form fill and used for sale

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

For sale is an original ROBEL track lift winch type 46.50 with 10 t lifting capacity. Professional, robust track lift winch for lifting and lowering heavy loads, especially for applications in track and railway construction. Technical data: Manufacturer: ROBEL Bahnbaumaschinen GmbH Type: 46.50 Serial No.: 46.50-00459 Ref. No.: 800 465 0001 Year of construction: 2019 Load capacity / SWL: 10,000 kg Maximum lifting height: 300 mm Excavation height: 80 mm Weight: approx. 46 kg Safety crank with load pressure brake and folding handle Robust design with reinforced base plate Made in Germany CE marking The winch is in good used condition with usual traces of use and storage. Suitable as a professional track hoisting winch as well as for corresponding heavy lifting applications in compliance with the respective application and safety specifications.  ...

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 KW, 400 V

Buderus Gas CHP EN 70 Gas electricity and heat generator from 2011 with 50,524 operating hours. Closed unit with control unit and heat exchanger. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Natural Gas CHP Serial Number: 207035 Power [KWel]: 70 Power [KWth]: 109 Engine: MAN E0836 E302 Engine power [KW]: 75 Year of Make: 2011 Hours: 50,524 Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 0.90 x 1.90 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 260460/6 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2011 Weight [kg]: 440

Key data: 250 KW, 400 V

Viessmann Gas-CHP Vitobloc 200 EM 238-363 Natural gas electricity and heat generators from 2014, 67,631 operating hours, closed module. 238 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2L9 C 6S/4, 280 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 238-363 Type: Natural Gas CHP Serial number: 7411152 3 02335 104 Power [KWel]: 238 Power [KWth]: 363 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2014 Hours: 67,631 Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.40 x 1.80 x 2.10 AC Generator Leroy Somer LSA 46.2L9 C 6S/4 Manufacturer: Leroy Somer Model: LSA 46.2L9 C 6S/4 Type: AC Synchronous Generator Serial Number: 304507/1 Power [KVA]: 280 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 404 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 770

Heating: gas, 28kW, Burners: 14 pieces, Capacity: max 400 kg, Skewer size: max 700 mm diameter, Skewer height: max 1150 mm, Power: 220V, 50Hz, 1.5kW, Dimensions: 1200 x 1250 x 2350 mm

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090520004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a winding and pulling machine for electric motors. The system has three winding stations, a pulling station and an intermediate molding machine. Since an electronic card is defective, the machine is only partially functional at the moment. The facility is in good condition.

Steel plate and chain belt conveyor belt Manufacturer: FMW Förderanlagen GmbH Year of construction: approx. 2019 Total length approx. 45,000 mm Width: approx. 2000 mm For sale here is a steel plate and chain belt conveyor belt with a total length of approx. 45 m and a width of approx. 2 m. For exact data, please refer to the drawing. The conveyor belt is currently still set up and can be visited on request. Disassembly is not included in the price.

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Description Item #8985 - FLAVOUR COATING AND SEASONING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS Manufactured by SCHAAF All from Year 2018. Line includes : TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm. TYPE 282 DRUM DRIER/ROASTER 1600 PTFE, Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures ...

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Weeke ABD 150 Drill and dowel inserting machining center manufacturer: Weeke Type: ABD150 Year: 2013 Mach.Nr.: 0-253-05-5352 Production hours: Desctription: CNC-controlled drill- and dowel automat for production of furniture and such Workpiece dimensions: X-ax 20 – 1.250 mm Y-ax: 100 – 800 mm Z-ax: 10 – 60 mm Center positioning fence: max. 600 mm Workfield: 1.250 mm Positioning: X-as AC -servo drivesystem via tooth bar Y-as: manual setting X-as: manual setting Positioning stops: Table support with rear- and sideward stoppers 6 workpiece supports manual positioning over full machine width, with scale Pneumatisch controlled center fence via manual control button 5 top clamps, manual positioning Vacuum clamps for sensitive panel surface 10 vacüumcups (115140100 mm) manual position over full machine width 2 vacüumcups (12575100 mm) manual positioning over full machine width 1 externa ...

Nipping and Smashing Kolbus FM 405 - AB 370 Falz- und Buchblockpresse / Nipping and Smashing Kolbus FM 405 - AB 370 Buchblockfalz- und Ganzpresse mit Buchblockanleger Book Block Joint and whole Block Press with Book block feeder Baujahr / Year 1988 - Serial-No. 308 Format (unbeschnitten) / Size (uncut) min. 125 x 100 x 6mm - max. 380 x 290 x 80mm Sehr guter Zustand / Very good Condition Maschinengewicht / Machine weight 4200kg

Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year 03/2002 - Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW

Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The machine is equipped with 2 format sets: 200 and 250 gram, 100 x 55 x ± 40 mm and 100 x 75 x ± 35 mm, both bottom folded. The butter is feed with direct connection with compensator. Aluminium dosing station. Automatic greasing system. The machine is fully rebuild / reconditioned by Benhil - Germany in 2006 and has stainless steel and polycarbonate covers around the machine, with CE logo on the side., Excluding:, - Outfeed conveyor, Type of Machine: Butter packaging machine , Capacity: ± 1.000 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: 200 and 250 gram, Brick size: 100 x 55 x ± 40 mm and 100 x 75 x ± 37 mm, Packaging type: Bottom folded, Year of refurbishing: 2006, Motor power: 3 kW, Weight: 2.160 kg

bore capacity in steel (diameter): 35 mm x-travel: 450 mm y-travel: 250 mm z-travel: 500 mm digital: ja Dimensions (L/W/H): 1,2 / 1,1 / 1,95. mm thread dia.: 24 mm weight of the machine ca.: 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-231

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-131

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-31

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

pressure: 10 t stroke: 380 mm table-size: 800 x 700 mm working speed:: mm/ sec. return speed: mm/sec work height max.: mm total power requirement: 4,0 kW : 90 mm weight: 2,5 t dimensions: 2,2 x 1,4 x 1,6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONES ...

: neu : 2026 : 090222 : prompt, Zwischenverkauf v : Spanien : 15800 € : 303.36 € : 1 : 1 : 50 to : 177 mm : 5 : 1 : 31 x 12 mm : 34 1/min : 350 x 15 mm : 80 x 8 mm : 35 / 30 mm : 10 mm : 100 x 10 mm : 3 kW : 1300 mm : 1100 mm : 1850 mm : 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The da ...

: neu : 2026 : 090194 : prompt, Zwischenverkauf v : Spanien : 22400 € : 430.08 € : 1 : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 € : 947.36 € : 130 to : 600 mm : 5 : 2 : 50x18 mm : 80 mm : 600x18 (max. 600x20 mit D mm : 120x120x11 (max. 150x150x mm : 45/40 mm : 130x12 mm : 250x12 mm : 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2009 : 9725 : prompt, Zwischenverkauf v : Spanien : 14700 € : 1 : 110 to : 300 mm : 5 : 2 : 40x20 (28x28) mm : 80 mm : 17 1/min : 600x15 (400x20) mm : 605 mm : 152x152x13 mm : 50/50 mm : 90x52x13 mm : 5 kW : 2130 mm : 1200 mm : 2200 mm : 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHEC ...

Storemaster Shelf, Master Tower SL 19, pull-out double-sided with crane 6m – used - : Price ex site: 22.500.-€ (net), dismantled and loaded Manufacturer: Storemaster Type: Master Tower SL 19 Year of Make: 2011 Max. possible load per drawer with even distribution: 1,200 daN Max. possible load per rack block with even distribution: 60,000 daN max. possible payload under the vacuum device attached to the 6m crane boom: 400 daN PROJECT NO.: 1101 AS 11459 TwenTower SL with 19 large-format drawers à 1.2 tons load capacity, filling height: 50 mm, Pull-out double-sided - flow barrier not possible, Pull-out rolling beams in MasterTower® SL - - Swivel-in design as standard OverheadTop with 5 large-format forklift spaces of 3 tons each, Overall height: 4,135 mm (UK crane bridge 3500 mm ) TowerGrane system-integrated for max. 400 kg sheet weight with 6 m operating  ...

Turatti Streamer Compact is engineered to produce spiral and noodle-style cuts from vegetables such as zucchini, carrots, and similar produce. Raw material is positioned through a centering device before reaching the rotating cutting head, ensuring stable alignment and full utilization of the product. The system is designed for continuous-duty operation without batch interruption

Cyklop, Twinpack 111 (combination of stretch wrapper and strapping machine) – used - : Ex-site price: 39.500.-€ (net), plus dismantling etc. Manufacturer: Cyklop Type: Twinpack 111 (combination of stretch wrapper and strapping machine) Year of Make: 2020 Operating hours: approx. 300h Former new price: approx. 76.000.-€ (net) Condition: good – very good, little used Available: immediately Location: Dillingen

Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg

Includes 6 insertion trays with dimensions 320 x 630 mm Auction-ID: A1-49785-336

8 pieces diameter 16 mm; 4 pieces diameter 20 mm; 2 pieces diameter 32 mm; unused and in original packaging Auction-ID: A1-49785-198

Shrinkfit; diameter 10 to 12 mm; various lengths/ 22 pieces in total Auction-ID: A1-49785-104

BSP/ Gas Thread Cyclindral 55°/ 1/8\" to 1\" Auction-ID: A1-49785-269

Various sizes and lengths; including torque wrenches 3/8\" and various spare parts/ contents of 2 shelves Auction-ID: A1-49785-354

0.01 mm; 200/225 - 225/250 - 250/275 -275/300 mm Auction-ID: A1-49785-335