form fill seal used for sale

Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional

Type: Robby Serial number: 1390303 Year of construction: 2022 Pump capacity: max 2300 kg/hr Hopper: 105 litre Vacuum pump: Busch 16 m³/h Power: 3 x 400V, 50Hz, 5kW Dimensions: 900 x 1200 x 1950 mm Weight: 425 kg Filling, portioning and linking Including 859 linker and DHV937 casing holder Only 52 running hours!

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

Filling machine Frey Heinrich 20, Piston filler with a capacity of 20 litres, machine mounted on a mobile base, Connection 400V, dimensions LxWxH approx. 60x55x120cm, very good used condition, fully functional

Handtmann VF 50 incl. turning device and complete accessories

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...

Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Pastry Filler / Berlin Filler with 2 Pistons NEW! Pastry filler / doughnut filler with 2 plungers for filling doughnuts or pastries7 liter bowl with lid made of stainless steel Details see picture

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Vemag HP30E Vacuum Filler  Complete with loader

Used Handtmann twisting and unscrewing line type PVLH 228 Plus. Line for sausages in natural intestines, collagen and artificial casings. • PLUS NEWS AND OPTIONS: Natural bowel pusher, minimal setup time, easy operation and much more... • STEP-BY-STEP PROCESS: portioning – twisting – twisting with butterflies – Equal portion length – hanging • TOP QUALITY PRODUCT thanks to gentle twisting with butterflies and a twisting unit • LARGE VARIETY OF PRODUCTS thanks to a wide range of applications and calibers and different stations butterflies spinning • FLEXIBILITY due to a variety of suspension module options: grouping, number of loops and distances between hooks, empty or full portions • HIGH PERFORMANCE thanks to rotating twin-funnel head • COST-EFFECTIVE by changing the cover in less than 2 seconds • SIGNIFICANT COST REDUCTION due to the highest w ...

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

Model VM400-30 Jaar 1998 Conditie Gebruikt Serienummer: 1990 Voorraad nummer: 3062B Belt width: 400 mm Capacity: max 30 strokes/min Hopper; 100 litres Belt speed: 1.5 - 15 m/min Compressed air: 6 Bar, 300 l/min Power: 3 x 380V, 50Hz, 5kW Dimensions: 2150 x 750 x 1750 mm Weight: 640 kg

Manufacturer: Rex Model: RVF 761 Condition: Used Serial Number: 7611040927 Stock Number: 3364 Hopper: 250 litres Pump capacity: max. 6100 kg/hr Filling pressure: max. 70 bar Working hours: 19648 Power: 3 x 400V, 50Hz, 15kW Dimensions: 2320 x 1440 x 3035 mm Weight: 1100 kg Filling, portioning and linking Including linker and DHG400 casing holder With lifter for 200 L eurobins

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

110 Valves, Division of 100 mm, with SV. Bu. 1995

for 200, 250 and 330 ml

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

sell used H & K bottle filler with Kronenkorker, 90 filling valves, 16 closing, Siemens S7 control furnished on 0,5 l NRW, 0.33 litre long neck and 0.5 liter bar closure

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

1000 ml, 750 ml, 500 ml, 250 ml,

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Delivery time: 2 weeks Length: 350 mm Width: 470mm Height: 480 mm Capacity: 8 litres Weight: 20 kg Kw: 0.1 Operating instructions: german Description Pastry filler of manufacturer IZO is an electrical machine for dosing and injection of cream and jam. The machine is designed for professional use in bakeries and pastry shops. -Digital Control Panel - cooler - automatic time dosage

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

Edhard Pastry Fill masschine Series P Model: Edhard Filling Unit P 4020 Pastry filler for automatic filling Dosing quantity via digital control panel 5.5 litre funnel with spout Table equipment With this filling and dosing system, masses are placed directly in 2 pastries dosed over two 57mm long, 7mm thick filling tips. The plastic funnel holds 5.5 litres. The motor socket triggers at each switch pressure. Exactly the set quantity is injected up to max. 800g Connection 220V, 44 watts Dimensions: 172 x 391 x 229 mm, TxHxW NEW Device with 12 months warranty Visit our Milbrandt Outlet with show backroom and many bakery appliances

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

Piston filler with 10 filling points for filling viscous/viscous products in glasses or bottles with bottle mouths from 28 to 38mm Up to a maximum of 0.75ltr

Haver & Boecker SWA/MECII-20 Loading Device Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk goods Suitable for free-flowing non-dusty bulk materials Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10°C / 40°C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x W240 x H310 Haver Nettowage with frame Weighing and evaluating electronics MEC II-20 to control weighing and/or machine functions Advantages • high ease of use • easy programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Bt 15 operator terminal For automatic remote variety adjustment, including motor adjustment of the bag length/width  ...

New BIG BAG filling station The device is available immediately from stock. Technical data: Weight: 160 kg Dimensions: 1400 x 1640 x 1960 mm (L x W x H) Maximum dimensions of the big bag's: 1000 x 1400 x 1500 mm (L x W x H) Technical data sheet, see the images on offer. At smaller big bag can be inter's pallets.

Gas filling device / scale with rolling landing Manufacturer: Ninnelt International GmbH Type: CTE 110 In good condition!

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.

New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT