Accommodates 200 and 300 litre standard loading trolleys for rational use in the food industry

2 Head Automated Cask Washer - Second Hand 2 heads cleaning, stainless steel cask washer, with rotating spray balls. Heated detergent tank Air Actuated Valves Single Phase 240 Volts Manufactured by ABUK - 10/07/2004 Serial Number: AB06 For more information and more available stock please visit us at - advancedbrewing.co.uk

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/25 rpm or 1600/30 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

Filler SEN Combi RE with124 filling station blocked with 20head Zalkin screw capper Capacity: 19.900 bph by 1,5 ltr. PET bottles Year of manufacturing: 1991 Isobaric filling system Bottle formats: 1,5 ltr. PET and 0,5 ltr. PET Work direction: left-right The machine is suitable to fill carbonated soft drinks. incl. cap feeding system: Gassner The machine is out of production but still connected.

for dosing sauerkraut or red cabbage into flow packs (without flow pack machine),, Dosage 250 g to 500 g Speed of the screw dosing frequency controlled,, 40 beats per minute possible,, different programs can be saved., power: up to 40 cycles / min, and a: up to 40 cycles / min, Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean.: up to 40 cycles / min

The NETZSCH NM031BY02S12B NEMO® pump is a progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 0,75 kW - 230/400 V - 50 Hz - 1.375 rpm - 3,64/2,10 A. Connections on the inlet/outlet: DN 50. Current capacity: 70 - 400 ltr/h. Pressure: up to 8 bar. Rotor speed: 30 - 150 rpm., Key Advantages:, - Valve-free design with stab ...

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

in use for sauces, jams and spreads in 212 ml, 314 ml jars and 215 ml, 244 ml and 295 ml bottles, filling range: up to 1 l, output: max. 180 glasses per minute, width: approx. 1,800 mm, height: approx. 2,800 mm, depth: approx. 2,000 mm, weight: approx. 4 t, completely overhauled and in excellent condition. Improved CIP cleaning, manual in English in PDF format and original manual in French.

Overview  This atmospheric filling monoblock with crown capper was manufactured in 2017 by Spain Cespedes. The machine is designed for bottling beer or other non‑carbonated beverages in 330 ml glass bottles. The equipment combines a gravity filling system with an integrated crown capping unit. The machine is in good condition and is currently not in use. It is being sold due to an upgrade to a higher‑capacity model from the same manufacturer. Technical data  Capacity: approx. 900 – 1,200 bottles/hour Formats: 330 ml glass bottles Application: Bottling of beer or other non‑carbonated beverages Configuration: 8 gravity filling valves, 1 crown capping head Neck finish: Crown cap Ø26 mm Utilities: 400 V / 50 Hz Dimensions: approx. 2,260 x 850 x 2,250 mm Weight: approx. 900 kg

Can filling line CFT capacity: 12.000 cph year of manufacturing: 2017 can size: 150 ml Slim line / 200 ml Slim line / 330 ml Standard lid size: 200 and 202 filling products: carbonated water and drinks consisting of: 1. Can depalletizer CFT type 101 2. Can filler type: Master-Can Tronic RS24/4 with 24 filling valves 3. Can seamer CFT 3000/4 with 4 seaming heads 4. Wrap around can packer SMI to pack 2x2 and 2x3 cans 5. Can tray shrink packer SMI to pack 4x3 cans 6. Stretch wrapper (semi automatic)

FILLING AND CAPPING MACHINE ZELLWAG Z-110 Single-station monoblock filling and capping machine for filling liquids via a Flexicon PD22I peristaltic pump. With Touch screen Siemens Simatic and separate control cabinet. With spare parts. Built in 2012. PRODUCTION - Output: 100 units/min (up to 6000 units/min, depending on format) - Format set for bottles: 1, Ø 40 mm ENERGY CONSUMPTION - Energy: 3 x 400 VAC + N + PE - Tension: 15 kW - Frequency: 50 Hz - Compressed air: 6.0 bar (min) SIZE - Weight: 1000 kg (ca) - Dimensions: 3400 x 1500 x 2400 mm (ca)

A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026.

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pr ...

This single head Alfa Laval Astepo Aseptic Pilot Filling System for bag-in-box (PTAF) system is a filling system for filling of a wide range of food and beverage products info appropriate bag-in-box bags under aseptic conditions. The PTAF filling system has been designed for use in laboratory and pilot applications as well as for taking sterile samples in aseptic industrial plants. A fail safe system continuously controls the sterile conditions. In case of an unexpected risk of sterility loss the equipment aborts production and notifies the operator. The PLC only allows for return to production mode after all the necessary parameters for sterility have been reset succesfull., This PTAF aseptic pilot filling system is designed for 1-20 litre (1/2 - 6 gallons) sterile bags of the bag-in-box type. It is available with a 1 inch filling valve for liquid products, dense and viscous. It is also ...

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Edhard Filling & Dosing Hose with Electric Hand TriggerProduct descriptionManufacturer: EdhardFor dosing soft to compact products on trays and in baking tinsDetails see pictures

Edhard Funnel 17 Ltr. single outlet, 1-hole system NewManufacturer: EdhardVolume: Â Â 17 LtrDetails see pictures

Pastry Filler / Berlin Filler with 2 Pistons NEW! Pastry filler / doughnut filler with 2 plungers for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Edhard Funnel 17 Ltr. double OutletFunnel 17 Ltr. double OutputVolume: 17 LtrDetails see pictures

Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surfa ...